Can I just say this is the most informative video I've seen on the PR machines. I have owned mine nearly 10 years and I was shown by the company that sold me the PR620 to only wrap the thread round the tension disc once and not twice as you have done in your video. They also told me the wrong place to put the oil each day when I turn on my machine. I am so angry now I've seen your video. Luckily it hasn't caused too many issues over the years but does explain some of my problems. Thank you so much for all your advice.
Wow! Thanks so much! I wish you were here in Texas!! When I purchased my Brother, the sales manager or no one else provided any information. I did all the checks you discussed and I’m glad I did. Thanks again
Thanks guys, Your tutorial was really helpful. I’ve owned my machines for 4 yrs . I knew about a few of the techniques you’ve disgusted but there was two or three things I didn’t know. I’ve now saved your tutorial for future reference. 🥂🇬🇧
Crazy; when I bought my Brother PR100e in 2013, I was told I would void the warranty if I did this kind of maintenance myself. I am grateful for the detailed instructions.
This video is so helpful! Some of the things you discuss here I had NO IDEA how to do, or even that they needed done! I discovered this video after I watched and used your video on how to replace the needle threader on the Brother machine. Thank you!!
Thank you so much for this video!! My local technician told me “just oil it and anything else I’ll need to bring to him” but I’ve always done daily and monthly maintenance on my machines so I knew this couldn’t be true even with this embroidery machine. I appreciate your detailed walk-through so much!!! This saved me a fortune in unnecessary service trips for needle changes and lint buildups!!
Thank you so much! I have learned so much by watching your videos. You have taken the fear out of trying to work on my machine myself. Your videos are so informative and you explain things so clearly! Great job!
Thank you for showing step by step maintenance procedures. I never knew exactly where to put the drop of oil in the bobbin area, but now I do. Great video!
The best maintenance video I’ve seen, incredibly informative and answered 3 of my issues I’ve been having recently. Thank you so much, I’ve learnt so much from your video, extremely grateful
Thanks you this was very helpful. The only thing that I did not see was oiling the needle bars. But this was very, very helpful. The cutter under the plate - WOW!
Fabulous little video this Thank you for putting it out on UA-cam. Well you have gained a customer from it so when I'm in need of supplies I'll be on the phone to you 😃
Thank you. I have a PDR1000e and I keep getting wiper errors. This was helpful. I mostly get wiper errors if I am stitching small text in a design. I have changed the blades and what you have shown is a really good reference for the next time I have to do this.
I just got one of these machines Pr600. Person didn't take care of it. Was really dirty, so I know I have to get it cleaned and oiled. Excellent demonstration
Thank you so much for your tutorial! I have always had trouble with my tread cutter and you showed me exactly how to fix it! I appreciate you taking the time to make this video.
Thank you!!! I am having a centering problem and you are now my hero 🙏. I have subscribed to your channel and will continue to watch your easy to understand step by step solutions to everyday problems.
Thank you for this comprehensive video. My automatic needle threader is not working on PR 655. Any suggestions for that please? I am able to thread by hand, but it is inconvenient.
Your videos are awesome. Do you happen to have a way to test the presser foor position on a PR1055X? I'm pretty sure it is bent and needs replacing if it can't be adjusted. I'd love a video on how to replace it. Thank you if you see this message.
I have a Brother PR600II machine. I have a problem when embroidering on the flat right in the middle of embroidering the machine will automatically change to the hat embroidery. Some times I can move the frame back to flat embroidery and some times I can't. I just finished watching you video on making minor fixes and found some things out that I did not know. I'v had all kinds of problems with this machine since day one. It's been to the repair shop a number of times and they would fix the complaints that I have and when I go to the machine the problems start over.
Thank you for your channel sir, it's really very helpful. I have one question sir, I am planning to replace my embroidery PCB PR655. My machine often experiences machine PCB reset. If I replace the PCB, does there need to be any special adjustments? or just replace the PCB and the machine can immediately run normally without any special adjustments. sorry for the length of my question. Thank You.
Good morning thank you for the video. I changed the movable knife and the fixed knife recently however it still won’t cut the thread. I’m still getting trimming sensor error. Can I call you for help please?
Thank you for the wonderful video! I have a babylock emp6, and it's a great machine! I am getting the error when a embroidery motif is done, saying "Impossible to set Start and end points.". The design stitches out fine, and I don't have any other problems with the machine. Any ideas on how to get rid of this message? Thanks
Have you recalibrated the hoops? I've had issues with mine changing between sizes. It's a huge fight for it to take a file from a different hoop size. And the recalibration has to be done several times each time I switch. Now I'm thinking something is up with the sensor
Excellent camera work - I hope to have a 6 or 10 needle machine later this year. Not sure if the cost of a 10 needle will result in significantly greater production/revenue.
