BAD INFLUENCE Rock Bouncer Build by Busted Knuckle Off Road
Вставка
- Опубліковано 22 сер 2024
- When Matt Schuessler came to us with a Rock Bouncer Build in mind we knew we had to go all out. Since he is no stranger to the Southern Rock Racing Series Podium we knew Jake Burkey and our team was going to have to pull off some top notch fabrication. We started with our Jake Burkey Riot Buggy Race Chassis and quickly built two Steering Dana 80 axles to go underneath it. Then the mother of all LS engines arrived. We stuffed a 454 LSX Supercharged engine capable of over 1400 Horsepower under the engine cage backed by a powerglide transmission and SCS straight drive case. This will allow him to be competitive with his brother in law who owns and drives the Gold Rush Rock Bouncer. After all that we did some slick custom interior work that is sure to turn heads at the next rock racing event. This might be the baddest Busted Knuckle Rock bouncer to ever roll out of our shop. Stay tuned because on the next episode we will be putting it back together after powder coating and then it's DYNO DAY!
#BadInfluence #RockBouncerBuild #BKORbuilt
Official Busted Knuckle Merch - www.bustedknuck...
BKF Facebook - / bustedknucklefilms
INSTAGRAM / bustedknucklefilms
SNAPCHAT- / bustedknucklefilms
Big Thanks to our sponsors
www.bustedknuck...
Gold Rush is an absolute beast so with “mad-man Matt Schuessler” and his heavy foot this should be awesome.
We can't wait to see him race it.
These are by far your best videos please focus more on these videos!!!!! I hope new attitude has the same headers the old buggy had!
We plan on doing these videos for every turnkey build that we do and they will continue to evolve and get better. Thanks for the props!
And no 180s on this one, there just wasn't room.
@@BustedKnuckleVideo it is awesome the way you explain the important key information about how and/or why you make a decision in the design. and how you explain the importance of the order of the build.. i would love to build some these buggies and hope to some day soon. keep up the fantastic entertainment and education, thanks!
Thanks! Next up is a trail rig.
Agree man, I love these build videos.
So friggin cool, Jake does a great job of explaining his builds. Christians buggy is a killer. Can't wait to see this bad boy rip the hill's ass a new one.
This one should be very competitive.
That is so sick looking and this is the first time I am see what it takes to make one
Austin Bob we did one on gold Rush as well.
super nice work, Matt is an all out racer and it's going to be entertaining can't wait, competition is heating up big time!
We can't wait to see what he thinks of it!
Missing you out having fun in a buggy love these builds keep up the great job
we will be back in one soon
Totally agree, gold rush, the Italian job, this buggy. Amazing builds, but Jake is a crazy driver. Seems everybody had to bring there A-game to stay competitive!
Eu adoro ver toda esta imagens da construção destes carros maravilhosos que vocês constrói. Parabéns pra vocês.
You guys do incredible builds
Thanks!
Absolutely beautiful
Thank you! 😊
That's one impressive build . I can't wait until your next video . Matt is going to be tearing it up with this one . I'm going to miss the sound of those 180 degree headers though . Until next time take care .
We wanted them to be on there too but it just did not make sense for this race build.
I had a 789 stroker buggy with a dual cam bypassed carb ,a dual injection synthetic clutch ,I had it double bypassed with flowmatic extra duty cherry bomb exhaust ,man that thing could break you're dam neck
sounds impressive LMAO
Wow that is some serious axle!
Pure Beef
very nice
It turned out killer
very nice job!!!
Thank you!
Very nice buggy bro ilike that buggy by the way new subscriber here from philippines 🇵🇭 bro.
Thanks for the sub!
Welcome brother hope some day i have mu own buggy this my dream brother
Absolutely awesome.
Work of Art
What type of tubing bender do you use?
So wanted to build a buggy frame like this for a while but in the configuration of a flatbed so one could carry some stuff with into the trails.
our ride chassis has a slight bed in the back to carry tools and a cooler
great job nice machine
Thanks!
What would a buggy cost for someone new to the sport? Like a cheaper build with just a 500 600 hp motor that can take a beating but not the most expensive parts ever. Would be more of a hobby then trying to win money but i would still want to compete every so often.
For us to build one they would start around $100k
Amazing
Thanks
That motor coast more than my intire jeep build truck and all its nasty im happy for u
That's racing
Absolutely outstanding. Top on UA-cam 👍👍
Thanks Jeff!
nice looking horse pressure
all them horsepressures
Hell Yea Nice work..
We are super happy with how this one turned out
Hello, I was just curious, aside from full builds do you guys ever do major repairs after crashes? That would make for an awesome video as well, to see some Rockbouncer (surgery).
We do maintenance and repair work on the race rigs that we have built. This one has broken a few parts that we have never seen break before. Most recently he twisted the splines on an SCS gear box.
