Honda Talon clutch replacement, how to replace clutches, clutch baskets

Поділитися
Вставка
  • Опубліковано 21 чер 2023
  • Step by step, how to video on the honda talon clutch basket replacement process.
    Clutch relearn video link.
    • Honda Talon/Pioneer Cl...
  • Авто та транспорт

КОМЕНТАРІ • 32

  • @muddingmiller
    @muddingmiller 8 місяців тому +1

    Thanks for the video. Got my 1000x4 apart basically same thing. Parts ordered.. You saved me a fortune not bringing it to dealer.

    • @gravesru
      @gravesru  7 місяців тому

      Awesome and thank you for watching!!!!

  • @mrgbluecar
    @mrgbluecar Рік тому +2

    Excellent video! Thanks Russ.

  • @gravesru
    @gravesru  Рік тому +2

    Thanks for watching!

  • @Saileahgaz
    @Saileahgaz 6 місяців тому +1

    @ 8:15 - For others researching the issue you describe: I had a similar issue with stalling but found that it was a faulty IAC Valve (Idle Air Control). My Talon R would idle just fine, but would stall upon acceleration. Just putting this out there for viewers consideration.

    • @gravesru
      @gravesru  6 місяців тому

      Good info, thanks.

  • @subsonic9545
    @subsonic9545 Рік тому +1

    Thank you for making this video. I now feel it’s possible to complete at home.

    • @gravesru
      @gravesru  Рік тому +2

      Thanks for watching! Much better than waiting months for the dealer!

  • @richardh6576
    @richardh6576 3 місяці тому

    Thx this helped alot...

    • @gravesru
      @gravesru  3 місяці тому

      Glad to hear!!!!

  • @BetterDegree7
    @BetterDegree7 2 місяці тому

    Do not pry the axle out of the diff. Plunge and pull on the shaft. You can crack the diff housing by prying on it

    • @gravesru
      @gravesru  2 місяці тому

      No issues and I’ve done it that way 50 times or more. It’s only an issue if people don’t grease the splines and they’re stuck in the diff.

  • @johnlayton50
    @johnlayton50 2 місяці тому

    When installing do the primary drive gear teeth slide all the way into the other gear? Like completely flush? I have about an 1/8in difference. I’ve tried about 15 times. Unless that front guide gear keeps falling out of one clutch plate .

    • @gravesru
      @gravesru  2 місяці тому

      Those teeth do not line up flush!

  • @aw9680
    @aw9680 Рік тому +1

    Were you getting any noise along with your other symptoms? Was there a part update on that damper spring assembly?

    • @gravesru
      @gravesru  Рік тому

      No noise, just stalling when starting off at 0 mph about 50% of the time.

    • @aw9680
      @aw9680 Рік тому

      @@gravesru mine clatters from behind me. That's the only part I can't get my hands on. Gonna have to pull that cover off and inspect the spring retainer.

    • @gravesru
      @gravesru  Рік тому

      @@aw9680 hopefully you find the problem!

  • @user-ln2ci6rz2m
    @user-ln2ci6rz2m 7 місяців тому +1

    What do you torque the valve cover and the clutch cover to

    • @gravesru
      @gravesru  7 місяців тому

      I just snugged them up with a 1/4 ratchet, I can look up the exact torque specs

  • @mikewagers8610
    @mikewagers8610 9 місяців тому +1

    so in a previous video you said you was pulling trucks for miles, you think that's what made the clutch malfunction?

    • @gravesru
      @gravesru  9 місяців тому

      No, that was in my 2 seater, this video is from my 4 seater. The clutch was baskets were still good, just the primary drive was broken. I’ve never heard of anyone breaking a primary drive before.

  • @drewdalton3533
    @drewdalton3533 9 місяців тому +1

    After replacing my clutch my talon will not do anything when put into gear. Any advice?

    • @gravesru
      @gravesru  9 місяців тому

      Did you open up clutch cover and do anything in there? All electrical connections connected like the shift motor?

  • @CraigR2832
    @CraigR2832 8 місяців тому +1

    Can you do this without pulling rear diff?

    • @gravesru
      @gravesru  8 місяців тому +1

      No, I don’t believe so, plus it’s super easy to pull the diff out

  • @sinofpride8391
    @sinofpride8391 9 місяців тому

    How much HP does the jr kit add to stock talon?

    • @gravesru
      @gravesru  9 місяців тому +2

      I have a separate video with the Jr Dyno results. You will get 120-125whp.

  • @TheIrving32
    @TheIrving32 Місяць тому

    How were you able to pull the basket out mine is stuck in there

    • @gravesru
      @gravesru  Місяць тому

      Twist and gently pull. It’s probably stuck on one of the seal rings

    • @TheIrving32
      @TheIrving32 Місяць тому

      OK, I'll give it another try.I wasn't sure if I was going to have to take off more stuff just to get it out