Thanks for this… we are getting a quick grinding noise on our second needle. Sometimes when we bring down the threader and other times in the middle of stitching, What could that be? Nothing got stuck, it just started happening.
Hi. This could be a number of problems. The needle bar crank, the top shaft profile cams or the idle pulley gear. All ‘can’ make a grinding noise but aren’t usually localised to a particular needle. We’d suggest a workshop inspection.
Any ideas about weird squeaking noises - sometimes none at all and other times so loud and intense I have to stop the machine for fear it’s going to destroy itself. I oil it as recommended and just can’t figure out why it randomly makes such awful sounds. :(
Hello. Thanks for the most informative video on maintenance of the multi needle machines. I have a question on the automatic threader. Is there a way to replace it without having to take it in for service?
Thank you so much. I got a 10 needle. I read the manual front to back, still was confused on some of the maintenance stuff. I am afraid to break it! I got a wiper error because I threaded the needle wrong when I first started it up, scared me lol!
Thank you so much for this awesome tutorial! I don’t even have a multineedle machine yet. I just wanted to be informed how to do maintenance, before I purchase one. Do you ship to Germany? As „customer service“ isn’t really a part of the german dictionary any longer, I‘d really take into account buying from you, rather than from some local dealer, who doesn’t provide this excellent advice you offer for free. Subscribed!
I am in the US Have a 5 month old Brother PRS100 that suddenly starts giving an error message “check upper bobbin thread” Everything is correct as far as the thread goes. The local authorized dealer that Brother had me taken it to could not resolve the issue. I am thinking possibly the tensioner sensor has gone bad. My question: is this something that you may consider to be the culprit or can it be much simpler than that just being overlooked.
Question. I was given a baby lock emp6. I replaced the needle thread and when threading when the upper thread wiper hook pulls the thread back the thread is wrapping around the hook causing wiper error. Should I replace the Velcro magic tape? What could be causing this problem?
Great Video--I have a PR1050X that makes a squeeky noise when the machine is stitching out and has to move front to back (almost as if the rails needs to be oiled)----do you think this is the case? if so - do you have any videos on this? i have 2 brother machines but just my PR1050x is having this issue. thanks so much!!! do i just regular oil for this rail?
Mark have you found out why it makes a squeaky noise? I am having the same issue and can’t see to figure it out. Babylock says it’s a normal noise but I don’t think it does (comparing to when I first got the machine)
I just got a second hand 620 pr. The door cover on the arm where bobbin is won't shut. Tape holding it. I'm in North Queensland Australia. No service places. Just wondered if I order replacement knives if there's a spring to fix door I could replace
Hi, I have watched your video which was brilliant. I have a week old PR1055x and the needle snapped, tried again on a different located needle and it happened again. Any suggestions would be appreciated…please :)
Thank you so much for this video! Very helpful! Do you mind sharing where you find the new knives, mine is desperately needing new ones, I am getting wiper errors every couple stitches now :(
Hola aprovechando que UA-cam ya tiene traductor, le quería preguntar mi PR650 tiene problemas para cortar el hilo ya cambie, la cuchilla móvil, la cuchilla fija y la lámina que está abajo de la cuchilla fija ósea todo nuevo y sigue teniendo error de leva y no corta, le hice limpieza, la bobina es nueva, tensiones de hilo bien, que cree que pueda ser ☹️
Just found this video. We have a PR1000E, and needle number 3 is hitting the pressure foot. My wife has just not been using that needle but I would like to know if there is an adjustment, or if it is maybe bent, or ??? Thanks in advance!!!
hi there, do you happen to know what is IIC_FRAME_UNIT error when turning on the PR670E? how do i resolve it? the brother personnel doesnt know how to do so..
Do we oil the disk thats above the needle. I heard we should do that also by pulling each needle bar down and place a drop of oil on top of that disk? Is that correct?
This helped me sooo much!! For someone who is learning this machine simply on UA-cam!! Thank you!!
Thanks for the video very helpful. This guy’s voice is well-modulated so it’s quite pleasing to the ears.
Brilliant video! Best PR guided maintenance I've seen. Very in-depth, great detail, perfect lighting. You guys did a great job. Thanks so much.
Can I just say this is the most informative video I've seen on the PR machines. I have owned mine nearly 10 years and I was shown by the company that sold me the PR620 to only wrap the thread round the tension disc once and not twice as you have done in your video. They also told me the wrong place to put the oil each day when I turn on my machine. I am so angry now I've seen your video. Luckily it hasn't caused too many issues over the years but does explain some of my problems. Thank you so much for all your advice.
