Replacing the Clutch on a Suzuki Samurai
Вставка
- Опубліковано 15 лют 2018
- In this video I'll be showing ya'll how to replace the clutch on a Suzuki Samurai. As well as showing you some upgrades that can be done while you've got the transmission out of the truck.
Dr. Z's HD Transmission Mount:
www.drzfab.com/product/samurai...
Petroworks High Performance Clutch:
www.petroworks.com/high-perfom...
Video that explains proper driveshaft angles and phasing:
• Driveshaft Angle and P...
If you would like to help support the channel check out ELK Motorsports Patreon Page:
/ elkmotorsports
Equipment I use to make videos with:
Panasonic G7: amzn.to/2qUrc7K
SD Card: amzn.to/2qUT8sd
SunPak Tripos: amzn.to/2r0cUTd
Rode Video Micro: amzn.to/2HNaqkC
48" Camera Slider: amzn.to/2HFGTt9
Welcome to ELK Motorsports. My name is Trey Koepsel and on this channel the content will be mainly centered around my Suzuki Samurai, La Otra. There are also some other up coming builds, including a full on Suzuki Samurai Truck Cab Buggy build, as well as a Toyota Land Cruiser build. The main focus of this channel is to entertain, educate ( me as much as you), and most importantly have fun. If you enjoy fabrication, automotive modifications, and being entertained, then SUBSCRIBE to the channel to stay up to date on what I've got going on in the shop. So with that all said welcome to the channel.
/ elkmotorsports1
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, ELK Motorsports receive a small commission at no extra charge to you. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
Channel Sponsors:
Zuks Offroad
Camp Verde, AZ 86322
(928) 567-3061
ZuksOffroad.com
/ zorproducts
Pro Stickers
5488 S Padre Island Dr
Corpus Christi, TX 78411
(361) 452-2840
/ emblemoverlays - Авто та транспорт
Great video. After watching yours I wish I had done the clutch myself. You are a natural teacher. Easy to understand, great pace, clear and intelligible video. Thanks!
Daniel Logue thank you so much for the complement, I really try to make the videos easy to follow, so that y'all will want to try this stuff on y'alls samurais.
Great information provided in a clear, easy to understand way. No one would ever call me mechanically inclined, but following along with you I was able to put in my own clutch. Unbelievable. Haha
Thank you for this video. I have watched this about 10 times. I have just completed installing the clutch in my 1987 Samurai. I am about to slip in the rebuilt transmission. Which I rebuilt by watching a video as well.
I've watched all of your videos now and this one is outstanding. When I saw your stock rear transmission mount, I saw that it looked exactly like mine and mine is at just a couple thousand miles from new. I took video of my intermediate shaft and back of the transmission with the stock mount while driving down the road (stuck a gopro under the Sami) and the whole transmission and shaft is moving side to side and up/down in an elliptical path when accelerating. Crazy. The stock mount allows for a lot of movement. I was so happy to see your Dr. Z's HD Transmission Mount. I am definitely going to buy one of these and fix my rear transmission/shaft movement issue. I now also feel confident that I can drop the transmission and do a clutch job if needed. This kind of video give me the confidence to go for it and do it myself. Thx!
That's awesome man, that's what I wanted to do with the videos. Don't let any job discourage you from getting in there!
GREAT VIDEO AND PLAY BY PLAY. To take yours out just to show and help someone else is pretty cool . Just a helpful tip I've used with those spacer plates. I take a wire about 6 inches long,any gauge(14,16,18) and strip it. Then take a strand or 2 and use them like a twist tie to hold the plate in place. The bolts still have lots of room to fit and you can remove them before you tighten the transmission down. Thanks for taking the time to share
I’m running the same clutch on my 1.6 16v swapped Samurai, makes a huge difference and doesn’t slip at all when you give it the beans
Great video as always. I have done that job too. Since changing mine when I first cranking it from cold start in neutral and let off the clutch you can feel it grab a little. But after that’s it’s normal.
You are the man!!! Thanks for the lesson brother was able to do everything myself. Saved me a ton of money from paying the shop. Thankyou for your help. Subscriber for Life!!!!!🤙🏿🍺
Your videos have been tremendously helpful I can’t thank you enough! Please keep them common!
Your very welcome, and I will!
Very nice Video again. Hope you will get a lot more support soon. The best Samurai channel in www.
Off Driver thank you so much for the support, yeah I try to bring good content to y'all. And the channel is seeing steady growth because of it.
