2004-2007 Honda CBR 1000RR Knocking Noise Fix / Timing Chain Guide Replacement
Вставка
- Опубліковано 14 жов 2024
- If you are hearing a knocking noise coming from your top end and adjusting the timing chain tensioner is not helping here is the fix you might be looking for!
Timing gear 14mm bolt torque is 76 Ft/Lbs
wish you gave an example of the noise in action
About to dig into my clutch cover to see if this is the issue I’ve been having. Glad I found your video.
HELP ME PLS i have same issue where i can contact you? i want to show you video
This tip came in clutch when I replaced my timing chain on my 2012 blade. if you remove the guide as shown, as well as the cams you can change the chain in-frame.
hey guys great tip ... do you guys have any video teaching how to chage the timing chain and the tensioner ?
god damn it , i wish you had a video of the noise that it makes , ive posted a vid of the sound that my cbr sc59 makes !
Thanks
I don't recommend what I chose to do but I was having issues with my APE and the orange cam chain guard both causing the chain to be abnormally loose on the exhaust cam side and super tight on the intake causing a slow crank to no start condition as well as chain binding. I removed the chain guard completely and threw it in a dumpster fire. No more noise, no more binding, the tensioner works more efficiently now. Not sure what the LT results will be but f*** it some times ya gotta do what ya gotta do.
Do you mean chain guide?
@@belekas2729 correct
I actually had to go back in again and replace 2 bent valves as one valve just refused to seat and kept popping out. I cleaned each valve spotless and the ports made sure the problem valve was TDC for it to seat everything went back in beautifully. I really appreciate these videos and the ability to share our experiences in hopes that the next person will have more to okay with knowledge wise than the person before them.
@@mrjaybennett80 Thank's for your expierence info. But without the chain guide, how the chain tensioner adjust pressure to the chain? It is chain tensioner bolt directly touches the chain?
@@belekas2729 Where the APE bolts in that chain guide is there it is the guide on the opposite exhaust side that I removed so the tensioner is making contact with chain guide.
Can you advise how to properly set a manual cam chain tensioner (APE)? How do you know if it's too loose or too tight?
a different video i saw had a guy who loosened his all the way, ran the bike in neutral and slowly tightened the bolt until the sound when away
@@Oliver-jv5ww yes, but youre supposed to be able to view it to make sure its in spec, and thats why manual tensioners are not recommended
you can adjust these very easily by sound to lose is rattly rattle, to tight and it will make high pitched whirring noises, losen it untill it rattles and tighten it untill the rattle goes away that's it.
Very helpful info, thanks.
Is it possible to do this without removing the motor from the frame?
Any chance you would have a part number for the guide Im experiencing the exact same issue. Thanks
HELP ME PLS i have same issue where i can contact you? i want to show you video
Does it affect the performance of the motorcycle? cam chain problem
Is this typical on 954rrs as well
When it was knocking did the noise come out the exhaust as well?
HELP ME PLS i have same issue where i can contact you? i want to show you video
I have same bike with the stock cam chain tensioner 41,000 miles im getting a noise that sounds like timing chain when I hold a certain speed, but when I accelerate a bit it goes away. Any advice?
When you accelerate it will be under tension which is why it may go quiet. I noticed a chain noise on my bike above 3k rpm and below 5k so think it might be the tensioner. Will be checking it when have time
@@soldiers303 thanks
@@californiaprofile hey buddy did you figure it out? Mine made a horrendous sound like in the vid and I'm absolutely devastated that I did damage to it
@@jcodym13 not yet. But almost getting that tambourine sound
Same thing just recently. Did you figure it out? Since this dude couldn’t reply for shit 🤣🤣
HELP ME PLS i have same issue where i can contact you? i want to show you video
Revzilla and honda part site have oem parts with numbers and pictures
Noice!
Better if you changed guide timing chain and tensioner
Sounds like a bb buzzing around in there
Obvious disclaimer:
If you do not have an at least intermediate knowledge in vehicle engineering
do not
DO NOT strip your bike apart!