THANK YOU FOR DOING THIS. YOU DID AN AWESOME JOB. I AM pretty sure that I can do it👏👏
Thank you, this is the best tutorial! I live in Sweden and have had the machine for five years without knowing this 😮
The very best video I have seen! Thank you so very much for your clear explanation of each maintenance task. I only wish your shop was here in the US.
Wow! Thanks so much! I wish you were here in Texas!! When I purchased my Brother, the sales manager or no one else provided any information. I did all the checks you discussed and I’m glad I did. Thanks again
Thanks this is a great video to keep the machine clean and maintain
Thanks guys, Your tutorial was really helpful. I’ve owned my machines for 4 yrs . I knew about a few of the techniques you’ve disgusted but there was two or three things I didn’t know. I’ve now saved your tutorial for future reference. 🥂🇬🇧
Crazy; when I bought my Brother PR100e in 2013, I was told I would void the warranty if I did this kind of maintenance myself. I am grateful for the detailed instructions.
This video is so helpful! Some of the things you discuss here I had NO IDEA how to do, or even that they needed done! I discovered this video after I watched and used your video on how to replace the needle threader on the Brother machine. Thank you!!
Thank you so much for this video!! My local technician told me “just oil it and anything else I’ll need to bring to him” but I’ve always done daily and monthly maintenance on my machines so I knew this couldn’t be true even with this embroidery machine. I appreciate your detailed walk-through so much!!! This saved me a fortune in unnecessary service trips for needle changes and lint buildups!!
It’s not an easy machine to transport. Just bring big it to me. Easier said than done. LOL.
@@sandreawhite7534 exactly! 😂 “sure, I’ll just toss it in the car and head that way.” 👍🏼🥴
Thanks Bamber! That pesky red frame sensor was just about driving me mad! All working fine again now.
Thank you! saved me a trip to the shop to fix my wiper error!
I have a PR600 11 with just 181 hours on it. I was shy of using it before I saw the video so thanks so much. She up and running well.
Thank you so much! I have learned so much by watching your videos. You have taken the fear out of trying to work on my machine myself. Your videos are so informative and you explain things so clearly! Great job!
I appreciate the fact that you show what to do and tell why you do it. Really good video. Thank you.
Thank you for showing step by step maintenance procedures. I never knew exactly where to put the drop of oil in the bobbin area, but now I do. Great video!
A trick: watch movies on flixzone. Been using it for watching loads of movies during the lockdown.
@Dwayne Brady yea, have been watching on flixzone for since november myself :)
@Dwayne Brady Definitely, been watching on Flixzone for months myself =)
The best maintenance video I’ve seen, incredibly informative and answered 3 of my issues I’ve been having recently. Thank you so much, I’ve learnt so much from your video, extremely grateful
Thanks you this was very helpful. The only thing that I did not see was oiling the needle bars. But this was very, very helpful. The cutter under the plate - WOW!
Thank you so much. I just got a wiper error and using your video, I noticed the thread cutter had loosened and turned around.
Fabulous little video this
Thank you for putting it out on UA-cam.
Well you have gained a customer from it so when I'm in need of supplies I'll be on the phone to you 😃
Thank you. I have a PDR1000e and I keep getting wiper errors. This was helpful. I mostly get wiper errors if I am stitching small text in a design. I have changed the blades and what you have shown is a really good reference for the next time I have to do this.
I just got one of these machines Pr600. Person didn't take care of it. Was really dirty, so I know I have to get it cleaned and oiled. Excellent demonstration
Great video! All the instructions I've seen have different instructions for the oil. :(
One of the best how to videos I have seen
Thank you, really helped me understand problems that I have been having.
Very informative and helpful I just bought new single head embroidery machine A-1501from China.
Thank you so much for your tutorial! I have always had trouble with my tread cutter and you showed me exactly how to fix it! I appreciate you taking the time to make this video.
Thank you. Should be the first thing taught to us.
Thank you!!! I am having a centering problem and you are now my hero 🙏.
I have subscribed to your channel and will continue to watch your easy to understand step by step solutions to everyday problems.
We really need more videos on this machine or Pr older series. There is literally no videos on Pr600.
i am confusing which brand i will buy tajima or brother.but when i watched this is really helpful.
You have been fine night and shining armor. Please do some more videos on the operation of the machine. I am really struggling with appliqué.
Thank you.
I am so grateful you took the time to make this video. Thank you!
Great video, clear and concise. Thank you very much. Will definitely be having my 10 needle serviced by you as well as my other standard machines.
