im working on a epc 9 build but with a reg AR15 aero lower so i can put a mag conversion so i can SBR just one lower and shoot 9mm & 5.56 with it. also for leftys like me, a reg epc9 lower isnt as lefty friendly as you can build a reg AR15 lower to be
You might not get away with using that trigger. It may not reset. You definitely going to want to change it out for an AR9 designed drop-in trigger. There is a big difference between the 2 have you shot it yet?... happy shooting Brother 😉👊🇺🇸
Just built this. Went with the faxon bcg tho. Get the .22 cmmg conversion kit for ur ar15 it's really nice and u can practice shooting just with .22 for Hella cheap. I paid like 150$ for the .22 bcg and came with 3 mags I highly recommend
I’d have to check. Prices vary based on sales and the discount code I shared. Some of the pieces I had from previous builds. Brownells runs sales and promo codes often so keep an eye out.
After seeing how the hammer wasn't getting reset on your other video it looks like it definitely makes a difference if you're using a PCC trigger I don't know where you got that info from but somebody might have steered you wrong because somebody might have an AR-15 trigger that actually works but that's just a coincidence . That's definitely an exception to the rule not the rule
Totally agree! So many pieces that are similar but not compatible. I learned a lot from this and it's up and running with some new additions to show in a future video. Thanks for watching and supporting.
The feed cone on Aero barrel’s is awful. I had one & changed it out. Definitely try different types of ammo at the range. Aero’s EPC barrel’s don’t like flat nose or hollow points other than Hornady Critical Defense.
@jayweth you need to get a hold of Aero Precision. They now have a Gen2 barrel with an enhanced feed cone that addresses the feeding issues of defensive ammo. I just did a video about it 😉👊🇺🇸
I’m not sure. Brownells usually runs sales on Aero Precision products. Plus the discount code works too. You can get a completed upper and lower and it be just simple 2 pin install.
It's a fucking rifle, we gotta stop playing this game where we allow the government to dictate things arbitrarily and then we play their loophole game. It's a rifle, and they can go fuck themselves...
@@KRYPTOSPOLLARD then he needs to register it with the ATF. He was calling referred to the firearm a rifle which would require him to register it it with the AFT It is a technology a pistol with a brace in its current configuration
@@jefflicciardello1583 I might not have been clear in my previous comment. To be clear, fuck the ATF and their decisions, fuck the NFA and its effects, and furthermore, fuck anybody that threatens the lives of civilians for exercising their natural and constitutional rights. He shouldn't register shit, free people can do as they please.
Consider yourself a leprechaun, you've found the pot of gold with the epc-9 BCG. Because for most it's rarely seen in the wild. Out of stock EVERYWHERE!
Solid last build! Only put together 1 EPC9 and it was cool as heck! They work really well. Great video, enjoy!
Thanks brother. It’s a great build. Need to get some range time with it and put it through the paces.
im working on a epc 9 build but with a reg AR15 aero lower so i can put a mag conversion so i can SBR just one lower and shoot 9mm & 5.56 with it.
also for leftys like me, a reg epc9 lower isnt as lefty friendly as you can build a reg AR15 lower to be
That’s a nice idea. Use an endo mag to support the 9mm but still run 556 with a bolt change.
Pistol or SBR?
@@sranney1 pistol
nice presentation. I just got the Aero EPC9 lower receiver and am planning to complete it in similar setup to you.
I’m really enjoying it next it’s getting painted. 😉
I heard that the barrel has feeding issues and I’m wondering if they still have that issue ?
I haven’t had any feeding issues what do ever. Over 500 rounds so far.
There’s a gen 2 with a larger feeding cone. It isn’t marked anywhere but it’s obvious if you look.
Looks great man!
Thanks fam.
nice gun welcome to the club but make sure you have rigth buffer Waith
@@christophercarrillo6993 been running it for a while and it's a-ok 👌🏻
Great Video. Lov that build! 🤙🏼
Thanks bro. Excited for this one.
You might not get away with using that trigger. It may not reset. You definitely going to want to change it out for an AR9 designed drop-in trigger. There is a big difference between the 2 have you shot it yet?... happy shooting Brother 😉👊🇺🇸
Yep. I have a new video where I mentioned this trigger didn’t reset for me I changed it for a cmc trigger. 🤙🏻
@jayweth just subbed to your channel 👊 ... I'll check out your other videos over the weekend, Brother 😉👊🇺🇸
@@JerrBearTactical appreciate that!
