I hope this short video is useful for some of you. If you have questions, please just leave them in the comments and if you haven't yet, please subscribe to my channel. It's for free and you won't miss the next useful tutorial 😊
Very nice. You got straight to the point and quickly showed how it was done. See, kids, this is how a tutorial is done. ... Because life is too short. Great job. Thanks.
You saved me days of my life! I have a monogram creative console and I was setting it up as a new control surface. But as you mentioned, I set it up as a keyboard (even though it's not a keyboard) and it worked! Thanks again!
Thanks for this video. By sheer coincidence I'd decided this evening to move from using the Nanokontrol 2 from purely a mixing control in S1 5 to an expression control. I followed your steps et viola all is working. Brilliant.
Thank you Martin for your Tutorial on Korg - Studio one. You saved me from hours of diggin in midi drivers - somethig like that. The Korg NanoKontol Device that comes with Studio one is not working for me too. The way you described it with the Keybord instead do !!!! Thank you again .... Jörg
Thanks for your nice words. I don't use the Nanokontrol 2 to control my Korg Krome but to control various parameters in my DAW and/or Kontakt libraries and it just works fine.
Hi. I have a IconQcon Pro that works well with Studio One; but i would like to make the footswitch to be used to start recxording; i don´t find a way to assign the footswitch. I´ll apeciate if you can help. I am using the Mackie control protocol.
hi Martin. Did you ever try or succeed to manage your Krome banks & programs with such a MIDI controler ? with Nanokontrol2 or another ? I’d like to find a way to switch faster from banks and programs otherway than with the touch screen menus. Thank you if you can help me.
I have spent a few hours trying to figure out why the S1 nanoKontrol 1 and 2 pre-made setup didn't work at all... Fortunately I stumbled across your video and I was able to make all the faders work as expected. Just a question, if I want to map all the knobs on the nanoKontrol as well, I assume that I need to do it by adding them manually as you demonstrated for the Transport controls towards the end of the video. In a different DAW my nanoKontrol worked without any issues, S1 is not recognizing it when using the pre-made settings which is not good at all. Thanks and best, MaxT
I don't use Studio One anymore since at least two years but if I remember well then yes, you have to assign the knobs manually, which makes sense anyhow: at least you assign them to the functions you want
Hi Martin, Thank you sooooooooo very much for the easy strength forward tutorial on the Korg controller installation. As soon as I get home I'm going to try it!!! One question has to do with the "vibrato" function in the "Kontack" player samples. You use Volume (Dynamic), Expression and Modulation. There are some samples that offer vibrato. Do yours that at all? Bets regards, Art Phinney. Composer/Song-Writer/Engineer
Dear Art, thanks for your nice words. Of course it does, I use vibrato too in some libraries. Just right click on the vibrato knob within the Kontakt library and choose learn midi cc, then move the fader that you want to assign and there you go
hii ty for the vid. im still having an issue. im using ableton live. everything is connected, ive assigned the cc numbers on my faders through the korg kontrol editor. when i try to record the faders are not working with the cc. any assistance would be great
Hi Martin, thanks for explaining this. However, even if this works for me right after I set it up and go in Cubase and faders work great, it seems that after some time the settings in Korg Kontrol editor get reset by itself as if I never had set them up, which is weird because i saved it exactly as you show in the video and it works fine at the beginning.. Do you know maybe why does this happen? I would be very happy if you can help..
@@MartinHeidenreichMusic my question is not related to Cubase at all. I am talking about Korg Kontrol Editor that you showed in your video. I also clicked on write scene data and it worked but after some time when I open the same Editor the settings are gone, it's again everything like before setting it up which is weird because clicking on write scene data should save it for always, I don't understand why it gets reset after some time... Thanks for finding time to answer back :)
Hey Clive, I'm not really sure if I understand your question. You can assign any Midi CC value (Expression, Modulation, Volume, Panning...) and every knob or fader of Kontakt instruments to those faders and knobs of the Korg Nanokontrol. I hope that helps
@@CliveWrightMusic Yes, you can set it up that way too, to control the audio faders. My video was about Midi CC. Please don't ask me how to do it as it's app. 2 years that I switched over to Logic Pro
Hi and thanks for gr8 tutorial. I have a nano kontrol studio with a bigger round knob that i want to use to move the playhead around 1 bar per click. Instead of having to use the mouse when you're recording and something goes wrong and you need to move the playhead back a few bars. How do i do that?
