After the introduction and three minutes into the video I knew that I was seeing something very special here! The meticulously precise craftsmanship and superb attention to detail led me to immediately subscribe to this channel. Workmanship of this calibre is an absolute joy to see!
Really sucks losing use of my muscles right at the age when I was planning to order an RS chassis. So many things are much better with legs and arms that work, but working on and driving a car was on top of my list. These videos are a double edge sword to me but if I don’t watch them I might have less of a reason to fight. I got rid of my Divco and 50 Ford Shoebox but I still have my 70 T-Bird for when someone finds a cure. This is a great chassis and project in general. It’s hard to spend a lot more than you could get back on a Bronco these days, unlike my T-Bird.
Vehicles have been adapted to enable people with significant mobility restrictions to drive. Joystick control is just one such technique, but many more exist, even using eye scanners to control vehicles. There may yet be the means to enable you to drive, even if it isn't as you would have preferred, such as having full muscle control. Age, disability and ailments may rob us of the things we held dear, but there may yet be the means to get you on the road. Kind regards from London.
That’s super awesome. But… Do you think you could do like a level 1 and 2 chassis build for K10, 20 and F series and Rangers? I love the balls to wall build ups but most of us folks want to drive and work out old trucks every day. We love the modern power and want or need a new chassis that can work, tow and, haul. Leave springs work great when the geometry is optimized with proper shackle angles and ark. Modern shock placement and technology can really bring classic steel back to greatness. Just saying…
COME ON! You can't just show us a bad ass chassis build without showing a TOTAL bad ass Bord Bronco build on that bad ass chassis. I want the FULLLLLLL build!
This one is heading out to a customer and we will hopefully see pics when its done - if you need an RS bronco fix, check this bad boy out! - roadstershop.com/galleries/bronco/
So once a valve goes out on those struts you're back to lemon twists? I was going to ignore this whole thing if it didn't have reverse shackle leaf springs. Otherwise, God bless 120mph in it!
Beautiful craftsmanship and engineering but.....not a whole lot of Bronco (other than the body?) left after all that. I've had my '74 for 35yrs now, looks kinda beat but, it's an offroad beast. 2 things that I'm not too keen, on 6 lug hubs and after all that first rate stuff, no RCVs? Would like to see the finished truck, though. Nice work!
You can just call me for my address and send that right on over lmao. Absolutely stunning chassis that I have no use for but still want to hang it in my living room as art. And yes I am serious.
I dreamt a very similar chasis after watching 👀🤔 your 750 h.p. survivors series pick up truck test/run through. My vision was all G.M.C./CHEVY. A full 4X4 2500 series. Thank You. When can we see this beautiful chasis with body make some noise ❔❔❔ Just ring my bell 🔔. 💚💙💜. 👍👌✌🏻 🙋♂️ 🇨🇦 👨🦽 😎. P.S. 🔥 ☕ 🕒 😛.
Si tout' bricoleur pouvant construire nos véhicules comme ont voudrait mais danger les règles en sécurité sur la route ou pour autruies'mais encourageront les rêveurs sur les projets&réalisations?????
How much of the original Bronco is left ? Seems like the current fad is throwing most of the car away and reusing the body only . Awesome if you can afford it .
MERICA!!!! 💯🍻😝🎸🎶 high quality control👍 i jst pulled a 84 c10 out a field after 20yrs.... any help wuld b hot, front end specially. dont wanna use china shit from these parts houses.... will b slammed on ol school rallys, t10 stingray,fresh. sb400 w461z, 12 bolt w 2:79... want it 4 drvn. front end is worn comletely out.
@@dendenov743 я эт заметил!!! Тогда пусть просто рычаги приварят чтоб имитировать балку и будет им счастье!!😂😂😂😂 А то, то лом туда вставят, то трубу!!! Он должен чуть скручиваться о они стабилизатор лишают характеристик стабилизатора!!!))))))) Сразу вспоминается М. Задорнов!))))
Wow, Are you a jeweler or a frame builder?
8yu
@@Atabika-ox7fj ñp
@@Atabika-ox7fj ññ
0ññññ
Ñ0
After the introduction and three minutes into the video I knew that I was seeing something very special here!
