Це відео не доступне.
Перепрошуємо.

How to replace rear brake drum Toyota Yaris. Years 1998 to 2006

Поділитися
Вставка
  • Опубліковано 3 вер 2015
  • How to replace rear brake drum Toyota Yaris. Years 1998 to 2006

КОМЕНТАРІ • 37

  • @I_Am_Michael
    @I_Am_Michael 8 років тому

    now I know what those holes in the drum are for. when we did my son's brakes recently, we ended up hitting it numerous times to release the drum. if I had known about those holes, it would have been easier. thanks. when we put it back together, we coated that surface with a thin layer of anti seize grease so hopefully it does not do that again. thanks for sharing.

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  8 років тому

      Thanks for comment. :-)

    • @notoco1199
      @notoco1199 6 років тому +1

      michael adams if you hit drum with a hammer that may transfer force in to a bearing hub and shorten his life or damage. My mechanic did that couple months ago now replacing rear bearing hub after it only did 50k miles... Coincidence? :-)

  • @mphumzadlamini5480
    @mphumzadlamini5480 7 місяців тому

    Thanks for a tip, very useful

  • @Mapleleafpete
    @Mapleleafpete 8 років тому +1

    Thank you sir .

  • @_B_A
    @_B_A 6 років тому +1

    Hello there Peter Finn why is my toyota yaris brake on rear left skidding when driving and brakes feel weak

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  6 років тому +1

      MAybe Air in system?

    • @_B_A
      @_B_A 6 років тому

      Peter Finn oh thank you for help and reply. I will go garage tomorrow. Sunday all closed. Could it be the drum that is old and rusty

  • @patrickdurees3025
    @patrickdurees3025 8 років тому +2

    what are the size of the bolts you used to get drum off

    • @SurpriseMeJT
      @SurpriseMeJT 7 років тому +3

      m8 x 1.25 - use something like 40mm or so.

    • @jpnm81
      @jpnm81 5 років тому +2

      @@SurpriseMeJT thank you sir

  • @pascalchevalier6107
    @pascalchevalier6107 8 років тому

    If i remove my drum for paint it...... it is mandatory to adjust the brake like u did with the screwdriver?

  • @matt5802
    @matt5802 8 років тому

    thank you meerkat

  • @norosoros891
    @norosoros891 4 роки тому +1

    What size is the small bolt you used to take drum off

  • @grandmastershek
    @grandmastershek 8 років тому +2

    Nice job! Just a heads up:
    The "holes" are "teeth", and the breaks expand (bigger) and contract (smaller).

  • @royvincent9250
    @royvincent9250 7 років тому

    one small problem the echo dose not have a adjuster like this ill update when i find out how to adjust pads in and out

  • @asgharkhan1075
    @asgharkhan1075 Рік тому

    Dear Peter my this model car's one rear pad wear too early as compared to others, please must reply what could be the issue??

  • @mikmik4205
    @mikmik4205 3 роки тому

    What size of the bolt in the hub to loose it

  • @SwPiotrek
    @SwPiotrek Рік тому

    Thanks

  • @johnr.6029
    @johnr.6029 6 років тому

    Toyota Echo 2000 - 2005, which became Toyota Yaris in 2006 - present