Thank you for great solution.I was like a crazy about solution last 3 days.But still i have problems.Also i want to control daw faders which track i choose.For example i want control any daw channel fader on nanokontrol fader 8.So i mean control fader 8 ,when i choose any channel by mouse.Also i want control pan as same style.Is there any solution about that ?
Great thanks!! This is EXACTLY what I've been looking for!! Can you also a setup video for Cakewalk by Bandlab?? I'm pulling out what little hair I have left trying to set this up in my DAW!
Out of the box, NanoKintrol2 has SONAR compatibility. Since Bandlab has kept the whole SONAR core, I'm pretty sure that the settings should still work. I still keep Cakewalk by Bandlab on my system (I also have the last updated version of DONAR Platinum), because for about 10 years SONAR was my DAW of choice. This should work: Unplug USB to Nano. Hold down "Set Marker" and "Record" buttons on Nano. Go into Cakewalk's MIDI Device window and select NanoKontrol for both input and output. Then open Cakewalk's "Controllers/Surfaces" window and selecgt Mackie Control for the control surface. Finally select the Nano for the in/out ports to be used for Mackie control. That should get you an implementation where all the buttons, faders, and knobs on the Nano fo what they say on the printing on the Nano.
oops... the second step should have said "Hold down "Set Marker" and "Record" buttons on Nano while you replug the USB cable into the Nano." Sorry about that
Can you use a midi controller that has faders to control the individual track volumes and the master fader? What about midi velocity on a midi track? Thanks
Never heard that velocity could be controlled with faders, that's normally done with your keyboard (or in the Pianorolle). The individual tracks instead can be routed to the various faders but sorry, it'S over a year that I switched to Logic, don't remember how that was done in Studio One
Hello. I thought I posed this question the other day but I didn't see my post. I was hoping you could help me solve an issue I'm having getting the nanoKONTROL 2 to control my tracks in studio one individually instead of simultaneously. I want the sliders to be be able to control the volume of each track by itself. Right now, each slider controls all of the tracks volume at the same time, can't figure out where I'm going wrong. Hope you can point me in the right direction, thanks in advance.
Hi David, so sorry, it's over a year now that I don't open Studio One, switched completely over to Logic. Don't remember anything so I guess I won't be able to help
Hi. Good video Martin. I want to buy one of these to use on Windows 7. I can't find any information if it will work though. Do you know please? Also, does it only have one bank of 8 faders?
Great video Martin! But I still couldn't get mine to work. What Mac OS are you running this on? I just got the nanoK2 and have been trying to connect it as well to Studio1.5. Tried your method but it still doesn't connect to KONTAKT. I'm still on Catalina OS.
Dear Hasan, this method worked for me on Windows 10 and the same on Catalina. Now I'm on Big Sur and tried it. It still does work. What exactely is not working? CC Control or the Transport Buttons?
Good Job.Thanks ! But i have a problem with REW and FF button.when i press and release button, studio one 5 does not stop to rewind or FF...and i must press stop button.do you have this Pb ?
I have a NanoKontrol2 by Korg. I love the controller, but I haven't figured out one thing (to be honest, I'm not good at assigning CC values, etc., I prefer using it with DAW integrationg straight out of the box). I am an Ableton Live user, and NK2 works fine with the DAW control except for one thing. By default in Ableton's profile faders control track volumes. However, they don't work in the soft takeover / pickup mode. I mean if I use the first fader on track 1, and then use it on track 9, whenever I get back to track 1 and touch the fader, I'll get a volume jump. Does anyone know the way to fix it and still keep native support for Ableton? Cause the rest of the functions are perfect! Thank you and have a good day / night!!! ps. I think thouse value jumps occur in other DAWs as well, not just Ableton.
Yes, that's the same behaviour in Logic. As the start to record midi data newly from where they are at that moment. Need to adjust that manually, at least from what I know.
@@MartinHeidenreichMusic manual mapping isn't the best solution. During creative sessions you may add and delete tracks, and manual mapping is way too straight forward. If you map fader 1 to track 1, and then for some reason delete it (and track 2 becomes the new track 1), your fader 1 won't control anything any longer. And your new track 1 will be controlled by fader 2, etc. So it's not a kind of "intelligent" mapping as compared to native support. I heard people used some CC wizardy to change that and I'm looking for those who know how to fix it. There were also ISOTONIK scripts for KNK2 where this bug was fixed, I wanted to buy it actually, but it doesn't work in Ableton 11, and has some other drawbacks, too.