Just built this. Went with the faxon bcg tho. Get the .22 cmmg conversion kit for ur ar15 it's really nice and u can practice shooting just with .22 for Hella cheap. I paid like 150$ for the .22 bcg and came with 3 mags I highly recommend
Great recommendation I’ll look into that to save on the ammo cost.
@jayweth I ended up buying the CMC trigger And I have the same set up as you except for I got the faxon bcg have u heard if there compatible?
I have not heard but you could reach out to brownells they are good with the q&a
What was your total cost?
I’d have to check. Prices vary based on sales and the discount code I shared. Some of the pieces I had from previous builds. Brownells runs sales and promo codes often so keep an eye out.
After seeing how the hammer wasn't getting reset on your other video it looks like it definitely makes a difference if you're using a PCC trigger I don't know where you got that info from but somebody might have steered you wrong because somebody might have an AR-15 trigger that actually works but that's just a coincidence . That's definitely an exception to the rule not the rule
Totally agree! So many pieces that are similar but not compatible. I learned a lot from this and it's up and running with some new additions to show in a future video. Thanks for watching and supporting.
What length barrel?
@@sranney1 11
@ this is the size barrel I planned to put together. I bought stripper areo 9 lowers two of the one will be a pistol the other a rifle
what length barrel is thsi epc 9?
There are many options depending on your need. The great thing as a complete upper it’s easily interchangeable.
The feed cone on Aero barrel’s is awful. I had one & changed it out. Definitely try different types of ammo at the range.
Aero’s EPC barrel’s don’t like flat nose or hollow points other than Hornady Critical Defense.
Good point and idea I’ll definitely be testing various ammo to ensure no issues and swap the barrel out if needed. Thanks for the tip
What barrel did you change to?
@@bobbystewart7070 I haven’t swapped it out. It’s the complete aero upper so it’s their barrel still
@jayweth you need to get a hold of Aero Precision. They now have a Gen2 barrel with an enhanced feed cone that addresses the feeding issues of defensive ammo. I just did a video about it 😉👊🇺🇸
@@JerrBearTactical I’ll have to look into that
Price on that build?
I’m not sure. Brownells usually runs sales on Aero Precision products. Plus the discount code works too. You can get a completed upper and lower and it be just simple 2 pin install.
@@jayweth I'll keep that in mind. Thanks.
@@jayweth what was the length on that barrel again?
@@Antonio-kx5rd I’d have to check my orders. But they come in a lot of options.
My EPC 9 runs great! I've shot lots of different ammo. Not 1 malfunction! Purrs like a kitten!
That’s awesome. I’m excited to take it out to the range soon.
What barrel is in yours
👍🏾 nice!
Hey!! Thanks so much and thanks for watching!
It is not a rifle it is an AR pistol with a brace.
Thanks for the feedback.
SBR now, unfortunately.
It's a fucking rifle, we gotta stop playing this game where we allow the government to dictate things arbitrarily and then we play their loophole game.
It's a rifle, and they can go fuck themselves...
@@KRYPTOSPOLLARD then he needs to register it with the ATF.
He was calling referred to the firearm a rifle which would require him to register it it with the AFT
It is a technology a pistol with a brace in its current configuration
@@jefflicciardello1583 I might not have been clear in my previous comment. To be clear, fuck the ATF and their decisions, fuck the NFA and its effects, and furthermore, fuck anybody that threatens the lives of civilians for exercising their natural and constitutional rights.
He shouldn't register shit, free people can do as they please.
Nice 👍
Thanks so much
Consider yourself a leprechaun, you've found the pot of gold with the epc-9 BCG. Because for most it's rarely seen in the wild. Out of stock EVERYWHERE!
Oh trust me I know. I set an email notification when Brownells has it in stock.
So you didn’t build it. You assembled it.
I did install a new trigger, grip, hand-guard grip and optic. But build/assemble potato potato.
@@parallax3d welcome! And thanks for watching you’ll want to stick around in building a complete AR 15 so that should satisfy your requirements. 🤙🏻
Pistol
Yep. 👍🏻
SBR.
Bro its not a rifle lol quit saying my rifle lol. Its a pistol w a brace
Ah. Check my other videos I address this type of comment.