The meticulously precise craftsmanship and superb attention to detail led me to immediately subscribe to this channel.
Workmanship of this calibre is an absolute joy to see!
Undoubtedly, definitely , a unique, unprecedented, unparalleled, magnificent masterpiece.
This is the type of art i would pay for
loved your craftsmanship since rampage
Really sucks losing use of my muscles right at the age when I was planning to order an RS chassis. So many things are much better with legs and arms that work, but working on and driving a car was on top of my list. These videos are a double edge sword to me but if I don’t watch them I might have less of a reason to fight. I got rid of my Divco and 50 Ford Shoebox but I still have my 70 T-Bird for when someone finds a cure. This is a great chassis and project in general. It’s hard to spend a lot more than you could get back on a Bronco these days, unlike my T-Bird.
Vehicles have been adapted to enable people with significant mobility restrictions to drive.
Joystick control is just one such technique, but many more exist, even using eye scanners to control vehicles.
There may yet be the means to enable you to drive, even if it isn't as you would have preferred, such as having full muscle control.
Age, disability and ailments may rob us of the things we held dear, but there may yet be the means to get you on the road.
Kind regards from London.
Everything you guys build is perfection.
Very well done ! Great skilled labor and pride in work is hard to come by now days❤
Excellent job buddy congratulations. That’s a excellent company. High performance and quality.
Brilliant edit and videography, what a masterpiece !
I have a 71 c10 that I'm really thinking of putting on an rs4 chassis
Awesome!! Give us a call and we can go over the options.
That’s super awesome.
But…
Do you think you could do like a level 1 and 2 chassis build for K10, 20 and F series and Rangers? I love the balls to wall build ups but most of us folks want to drive and work out old trucks every day. We love the modern power and want or need a new chassis that can work, tow and, haul. Leave springs work great when the geometry is optimized with proper shackle angles and ark. Modern shock placement and technology can really bring classic steel back to greatness.
Just saying…
COME ON!
You can't just show us a bad ass chassis build without showing a TOTAL bad ass Bord Bronco build on that bad ass chassis. I want the FULLLLLLL build!
This one is heading out to a customer and we will hopefully see pics when its done - if you need an RS bronco fix, check this bad boy out! - roadstershop.com/galleries/bronco/
@@RoadsterShop WHAT AN BEAST OF AN BUILD!!
Awesome! Really appreciate watching it go together like that. Only problem is now I want one under my Bronco.
Съемка на хорошем уровне👍
Fantastic quality craftmanship 😊
Outstanding craftsmanship!!!
That's some quality parts, craftsmanship and pride coming together all at once!🏁🏁💯💯
Not a Ford or Bronco Fan, but excellent craftsmanship. Hope to see the finished build too?
Never seen that before at 5:29, what is it...
Выглядит шикарно
Trabajo exquisito ..una obra de arte !!!
i love this chassis,its perfect,keep it up.
Wow loved the video! Need more of these assy videos! Maybe a fast track irs for a chevelle wagon....... 😉😉😉😉
MIND BLOWN 😳
GREAT VIDEO, YOU GUYS ARE AWESOME, GREAT WORK
I Love You RS... nice job... That my dream cars... OMG... I from Indonesia
Awesome Chassis!
That's an awesome chassis I'm sure it's got a hefty price I would guess $50.000.
double that
@@steveschilling5966 going on their website it states $39,995
Super clean! I'll take it!
Nice
Waiting for a series 3 85 Bronco Chassis with a 4 to 6inch lift kit...
Excelente calidad de video, muy buena musica.
Saludos desde Argentina.
What's the brand of torque wrench that lights up green when it hits the right number? That's one cool tool!
Snap on
Que hermosos fierros 😍
Хорошо.
one good brand powerbuilt and stanley
Apa judul lagu pertama broo?
I would love to spend my money with you guys. THIS IS AMAZING 👍👍👍👍
Very good.
So once a valve goes out on those struts you're back to lemon twists? I was going to ignore this whole thing if it didn't have reverse shackle leaf springs. Otherwise, God bless 120mph in it!
