Very welcome glade all is OK ✌️with feeling better and stuff nice update on the 508 very well done they can be harder to do as you have nothing to film as such 🤣
The parts number catalogues for aftermarket are so badly messed up that it is more accurate to order clutch kits using dimensions and looks than using part numbers.
You are right mate i bought a 4 piece kit from gst car park for semi automatik and flywheel looked nothing like oem. It was valeo kit but once i install it for my surprise it did a job.
Hola amigo cual es la cantidad de aceite que debe de echarse ya que no lo encuentro por ningún lado y el diagnóstico me dice que el nivel de aceite está bajo lleva 2.2 litros debo de echarle más?
hola amigo mío. ¿De qué petróleo estamos hablando? si el aceite del motor debería ser 4.25L si el aceite de la caja de cambios para semiautomático 1.6Ehdi debería ser 2.1L si preguntas sobre el aceite del actuador de la caja de cambios, entonces recuerdo que pedí 2L de fluido del actuador hidráulico y usé poco más de 1L. espero que eso ayude a qué tamaño del motor y caja de cambios tienes también ¿a qué aceite te refieres?
Hola si se trata de un 1.6 ehdi y he echado 2,2 L pero sigue con el fallo y no entra la marcha atrás y difícil encontrar talleres que sepas de este tipo de cajas y vi tus vídeos así que puse a cargar la batería jajaj muchas gracias por contestar un saludo
Hi mate car was in a 130k miles but I also have a 3008 now with only 80k miles and same engine and box and it's already showing symptoms of a same faults coming up and Cluch going so I guess it depends how the car was used by a previous owners.
Hi Your video is more helpful. Can you please advise what is the part no clutch and pressure plates, where did you get them from? I live in Melbourne, wanting to order one for my 508 car, which is currently not driveable due to an acceleration issue from a bad clutch. The pickup is very slow when the RPM goes higher and gets into the Gearbox fault on the screen. Thanks
In gsf car parts a kit of 4 piece part number is VLO837522 but if buying individually parts will have theyr own part numbers i dont know. I do a lot of these now and buy these valeo kits from gsf car parts
Can a replacing the release bearing cause the engine not to start? As my car refuse to start after replacing release bearing. The mechanic told me that it's because it need bleeding before it can start
Glad to hear your better you should put a video of you replacing gearbox thanks
I will do a video's on Cluch replacement on 1.6hdi and 2.0hdi once a days gets longer and it gets a bit wormer.
Looking foward to it cheers
@@wackey3455 thank you mate.
@@Mad4FrenchCars now its warm outside. DEW IT please
Very welcome glade all is OK ✌️with feeling better and stuff nice update on the 508 very well done they can be harder to do as you have nothing to film as such 🤣
Oh there is always plenty to film. Time is always a major issue.
Great to hear Ur better pal. That clutch was beyond gone😳. Interesting stuff, thanks💯✊🏻
Ya the Cluch was worn to nothing.
good job ..good videos..thanks
Thank you mate.
I have a 508 which is showing gearbox fault and showing clutch fault code when tested. I've been quoted £1500 for new clutch is this right 😮
Well yes if a garage does it with warranty then its normally between 1000-1500£ as its very labour intensive job and parts cost around 600£
The parts number catalogues for aftermarket are so badly messed up that it is more accurate to order clutch kits using dimensions and looks than using part numbers.
You are right mate i bought a 4 piece kit from gst car park for semi automatik and flywheel looked nothing like oem. It was valeo kit but once i install it for my surprise it did a job.
Hola amigo cual es la cantidad de aceite que debe de echarse ya que no lo encuentro por ningún lado y el diagnóstico me dice que el nivel de aceite está bajo lleva 2.2 litros debo de echarle más?
hola amigo mío. ¿De qué petróleo estamos hablando? si el aceite del motor debería ser 4.25L si el aceite de la caja de cambios para semiautomático 1.6Ehdi debería ser 2.1L si preguntas sobre el aceite del actuador de la caja de cambios, entonces recuerdo que pedí 2L de fluido del actuador hidráulico y usé poco más de 1L. espero que eso ayude a qué tamaño del motor y caja de cambios tienes también ¿a qué aceite te refieres?
Hola si se trata de un 1.6 ehdi y he echado 2,2 L pero sigue con el fallo y no entra la marcha atrás y difícil encontrar talleres que sepas de este tipo de cajas y vi tus vídeos así que puse a cargar la batería jajaj muchas gracias por contestar un saludo
How many miles/km did you have on the car as this happened? Thank you 👍🙏⚘
Hi mate car was in a 130k miles but I also have a 3008 now with only 80k miles and same engine and box and it's already showing symptoms of a same faults coming up and Cluch going so I guess it depends how the car was used by a previous owners.
@@Mad4FrenchCars Thanks for your answer. I have a 508 with 200000km.
Hi
Your video is more helpful. Can you please advise what is the part no clutch and pressure plates, where did you get them from?
I live in Melbourne, wanting to order one for my 508 car, which is currently not driveable due to an acceleration issue from a bad clutch.
The pickup is very slow when the RPM goes higher and gets into the Gearbox fault on the screen.
Thanks
Hi Mate I have ordered it from Autodoc Manufacturer part number is 828118 and Manufacturer is Valeo
@@Mad4FrenchCars Thanks for the prompt response
@@HM-dz4qh Glad it helped.
Where are you based I need to fix an oil leak in my Peugeot 508 I am in Slough
Sorry man I don't work on other people cars.
Everything OK, just don't get any more LPR parts
Never had before thought gonna give it a try.
What's the parts number for the clutch and the dual mass flywheel please
In gsf car parts a kit of 4 piece part number is VLO837522 but if buying individually parts will have theyr own part numbers i dont know. I do a lot of these now and buy these valeo kits from gsf car parts
عمل جيد جدا شكرا من الجزائر تحيتنا
Thank you brother.
I really need to ask some questions please
Ya ask me if i can i will answer to best of my knowledge
Can a replacing the release bearing cause the engine not to start? As my car refuse to start after replacing release bearing. The mechanic told me that it's because it need bleeding before it can start
Baskı balatamı o