Best video on the topic I've seen. Well done showing every step
great video man helped me a lot with doing my clutch for the first time
So glad I found this samurai channel! Subscribed
Thank you for the support, and I'm glad you enjoy
Thanks for the great video, and taking the time to explain your steps. Keep up the good work.
Like how ya wrapped your exhaust, I did the same thing on my Samurai & 7.3 turbo diesel. Make a lot more temp difference than people would think.
yes it does, I had wrapped the turbo housing too, but its a little inconvenient for maintenance purposes.
Excellent video!
It's almost a complete tutorial!
Very, very, helpful!
Thanks a lot!
Excellent, I have to do my 1987 soon. I will keep this for when I start...….thanks
Good video. I am putting my rebuilt trany in soon with a new clutch. Thanx.
Definitely the best samurai channel on UA-cam. Keep it up, love the videos!
Thank you from Costa Rica, I was able to change my clush in my Samurai by myself.
Esteban Jimenez Soto, I'm glad the video was helpful.
your samu is so clean I'm going to clean mine now
Thanks for another great video.
Thank you for your support.
Dude that was awesome i have a 1984 Suzuki Jimny sj410
Great Video mate with a bit of reality of making mistakes in it this is a welcome change from most
Yeah, I didn't see how making it look perfect and easy would help anyone who is interested in taking a crack at it.
nice video and very lovely suzuki !!
Thanks man!!! Great video!!
This is an awesome Channel love it keep the videos coming I've owned my samurai since 92 I put 4 engines in it their most recent I just got it running yesterday took her for the test drive I put a Volkswagen 1.9 turbo diesel in it we'll see how it does one request can you show how to adjust the clutch to make the adjustments on it thank you
Vance Ford you got it! And that's awesome. I'd love to do a diesel swap
great video!! thanks!!
YES - a new technical Video. I`m impressed by your installed Stuff. For me (i love it simple and largely stock to keep it durable and easy to fix by bushcraft-mechanic`s...) too much - but i`m excited by Rig`s there`s owner-build/custumized. You have a very good Rig in a top shape - very good! Need more :-)
Alfred Staude glad you enjoyed the video, these types of videos take the longest to make but I feel that they are the ones that are wanted by the community more. I got all the parts for the transfer case from the powder coaters, but have been working in a turn around and haven't had time to film anything.
I don`t want to pressure you! I`m enjoy all you`re Video`s; the technical are more interested for me but i respect and honour all the other too. I now how many work it is to do things right - and you`re also filmed that.
That`s very fine. You`re description are also very good and help 100%.
Once again: many Thank`s for you`re Video`s and the work behind this (by the way you have a Family/Job and so on) !
I enjoy making them, so it's no pressure at all
Thank you Brother learn a lot from you
Very thorough with great videoing, clint eastwood couldn't have done any better
About to pull the trans for a rebuild, I was really worried about time. 87 tintop is my dd and no work, no pay. This video really calms my anxiety.
If you come to Broken Bow, send a message. K Ridge and the Ouachita NF await.
excellent explanation...
Great video !!!!!
Thank you so much for doing this video man keep up the good work man
Your welcome
Hey did you use any type of lubes when you took the drive shaft of for the bolts to come off?
Juny Beltran I didn't, but I had put antiseize on the guards from the last time, because of there exposure to the elements. If you need to, spray some penitrating spray on the bolts.
Hey man what's the name of the video for the drive shaft to get them rigth?
Drive shafts and phasing
That Sami is loved.
Yes, Yes she is.
Just a Tip,,next time you install your gearbox ,,put it in gear so you can rotate the input shaft ,by turning the rear flange,,secondly I dont recommend putting grease on the outside of the pilot bearing as this may cause it to spin in the flywheel housing destroying your flywheel,,Also use a white paint marker to mark the front driveshaft flange to the diff flange and also mark were the shaft lines up at the transfer case,,no guess work needed//JUST ASK A LIMEY,,,,,Very good Video..SIR BILL
william suleyman pouring it in gear is actually a very good idea! Would have saved me having to pull down and reach inside. I didn't even think about the pilot bearing doing that tio the flywheel. I guess if it seized out would definitely do some damage. Thanks for the tips, it's always good to get some more knowledge.
No worries,,Always happy to help
Doing a clutch always sucks! Good work
Thanks bud, and yes they can.
TJ Mitchell Films
Thank you. Nice video.
Leo M. Mara your welcome
Your truck is beautiful.I've done numerous speedy sleeves on toyota 22r oil pumps be careful putting it on they bend easy but if you do it right i've never had one fail
Question on install.
Trans is in neutral. Back in the day we turned the output of the Tehran’s to line up the clutch and input splines.