Good job 👍🏻
dear lord
please give me one of that
New subscribed from Somalia
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🇺🇦🙋
Awesome
que perrooooo arte por dios ❤❤
Would add air/electric lockers
RS4
مقطع رهيب
How much did this setup cost?
WOW, absolut perfekt🤩🤩🤩
Like this job😍
good
You got a chassis for an 89 Bronco...?
❤❤❤
Salaam dari Indonesia
Top
Are the rumors true? Did your guys used to work for Rolex Watches?
muito top, parabéns
Beautiful craftsmanship and engineering but.....not a whole lot of Bronco (other than the body?) left after all that.
I've had my '74 for 35yrs now, looks kinda beat but, it's an offroad beast.
2 things that I'm not too keen, on 6 lug hubs and after all that first rate stuff, no RCVs?
Would like to see the finished truck, though.
Nice work!
I agree with you 100% on the 6 lug and no RCVs
Work of art right there !
Price …..anyone ?…50k-60k ?….just guessing!
хочу такой конструктор!!!!
làm xe với công nghệ cao, cảm ơn anh đã chia sẽ video hay 😍😍😍
You can just call me for my address and send that right on over lmao. Absolutely stunning chassis that I have no use for but still want to hang it in my living room as art. And yes I am serious.
Awesome 🙆
Ini seperti pabrik mobil
สุด
Coba kecepatan video 1.5. 😅😅
👍👍👍 ok
ชอบมากครับ
goodboy 🙏🏻🙏🏻
прикольно👍
This chassis will never, *ever* see dirt, rocks or mud. (Why you would want to do that to a work of art is beyond me.)
Khung xe rất tốt
Andarilho
What would Mr. Henry Ford say?
I dreamt a very similar chasis after watching 👀🤔 your 750 h.p. survivors series pick up truck test/run through.
My vision was all G.M.C./CHEVY. A full 4X4 2500 series. Thank You.
When can we see this beautiful chasis with body make some noise ❔❔❔
Just ring my bell 🔔. 💚💙💜.
👍👌✌🏻 🙋♂️ 🇨🇦 👨🦽 😎.
P.S. 🔥 ☕ 🕒 😛.
_Starting_ at $40,000 ! ! !
Mantap bos
That is mint
Si tout' bricoleur pouvant construire nos véhicules comme ont voudrait mais danger les règles en sécurité sur la route ou pour autruies'mais encourageront les rêveurs sur les projets&réalisations?????
Ausgezeichnet 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
❤❤❤
Dope! 🔥🚀
Money money
😉😎
How much of the original Bronco is left ? Seems like the current fad is throwing most of the car away and reusing the body only . Awesome if you can afford it .
Quite possibly the badges with Ford and Bronco on them..
❤👍👌❤🌹
MERICA!!!! 💯🍻😝🎸🎶
high quality control👍
i jst pulled a 84 c10 out a field after 20yrs.... any help wuld b hot, front end specially. dont wanna use china shit from these parts houses....
will b slammed on ol school rallys,
t10 stingray,fresh. sb400 w461z, 12 bolt w 2:79... want it 4 drvn. front end is worn comletely out.
O único problema e que e Ford
Это не стабилизатор, а идиотизм!!! Тогда мост просто стывь на резинка и хорошо будет!!!
Они все на таких вроде ездиют?!)
@@dendenov743 я эт заметил!!! Тогда пусть просто рычаги приварят чтоб имитировать балку и будет им счастье!!😂😂😂😂
А то, то лом туда вставят, то трубу!!! Он должен чуть скручиваться о они стабилизатор лишают характеристик стабилизатора!!!)))))))
Сразу вспоминается М. Задорнов!))))
@@todaysuday5838 странно,,мне показалось торсион как торсион,,ничего хитрого
@@dendenov743 ды понятно что выглядит красиво!!! А работать о как будет вообще непонятно!!!
@@dendenov743 изгибание у стаба должно быть а не лом!!))))
P
Gotta give it all up for Tesla's and junk like that that lol
🤤🤤🤤🤤🤤
Almost only fans content