Sometimes, the nanokontrol just doesn't work at all. Been a few weeks since using Studio One and it's decided to stop reading input, but it detects the nanokontrol.
sorry, it's nearly one year that I don't use Studio One anymore, switched completely to Logic. I think to remember it has to do with the separation in Studio One between Instrument and Control Surface. Just needed to add one of them again, but I repeat, it's already some time ago.
@@MartinHeidenreichMusic Absolutely it did help a lot. Thanks ! By the way I am using S1 5.5.1 and it seems that the commands assigned to the buttons/faders of my nanoKontrol are not saved when I reload a project, start another one or open S1. Buttons/Faders are still there but commands are lost. Have you noticed this bug or I am missing something ?
I hope this short video is useful for some of you. If you have questions, please just leave them in the comments and if you haven't yet, please subscribe to my channel. It's for free and you won't miss the next useful tutorial 😊
Very nice. You got straight to the point and quickly showed how it was done. See, kids, this is how a tutorial is done. ... Because life is too short. Great job. Thanks.
Thank you so much Scott. I'm happy if it helped you
@@MartinHeidenreichMusic I did. Ive never grasped a DAW tutorial as fast as this. Maybe it is your vibe. Thank you.
This is exactly what I needed!! Adding New Keyboard made all the difference. Thank you so much!!
Your welcome, glad if my tutorial helped. Enjoy your AMG 😎
You saved me days of my life! I have a monogram creative console and I was setting it up as a new control surface. But as you mentioned, I set it up as a keyboard (even though it's not a keyboard) and it worked! Thanks again!
Thanks Eric, happy if I could help you. What else can I say? Like and subscribe 😊
Thanks for this video. By sheer coincidence I'd decided this evening to move from using the Nanokontrol 2 from purely a mixing control in S1 5 to an expression control. I followed your steps et viola all is working. Brilliant.
Hi Tim, thanks for your nice words. I'm happy it helped. More videos on the way :)
Just bought nano today. Should be with me tomorrow. Thank you for saving me lots of time. 👍😄
Hi Paul, you're welcome! More videos on the way :)
Short, simple & sweet! Thanks!!
Thank you so much
Thank you Martin for your Tutorial on Korg - Studio one. You saved me from hours of diggin in midi drivers - somethig like that. The Korg NanoKontol Device that comes with Studio one is not working for me too.
The way you described it with the Keybord instead do !!!! Thank you again .... Jörg
Gern geschehen :) Always happy to hear that those tutorials are helpful
This is awesome, Martin. Thank you for this short and to-the-point post.
Thanks for your kind words. More videos on the way :)
Thank you very much. You’re a good teacher. Very useful.
Thank you so much. I might add one soon showing how I use the various buttons to open and close windows in my DAW
You saved my life! Thank you!!!
Thank you so much! Enjoy your life 😉
Thank you so much...very clear and of great help.
Always happy to hear that my videos help. Thanks for your nice words and enjoy the NanoKontrol
Thanks! Concise and competent! I will order a Nanokontrol2 soon!
You won't regret it, this tiny thing is really useful
Thank you! It finally works :D:D:D
I'm happy if that video helped :)
This was really helpful! Thank you very much
Thank you Christian. I'm happy if I could help
thank you for your excellent and useful tutorial. Did you succeed controling your Korg Krome with Nanokontrol2 ?
thank you for your help.
Thanks for your nice words. I don't use the Nanokontrol 2 to control my Korg Krome but to control various parameters in my DAW and/or Kontakt libraries and it just works fine.
Hi, thanks a lot for the tutorial. Is there any way to make the controller red lights work? I mean to make the "solo" button presses stay lit, etc.
You welcome, I'm happy if that tutorial helped. Sorry, but I didn't find a way to keep those lights on, they only flash if pressed
Hi. I have a IconQcon Pro that works well with Studio One; but i would like to make the footswitch to be used to start recxording; i don´t find a way to assign the footswitch. I´ll apeciate if you can help. I am using the Mackie control protocol.