.....when toughts and dreams come true😍
Full finished vid with dyno and shock tuning action should be out tomorrow so stay tuned
@@BustedKnuckleVideo 😍😍😍😍😍😍😍😍😍😍😍😍😍👍
ua-cam.com/video/VAwf8ljwVc0/v-deo.html
We need the dyno and shock tuning vids please, hanging to hear this thing
Hoping to premiere the video later today!
Badass build!!!
And awesome dog 🐕!! I also have a Blue Heeler!!
Sadly she was hit by a truck not long after this video was shot, she was an awesome dog.
@@BustedKnuckleVideo It's very sad to hear that.
Sorry for your loss!
Thank you.
BustedKnuckleVideo I’m sorry for your loss. I also have one what such caring dogs they are. Truest dog to their owners I’ve ever seen. Great fab work wow!
I love your videos
Thanks!
Ooo if i could aford to build one i would some day im a iron worker and quit drinking cant build toys for few years but some day ill be ahead and can build one ive got some sick toys i built few years ago but now im building stuff like flatbed trucks and by dayly car needs repower
they are fun but a lot of work
Thanks
No problem
How do the chassis usually cost? Like straight out the door?
around 5500 depending on what all you want included
Nice hat!!
We sell them at www.BustedKnuckleGear.com
These guys should make a koh build
If we get the right client we would be happy to build a KOH car.
I would love one for on and off road.
we are working at making them more affordable
Is the Riot chassis the same as the Goldrush rig?
It is
What length coilovers are on bad influence?
Zach Mosteller 16
@@BustedKnuckleVideo ok thank you
anytime
What grade of steel do you use for the chassis? Do you use chromoly or just mild steel?
DOM steel
Is there any particularly and specific reason ,why the engine bay is front or side the body ( most of em ) and not in the rear dude?
hill climbing seems to be better with a front engine
Perryville, MO boys are making a statement!
They've got some of the baddest buggies on the planet
They have to be to try and beat that Hellbent buggy out the top.
his time is coming. Stay tuned!
I been watching the TC buggies along time and his driving style sounded identical to the test run on Matt driving bad influence up the test run hill. I will bet if he keeps that kinding of driving up no doubt in my mind Schuessler will be top 3 week after week. This guy has what it takes to place. I guarantee it. Runs like that is what keeps me coming back to watch this sport.
Pinned for the win. Worry about what you broke later 👍
Waiting Patiently..
Note to self.....Get Rich and Buy These Rides!
what are you waiting on? this buggy is finished- ua-cam.com/video/VAwf8ljwVc0/v-deo.html
So when Jake does the pinion angle and points it at the transfer case, does he get within and angle of 2 degrees with an angle finder? Reason I ask is b/c my tacoma has a 3 inch lift with some serious drive shaft vibration. Figured if i shimmed the rear axle 2 or 3 degrees that would take care of it, but not sure.
he gets it pretty dang close
Awesome build, The front of my buggy is around 14% heavier than rear. What's the magic formula good buddy?
50/50
more strong 💪
just wait until you see the dyno pulls
@@BustedKnuckleVideo I can not wait
Should have that video up soon as well
@@BustedKnuckleVideo 🙏🙏
Are we ever gonna to see the riot buggy getting nasty again?
The Riot buggy was Sold, Jake want's to build a trail bouncer next and get back to riding
454. Power
LSX454
Big like yehhhhhh
👊🔧
How much for that beast got to be about 150 000
That's pretty close
@@BustedKnuckleVideo it's sick as hell can't wait to see the rest of the build its going to be a screamer
The color combo he chose makes it look amazing
BustedKnuckleVideo 😳😳
250k is my guess
Where do you put turn signals?
I'd just have to take this down the street
how long are your front links and what is the wheelbase?
125" wheelbase
Nice
Thanks!
Mahal ya habisnya kayak gtu itu
No lie I would take a Jake Berkey built buggy over a TC buggy no joke I've watched him build several of these and I don't think there's a better built one in the world!
Thanks Rusty. The level of detail on these is unlike anything else I've ever seen.
In good way
For sure
Where do the ac/heater vents go?
why would you need AC or heat in one of these? You could do heated seats I guess
Will I out do the attitude buggy? I don't think so says a bias person
I don't think the attitude buggy is anywhere close to this one
Are you guys using a mud racing series fti power glide in this build? or is it cusom?
It's custom
Taped up so it doesn’t get scratched lol how does it look after the first run!!
It has to look show quality for it's photo and video shoot. Stay Tuned.
BustedKnuckleVideo 🤘🏻👍
bit.ly/BadInfluenceBKOR
How much do these things cost to build?
100k plus
Sweet but bring all of us som build content PLEASE❗
More build content on the way!
@@BustedKnuckleVideo
Thanks guys wish i could work for your shop
we are always on the hunt for skilled fabricators
What's the final curb weight for this buggy?
around 4400 lbs
What pipe diameter is recommended, and can I use 6013 welding?