Thank you for this comprehensive video. My automatic needle threader is not working on PR 655. Any suggestions for that please? I am able to thread by hand, but it is inconvenient.
Your videos are awesome. Do you happen to have a way to test the presser foor position on a PR1055X? I'm pretty sure it is bent and needs replacing if it can't be adjusted. I'd love a video on how to replace it. Thank you if you see this message.
Excellent video. Thanks so much.
I have a Brother PR600II machine. I have a problem when embroidering on the flat right in the middle of embroidering the machine will automatically change to the hat embroidery. Some times I can move the frame back to flat embroidery and some times I can't.
I just finished watching you video on making minor fixes and found some things out that I did not know. I'v had all kinds of problems with this machine since day one.
It's been to the repair shop a number of times and they would fix the complaints that I have and when I go to the machine the problems start over.
Thank you for this video. I recently bought a used PR1000e and this is very helpful.
Thank you so much for this video!!! GREAT lesson! I learned very valuable information. I'm saving this video.
Thank you so very much for your video. So much more aware now how to maintain it.
I am desperately want one of these machines. This video is great.
Really great informative video and super nice company, they are really helpful and I would not hesitate to recommend these guys.
Thank you for your channel sir, it's really very helpful. I have one question sir, I am planning to replace my embroidery PCB PR655. My machine often experiences machine PCB reset. If I replace the PCB, does there need to be any special adjustments? or just replace the PCB and the machine can immediately run normally without any special adjustments. sorry for the length of my question. Thank You.
Thank you. Best video on the PR!
Thank you
Good morning thank you for the video. I changed the movable knife and the fixed knife recently however it still won’t cut the thread. I’m still getting trimming sensor error. Can I call you for help please?
Thank you for the wonderful video! I have a babylock emp6, and it's a great machine! I am getting the error when a embroidery motif is done, saying "Impossible to set Start and end points.". The design stitches out fine, and I don't have any other problems with the machine. Any ideas on how to get rid of this message? Thanks
Fantastically informative video, thank you so much. ❤❤
Thanks so much I have a used PR 100. The service center will not service because I not the original purchaser.
When the embroidery bar moves, it squeaks as though it needs oiling/greasing. How can I do that at home? I appreciate your videos, Steve. Thanks
The back wheel of my machine squeals. Do you have a maintenance video for that?
Brilliant video Steve, must get mine booked in for servic
Thank you from Alberta Canada. Learned a lot as I bought my pr650e used. Question on where to oil under the front plate?
This has been so helpful! Thank you!
Have you recalibrated the hoops? I've had issues with mine changing between sizes. It's a huge fight for it to take a file from a different hoop size. And the recalibration has to be done several times each time I switch. Now I'm thinking something is up with the sensor
@@kozzy142 I have not recalibrated the hoops. I was having problems with the cutters.
Thanks for a great video. Do you have tips on how to solve problems with loops on the embroidery?
This was great! I have a 10 needle and this is very helpful. How would you change a knife on the atomic thread cutter on the Brother Dream Machine?
Thank you so much for this.. I had a trimming error and didnt know how to fix it, turns out the cutter was blocked with threads
Wonderful information. Thank you for a great video
Great video and advice Steve.
Wonderful video. In the book it says to oil the needle shaft, do you recommend this?
Excellent camera work - I hope to have a 6 or 10 needle machine later this year. Not sure if the cost of a 10 needle will result in significantly greater production/revenue.
Thank you for your helpful information! 🤗
Thanks God i found you! My machine have a main motor current error what should I do?
Thanks for this… we are getting a quick grinding noise on our second needle. Sometimes when we bring down the threader and other times in the middle of stitching, What could that be? Nothing got stuck, it just started happening.
Hi. This could be a number of problems. The needle bar crank, the top shaft profile cams or the idle pulley gear. All ‘can’ make a grinding noise but aren’t usually localised to a particular needle. We’d suggest a workshop inspection.
Thank you so much. Very good clear and useful instructions
Thank you that was very informative. My question is how do I get trapped piece of thread that is in the case it’s hard to get out. It’s very trapped
Thank you for this. But what about if the needle threader won't thread the needle?
Very informative - a must watch!
Any ideas about weird squeaking noises - sometimes none at all and other times so loud and intense I have to stop the machine for fear it’s going to destroy itself. I oil it as recommended and just can’t figure out why it randomly makes such awful sounds. :(
Hello. Thanks for the most informative video on maintenance of the multi needle machines.
I have a question on the automatic threader.
Is there a way to replace it without having to take it in for service?