Sorry, it's probably two years that I didn't open up Studio One, I switched completely to Logic....don't have the answers
hi Martin. Did you ever try or succeed to manage your Krome banks & programs with such a MIDI controler ? with Nanokontrol2 or another ? I’d like to find a way to switch faster from banks and programs otherway than with the touch screen menus. Thank you if you can help me.
sorry no, i never tried that as I bought it for the sole reason to record my Midi CC data
I have spent a few hours trying to figure out why the S1 nanoKontrol 1 and 2 pre-made setup didn't work at all... Fortunately I stumbled across your video and I was able to make all the faders work as expected. Just a question, if I want to map all the knobs on the nanoKontrol as well, I assume that I need to do it by adding them manually as you demonstrated for the Transport controls towards the end of the video. In a different DAW my nanoKontrol worked without any issues, S1 is not recognizing it when using the pre-made settings which is not good at all. Thanks and best, MaxT
I don't use Studio One anymore since at least two years but if I remember well then yes, you have to assign the knobs manually, which makes sense anyhow: at least you assign them to the functions you want
@@MartinHeidenreichMusic Thanks for your kind reply!
Thanks so much. Very useful.
I'm happy if I could help you with this
Hi Martin, Thank you sooooooooo very much for the easy strength forward tutorial on the Korg controller installation. As soon as I get home I'm going to try it!!! One question has to do with the "vibrato" function in the "Kontack" player samples. You use Volume (Dynamic), Expression and Modulation. There are some samples that offer vibrato. Do yours that at all? Bets regards, Art Phinney. Composer/Song-Writer/Engineer
Dear Art, thanks for your nice words. Of course it does, I use vibrato too in some libraries. Just right click on the vibrato knob within the Kontakt library and choose learn midi cc, then move the fader that you want to assign and there you go
THANK YOU!!!!!
Your welcome
hii ty for the vid. im still having an issue. im using ableton live. everything is connected, ive assigned the cc numbers on my faders through the korg kontrol editor. when i try to record the faders are not working with the cc. any assistance would be great
Sorry, I have no clue about Ableton. Hope you find a tutorial for your DAW
Puedes hacer un video sobre como configurar korg nanokontrol 2 en kontakt
Hi Cristian, what precisely do you mean? How to assign various controls within an VST to the knobs and faders?
Hi Martin, thanks for explaining this. However, even if this works for me right after I set it up and go in Cubase and faders work great, it seems that after some time the settings in Korg Kontrol editor get reset by itself as if I never had set them up, which is weird because i saved it exactly as you show in the video and it works fine at the beginning.. Do you know maybe why does this happen? I would be very happy if you can help..
Happy that it helps, but sorry, I don't know Cubase at all
@@MartinHeidenreichMusic my question is not related to Cubase at all. I am talking about Korg Kontrol Editor that you showed in your video. I also clicked on write scene data and it worked but after some time when I open the same Editor the settings are gone, it's again everything like before setting it up which is weird because clicking on write scene data should save it for always, I don't understand why it gets reset after some time... Thanks for finding time to answer back :)
Great video. Would you know how to set it up in Cubase or Cakewalk?
Thanks if advance if you know.
Sorry no, I only use Logic these days and once in a while Studio One
do the faders on the Korg move the faders on Studio One or are they just transmitting synth midi volumes?
Hey Clive, I'm not really sure if I understand your question. You can assign any Midi CC value (Expression, Modulation, Volume, Panning...) and every knob or fader of Kontakt instruments to those faders and knobs of the Korg Nanokontrol. I hope that helps
@@MartinHeidenreichMusic hi my question is do the Korg faders movement correspond to the Studio one audio faders? If yes does it require setup ?
@@CliveWrightMusic Yes, you can set it up that way too, to control the audio faders. My video was about Midi CC. Please don't ask me how to do it as it's app. 2 years that I switched over to Logic Pro
Hi and thanks for gr8 tutorial. I have a nano kontrol studio with a bigger round knob that i want to use to move the playhead around 1 bar per click. Instead of having to use the mouse when you're recording and something goes wrong and you need to move the playhead back a few bars. How do i do that?
Sorry Rasmus, I don't have the Nano Control Studio, so I can't try to find a solution
Thanks a lot!!!
You're welcome! The Nanokontrol once working is so useful
Thank you for great solution.I was like a crazy about solution last 3 days.But still i have problems.Also i want to control daw faders which track i choose.For example i want control any daw channel fader on nanokontrol fader 8.So i mean control fader 8 ,when i choose any channel by mouse.Also i want control pan as same style.Is there any solution about that ?