1.75
Great video! What controls are you using for your rear steer? I need an electric over hydro setup. This manual "log splitter" type valve I have sucks.
This is what we use. Works flawlessly
bustedknuckleoffroad.com/Electric-Rear-Steer-Kits_c477.htm
These are the best rear steer systems period.
BustedKnuckleVideo Thanks for the reply guys!
always
This. This is great UA-cam content! I'm watching your 'Project Mall Crawler' video, but which of your "non-buggy" videos would you recommend I watch? (I'll get to them all, just curious which is your favorites.) Have you ever done (or would you do) a street-legal budget build? Again, great content.
WE are looking into doing a Jeep Grand Cherokee build for fun, check out our Bronco Prerunner Project as well.
That is a great platform. Not that you asked, but I would love to see a Suzuki Samurai build from you guys. I’d be curious of your approach and where you’d focus to get the most “bang-for-your-buck” on these little rigs. Would you focus on power or tire/suspension? Just random thoughts! I clicked that little, what do you call it... “bell”!?! Can’t wait to see more. Thanks!
A Samurai would be a fun build.
@@BustedKnuckleVideo a jeep grand cherokee build would be awesome ! (this is comming from a xj/tj owner) i just dont see as many really good grand cherokee builds around
I think a XJ vs ZJ build off would be fun
What's the smallest motor in bouncer that's still competitive I'm looking at a bouncer found a good deal but it just has a built 5.3
to be competitive you'll need atleast a 408 stroker and some dialed in suspension
How much does it cost to have a buggy built for some one
They start at 85k turnkey out the door base model
@@BustedKnuckleVideo wow did not know they cost that much oh well it would been fun to try one tho thnx
sounds a little like he's using a flat crankshaft , Is it?
nope
What is the cost of an engine and transmission like that???
20-30k
I want to do this stuff so bad. How does one get started??
start with a pile of tubing
Me puedes mandar el presio del chasis nada más gracias
What's the total cost of building this from scratch?
$100k plus
Have you guys ever thought about following Clayton Hollingsworths design.....
It worked in some situations but not all, Solid axle rigs continue to dominate the sport so why change?
Probably the question wondered by a lot of us that watch. I think Clayton is just that good of a driver honestly. He came on the scene and seemed like the ultimate competitor for ole Timmy! Wes keen has a really low center of gravity buggy too, without IS suspension, but again he is an awesome driver!
Clayton could drive no doubt, there is another independent suspension buggy in the works that is fully CAD designed and might change the sport, we shall see.
tell me where you can buy a Rock Bouncer drawing???
no one sells drawings but you can buy a chassis from www.bustedknuckleoffroad.com
इस कार की प्राइस कितनी है और कहां पर उपलब्ध है
They start at $85,000 USD and can be purchased from www.BustedKnuckleOffRoad.com
Hi bro... what engine are you using?
machine?
@@BustedKnuckleVideoyes engine...
this one has a supercharged LSX454
ok thanks bro...
This is has a supercarged this Yang ini memiliki supercarged
Is he selling attitude?
I would assume so.
i wish to work with you guys.
we are always hiring
badd to the bone
ITs a Beast
Wat is the wege lv (poid en fr)
What tires are those
43 SX stickies Cut
How Much $$$ and time are we talking to duplicate this build?
Over 100k
Q moto vcs usam
Brasil
We can ship.
Without money:(
that's no bueno
BustedKnuckleVideo brasil não e facil tivesse dinheiro ia ai ver as provas meu sonho portugues usa tradutor
The points of this video that you try and talk all cool makes me want to yak I much prefer when you speak direct and plainly
not sure what you mean
Sorry, more car less face time, reminds me of Overhaulin' all faces with a car background. Constrictive criticism gives this one a big thumbs down...... love your videos Matt just not this one.
to each their own, can't make everyone happy so I just make videos that I like.
You powder coated it the night before delivery? Lol
All jokes, love the content man I wish y’all the best.
The week before delivery.
No 180”s???..... I want my $ back!!
No performance gain, they were only going to cause problems.
BustedKnuckleVideo yea... but...but... but... DAT SOUND!!!
sound wasn't worth sacrificing heat soak and packaging issues
LSX means 454 so you keep saying 454 454. Let's put this 454 454 in now lol
Does it though?
What you thank 20 pounds of BOOST???
14 pounds of boost
Wooo 14 its still beast mode .. gonna be big hp numbers . Can't wait.👍
it has decent dyno numbers, It's no Gold Rush but it is very driveable
It's hard to believe that people "build"(or whatever it is you do to your mom's Nissan to make it better for burnouts) drift cars...sad really.
I have respect and appreciation for anyone that wants to modify their vehicles to fit what they like to do.
What are you guys slave owners........ feed them better.
feed who better?
It was a joke about your hungry helpers.
music sucks
I know you really wanted backstreet boys but this is the music most of our fans prefer 😉