Hi Jane, Thank you for the kind words. Maybe this video will help you. ua-cam.com/video/5MVNhxmZr1Q/v-deo.html
Thank you for sharing it was very informative
Thank you so much. I got a 10 needle. I read the manual front to back, still was confused on some of the maintenance stuff. I am afraid to break it! I got a wiper error because I threaded the needle wrong when I first started it up, scared me lol!
How do I secure the fixing plate to transport. I can’t seem to get the carriage in the correct position.
Thanks. Great video. It's very helpfully for me. Clear speaking and i can it good translate for me in german. Thanks.
I have a brother 680 and got it last year
Hello, Yes you can phone us. 0161 707 7786
What a great informative video. Thank you very much.
thank you for all this info it was really useful
Due to hand surgery I have not used my PR 620 for over a year. Where besides the bobbin case should I oil.....I had it covered up Judit
EXCELLENT VIDEO....Thanks
Thank you so much for this awesome tutorial! I don’t even have a multineedle machine yet. I just wanted to be informed how to do maintenance, before I purchase one. Do you ship to Germany? As „customer service“ isn’t really a part of the german dictionary any longer, I‘d really take into account buying from you, rather than from some local dealer, who doesn’t provide this excellent advice you offer for free. Subscribed!
Can you do a video on why the sensor won’t read a jig hat hoop ? I’m having issues with mine. TY
Excellent video! Thank you!
I am in the US
Have a 5 month old Brother PRS100 that suddenly starts giving an error message “check upper bobbin thread”
Everything is correct as far as the thread goes. The local authorized dealer that Brother had me taken it to could not resolve the issue.
I am thinking possibly the tensioner sensor has gone bad.
My question: is this something that you may consider to be the culprit or can it be much simpler than that just being overlooked.
Question. I was given a baby lock emp6. I replaced the needle thread and when threading when the upper thread wiper hook pulls the thread back the thread is wrapping around the hook causing wiper error. Should I replace the Velcro magic tape? What could be causing this problem?
Great Video--I have a PR1050X that makes a squeeky noise when the machine is stitching out and has to move front to back (almost as if the rails needs to be oiled)----do you think this is the case? if so - do you have any videos on this? i have 2 brother machines but just my PR1050x is having this issue. thanks so much!!! do i just regular oil for this rail?
Mark have you found out why it makes a squeaky noise? I am having the same issue and can’t see to figure it out. Babylock says it’s a normal noise but I don’t think it does (comparing to when I first got the machine)
Thanks that was very enlightening much appreciated
Is there a way to replace the light pointer… on a PRS 100? Mine has gotten very dim.
Thank you
I just got a second hand 620 pr. The door cover on the arm where bobbin is won't shut. Tape holding it. I'm in North Queensland Australia. No service places. Just wondered if I order replacement knives if there's a spring to fix door I could replace
Hi, here's the link...bambersew.com/product/brother-pr-raceway-door-spring/
Hi, I have watched your video which was brilliant. I have a week old PR1055x and the needle snapped, tried again on a different located needle and it happened again. Any suggestions would be appreciated…please :)
Hi Kim, Are you in the UK?
If so, please phone the shop on 0161 707 7786. If not, please email steve@bambersew.com Thanks.
Thank you so much for this video! Very helpful! Do you mind sharing where you find the new knives, mine is desperately needing new ones, I am getting wiper errors every couple stitches now :(
www.bambersew.com/brother-pr-fixed-knife--clip-1458-p.asp
Hola aprovechando que UA-cam ya tiene traductor, le quería preguntar mi PR650 tiene problemas para cortar el hilo ya cambie, la cuchilla móvil, la cuchilla fija y la lámina que está abajo de la cuchilla fija ósea todo nuevo y sigue teniendo error de leva y no corta, le hice limpieza, la bobina es nueva, tensiones de hilo bien, que cree que pueda ser ☹️
Just found this video. We have a PR1000E, and needle number 3 is hitting the pressure foot. My wife has just not been using that needle but I would like to know if there is an adjustment, or if it is maybe bent, or ??? Thanks in advance!!!
I'm having this problem with needle 2. Help
1
hi there, do you happen to know what is IIC_FRAME_UNIT error when turning on the PR670E? how do i resolve it? the brother personnel doesnt know how to do so..
Do we oil the disk thats above the needle. I heard we should do that also by pulling each needle bar down and place a drop of oil on top of that disk? Is that correct?
Im getting whiper error and it doesnt cut my thread. I have cleand all the lint and changed the fix knife but it still wont cut
Thanks alot ive really helped me
Brilliant, thanks!!
Ótimo vídeo 🇧🇷
Thank you so much for this.