Maybe you can’t do that on the Sammy.
Other that that and those rubber gloves. LOL.
I can’t get past guys that are afraid of a little dirty grease on your hands.
But I’m 64 and we didn’t have them around when I was wrenching all the time.
Great content, really great instruction.
Thanks.
Very nice
Fantastic job my friend! You put a lot of effort into this video. Swapping VW diesel into Suzuki Sidekick myself next week. Some really good points in this video that helped. Question: _If_ there's any play on the input shaft or the tip is worn do you think that's a huge concern or if the _play_ is within millimeters would you let it slide?
Prepper Logic, the real problem with letting things slide, even when they seem small, is how expensive, and troublesome they can become. Your talking about doing a transmission rebuild to fix the problem?
The shaft itself has very little play in the transmission - less then what can be seen in this video (ua-cam.com/video/91pK1aGki9A/v-deo.html). The tip is worn. I've heard that some guys use JB weld to give it more thickness or even an extremely small shim to go over the input shaft which seats perfectly into the pilot bearing. I don't think I want to rebuild the transmission but rather simply replace the input shaft itself although the JB Weld route sounds appealing. It's similar to what's seen here (goo.gl/mVioi6). I might be overthinking it? Any wear on your input shaft tip that you've seen in your days that's raised any cause for concern?
Really got a chance to look at that pic, sorry it took so long. From what I can tell from the pic you sent is that the Input shaft wont get the proper support it needs on one side causing the clutch to get hung up in the future. This will also cause premature bearing failure on the needle bearing in the end of the shaft and the bearing that supports the input shaft in the transmission. As far as needing a whole rebuild, the problem with the input shaft is that the main bearing supporting it inside the transmission is that it has a ring around it locking it in place. You would have to separate the rear half, split the case and then remove the main shaft assembly to get that input shaft off. But as long as all your syncros and bearings are good, just pull the input shaft off and replace it. Or you could take it to a machine shop, have them machine it down, or maybe build it up and replace the pilot bearing with a different bearing to account for the new input tip diameter, But then you wouldn't be able to use stock pilot bearings that come with clutch kits. That maybe more trouble than its worth. as far as the JB weld method, this could work, but as far a longevity is concerned, I have no experience regarding that so I couldn't tell you if it would be a long term fix. I hope this helps.
In that video, I don't know what the spec for runut is, but to me it looks to be excessive and thats what caused the tip to wear out.
You mentioned using a speedy sleeve on the grooved crank seal surface. Im currently rebuilding a spare 1.3 for my Samurai and was unable to find a speedy sleeve that would work for the rear main. Just for future reference do you know of a source or a part number?
Turns out that the timing key was was also mangled and fixed with JB Weld so I decided just to get a reman crank.
I’m really liking your videos so far. Keep it up.
Rich Miller, OK that's good to know. I have used a speedy sleeve on another motor I've fixed before, and haven't looked into it yet. I'll try to see what I can find though and post it.
Great video. My son just picked up a 91 Sammy as a project. Clutch was shot, so this helped a lot. Did you bedliner the underbelly of yours? I noticed it on the inside floors. Did you go full frame off, or rebuild yours somewhat still together? What brand of bedliner did you use and do you recommend it?
Ed Beres, I only bed lined the inside and the outside rocker panels. I was told by a guy I know IRL that rhino lining the underside isn't a good idea because it's too ridgid/stiff and if it chips/cracks water can get behind it and get stuck in between the lining and the body causing rust over time. He recommended Rustoleum Enamel paint gloss black. The gloss because it's easier to just spray a hose knock off diet and mud. You could use any color you you like but I would definitely recommend gloss, because it's easy to clean. And I did pull the body off the frame. My tin top only took 2 ppl to lift. But I did pull every thing mind you. The seats, dash, seat belts, windshield, etc. The rhino liner I used was extreme liner. It's a great liner, but I've also heard really good things about Raptor liner too.
bravissimo,spiegazione ottima..saluti da max italia ciaooo
Great video! But may i ask, does the propeller shaft (transmission side) need to be aligned with anything before putting it back in?
Thanks for the video ELK! actually i need to change my clutch on my Samurai, im gonna try my best! greetings from Costa Rica!
Grat video . But after the replacement a have a revers gear problem. And I have no idea why. Can you help me please. I already adjust the clutch line screw and nothing. When the engine is on is almost impossible to shift the reverse. When the engine is off everything is fine. Pleas help me my friend!
Hi! Wondering where you sourced the harness for the radio, i'm fixing up my 87 Samurai and don't want to buy another plastic OEM part that will inevitably break again.