Sorry, I don't know as for me the CC control was the main focus. But Presonus has a great support. I'm sure they can help quick with this
@@MartinHeidenreichMusic if honest Logic more flexible than S1 about midi mapping,thanks for reply,have a good work
@@gokmendoganaymuzik2361 you too, enjoy music
Great thanks!! This is EXACTLY what I've been looking for!! Can you also a setup video for Cakewalk by Bandlab?? I'm pulling out what little hair I have left trying to set this up in my DAW!
Hi Jeff, sorry but I have no idea how Cakewalk works. I'm working 95% in Logic Pro and use Studio One once in a while.
Out of the box, NanoKintrol2 has SONAR compatibility. Since Bandlab has kept the whole SONAR core, I'm pretty sure that the settings should still work. I still keep Cakewalk by Bandlab on my system (I also have the last updated version of DONAR Platinum), because for about 10 years SONAR was my DAW of choice. This should work: Unplug USB to Nano. Hold down "Set Marker" and "Record" buttons on Nano. Go into Cakewalk's MIDI Device window and select NanoKontrol for both input and output. Then open Cakewalk's "Controllers/Surfaces" window and selecgt Mackie Control for the control surface. Finally select the Nano for the in/out ports to be used for Mackie control. That should get you an implementation where all the buttons, faders, and knobs on the Nano fo what they say on the printing on the Nano.
oops... the second step should have said "Hold down "Set Marker" and "Record" buttons on Nano while you replug the USB cable into the Nano." Sorry about that
Can you use a midi controller that has faders to control the individual track volumes and the master fader? What about midi velocity on a midi track? Thanks
Never heard that velocity could be controlled with faders, that's normally done with your keyboard (or in the Pianorolle). The individual tracks instead can be routed to the various faders but sorry, it'S over a year that I switched to Logic, don't remember how that was done in Studio One
Hello. How do I configure the other channels from 09 to 16, for example? Thank you. Edson Walter, Canoas RS, Brazil.
sorry, i don't use the Nanokontrol to control the volume of my tracks, only for MidiCC. Can't help you here
Hi Martin, geht das auch in Windows mit Studio One und dem Korg NanoControl???
Das geht ganz genau so. Bevor ich wieder auf dem Mac und bei Logic gelandet bin habe ich mit Studio One auf einem PC gearbeitet
Hello. I thought I posed this question the other day but I didn't see my post. I was hoping you could help me solve an issue I'm having getting the nanoKONTROL 2 to control my tracks in studio one individually instead of simultaneously. I want the sliders to be be able to control the volume of each track by itself. Right now, each slider controls all of the tracks volume at the same time, can't figure out where I'm going wrong. Hope you can point me in the right direction, thanks in advance.
Hi David, so sorry, it's over a year now that I don't open Studio One, switched completely over to Logic. Don't remember anything so I guess I won't be able to help
@@MartinHeidenreichMusic Thanks for the update.
Hi. Good video Martin. I want to buy one of these to use on Windows 7. I can't find any information if it will work though. Do you know please? Also, does it only have one bank of 8 faders?
Hi James, yes 8 faders. Mine worked great on windows 10 with studio one before I got my Mac. So it should work with windows 7 too
@@MartinHeidenreichMusic Thanks for your reply..
@@jamesr3322 you're welcome
Hi Martin, thanks for the video, does it come with the usb cable?
Thank you and yes it does 😊
Great video Martin! But I still couldn't get mine to work. What Mac OS are you running this on? I just got the nanoK2 and have been trying to connect it as well to Studio1.5. Tried your method but it still doesn't connect to KONTAKT. I'm still on Catalina OS.
Dear Hasan, this method worked for me on Windows 10 and the same on Catalina. Now I'm on Big Sur and tried it. It still does work. What exactely is not working? CC Control or the Transport Buttons?
@@MartinHeidenreichMusic CC works on faders... but Transport buttons doesn't respond correctly. IS there any way to share the template you made?
@@HasanIsmailStudio Dear Hasan,
I will see if I can export the template and then let you know where to download it.
@@MartinHeidenreichMusic That would be awesome if you can.
Good Job.Thanks ! But i have a problem with REW and FF button.when i press and release button, studio one 5 does not stop to rewind or FF...and i must press stop button.do you have this Pb ?
i've tried to change the "button behavior" to toggle in korgKontrol editor but nothing change.
Sorry, I'm mainly on logic now, can't about that
I still can't get mine to work and have done everything you've described. Can someone help?
Hard to say from your description. What precisly doesn't work? Sure it's not defect?
Subbed cheers
Thank you Wesley
Grazie
un piacere. sono sempre felice quando sento che i miei video sono stati utili per qualcuno
@@MartinHeidenreichMusic il video è stato fondamentale per mappare e settare correttamente il mio nanokontrol2 con Studio one 5.5
A small question. Do you have an idea how to use the Nanokontrol 2 with Spotify to use the play/pause button to play and pause a song?
Sorry, no idea. Nanokontrol sends midi data, maybe there is some tool that can interpret them for spotify
I have a NanoKontrol2 by Korg. I love the controller, but I haven't figured out one thing (to be honest, I'm not good at assigning CC values, etc., I prefer using it with DAW integrationg straight out of the box). I am an Ableton Live user, and NK2 works fine with the DAW control except for one thing. By default in Ableton's profile faders control track volumes. However, they don't work in the soft takeover / pickup mode. I mean if I use the first fader on track 1, and then use it on track 9, whenever I get back to track 1 and touch the fader, I'll get a volume jump. Does anyone know the way to fix it and still keep native support for Ableton? Cause the rest of the functions are perfect! Thank you and have a good day / night!!! ps. I think thouse value jumps occur in other DAWs as well, not just Ableton.
Yes, that's the same behaviour in Logic. As the start to record midi data newly from where they are at that moment. Need to adjust that manually, at least from what I know.
@@MartinHeidenreichMusic manual mapping isn't the best solution. During creative sessions you may add and delete tracks, and manual mapping is way too straight forward. If you map fader 1 to track 1, and then for some reason delete it (and track 2 becomes the new track 1), your fader 1 won't control anything any longer. And your new track 1 will be controlled by fader 2, etc. So it's not a kind of "intelligent" mapping as compared to native support. I heard people used some CC wizardy to change that and I'm looking for those who know how to fix it. There were also ISOTONIK scripts for KNK2 where this bug was fixed, I wanted to buy it actually, but it doesn't work in Ableton 11, and has some other drawbacks, too.
hI
I tried Connection on windows But the Korg editor is not showing the device connected .. Cant move ahead.
please help
Sorry, I'm afraid I can't help you. I'm not using Windows and/or Studio One since years. I hope you find the information somewhere else
With version of Mac did you do this with?
It was Catalina, don't remember which version I was on when I did the Video. By now I use Big Sur and it still works great
@@MartinHeidenreichMusic Appreciate it, I just got the m1 mac mini, probably converting from my windows machine if I like it
How can i setup like this in cubase 10.5 ., my play ff fw stop button it doesn’t work in cc mode.
Hi Stahlt, sorry, I have no idea. I use only Logic Pro and once in a while Studio One. Ask someone who has some videos about Cubase I suggest
Sometimes, the nanokontrol just doesn't work at all. Been a few weeks since using Studio One and it's decided to stop reading input, but it detects the nanokontrol.
sorry, it's nearly one year that I don't use Studio One anymore, switched completely to Logic. I think to remember it has to do with the separation in Studio One between Instrument and Control Surface. Just needed to add one of them again, but I repeat, it's already some time ago.
How do I find the same video for Logic?
Hi Ken. Here ua-cam.com/video/vY5Sdza_ec0/v-deo.html and here ua-cam.com/video/RnGTlJjFlFs/v-deo.html and don't forget to subscribe ;-)
Is this a mixer
Depends on how you use it. Can be mixer or Midi CC Controller. I use it as a Midi CC Controller. What do you want to use it for?
@@MartinHeidenreichMusic a mixer I wanna record that’s why
Thanks a lot !
You're welcome Cyril. Hope this video helped a little to get the NanoKontrol working
@@MartinHeidenreichMusic Absolutely it did help a lot. Thanks ! By the way I am using S1 5.5.1 and it seems that the commands assigned to the buttons/faders of my nanoKontrol are not saved when I reload a project, start another one or open S1. Buttons/Faders are still there but commands are lost. Have you noticed this bug or I am missing something ?
@@UDun8 sorry, don't know. I'm on Logic since one year now
@@MartinHeidenreichMusic Sure, I understand :)