Patrick Hayes, the wiring harness I made my self. But the radio box is from LROF
Do you know, or know someone that knows the input shaft spline count for the JA11? The reason for asking is I'm curious whether a Samurai clutch fits the JA11 input shaft
Can you do a video on how to adjust the clutch cable and troubleshoot that? I'm wondering if I need a new clutch or if I just need to adjust the cable? Thanks great vids by the way I had to subscribe!
10-4, I'm working in Houston right now, so it will be on the budget build truck. I may actually change out that clutch cable because it is a cheap aftermarket one and is very flimsy.
hi men, im starting suzuki samurai proyect and i may be need some support with some issues too technicals, for example can you explain how to buy and instal holley 5200 carb. and what is the measure jetting please!!!
im sorry my english is empiric jaja.
Alfonso Barrientos , I've seen them on eBay. I'm not sure on the specs of the carb or if you would need an adapter. It's not a very popular swap in the states. The Toyota 3K is though and it bolts right up to the samurai.
how much does that transmission weigh can I handle that clutch replacement without a transmission jack, I am planning to work with jack stands
where did you buy your pinion flange s from ?
My dads boss just gave us his old samurai it blows allot of white smoke when its warm just replaced the water pump and timing belt. No overheating issues.Any help would be appreciated. Thanks
chris Luna have you changed the oil? Usually these little motors like to get a leaking head gasket
How do you remove the short driveshaft that comes out of the trans? Its to tight to remove it
dzięki ziomuś :)
@2:50 is when I would need someone to call an ambulance
Question: put in new Petro works clutch and now can't get it into gear also tried 2 new clutch cables it's the right clutch things are lined up throw out bearing good...any ideas what else it could be
Did you have this problem before? Can you get it into the other gears no problem, it’s just a problem with 2nd? Is this with the Truck running out off, driving it or sitting still?
Can you make a video on adjust the clutch cable?
Tengo un samurai 88 en Chile y ya he cambiado 3 kits de embragues oem completos y no duran nada al sacar los discos usados estos salen con desgaste solo en una parte del disco es como que la prensa estuviera torcida cambio de nuevo todo el kits y vuelve a pasar lo mismo me puedes decir donde puedo comprar ese kits completo muy bueno tu canal saludos desde Antofagasta Chile
At 29:21 you put a cover over the flywheel. My samurai doesn’t have that cover. How essential is it to have the cover?
Hello, petroworks clutch is out of stock. Has anybody tried the "Roadless Gear - stage 3 'Goldilocks' clutch"?? How is it?
Works on all samurai years.i have the 1992 sj410.
29:58 You tell us to open some thing up. Can you show a picture off how to do that? I have problems with fitting my shifter back to place.. Thankyou!
Viktor Nehr , down in the opening that the shifter fits into on the transmission you'll see a flat, flagged pin on the left and right side that are being pushed toward the center of that opening by springs on both sides. You can use a flat head screw driver to push them back toward the outer edges of the opening. You won't be able to open them all the way, but you only need tio make a little space so that the end of the shifter can slide in. Also make sure that your transmitting is in nuteral.
Hello, realy nice Video. unfortunatly in english. Best Regards from Germany :)
I need a translator, I have a lot of ferrets in Germany.
how to change carburetor nozzles, please!!! Thank you!!!
Bro, can the pilot bearing cause oil leak from this junction point? I have a leak here so this video has been really helpful. Thanks
Not directly, but possibly indirectly. So from an engineering stand point, anytime you have a shift, you would preferably like to have out supported on both ends. Because this shaft turns, bearings are used. Your input shaft and output shaft of the transmission are independent of one and other. The pilot bearing supports the front of the shaft, and a larger bearing near the end is around the outside input shaft just before the gear that is messed up to the cluster shaft. In front of that bearing is a seal that keeps gear oil in the trans. If the pilot bearing were to fail or not be there, it could put more lateral force on the bearing in the transmission and possibly mess up that seal. But you would probably have other issues first. Remember that the input shaft also supports and centers the clutch in between the pressure plate and fly wheel.
It's actually more common for rear main seals to go bad than that. But this would be engine oil and not gear oil. How this helps.
Greet video sar
Is the Samurai transmission especially quirky to work on? I'm having a shop do mine, they specialize in Saabs but will work on anything. My throw out bearing is whining, so might as well do the clutch and flywheel kit. unknown miles. I trust them, but should I take it to a Samurai experienced shop? Not something I'm ready to do myself. Great video!
It's a straight forward manual transmission. Very simple design, and doesn't require any specialty tools. Only tools that you would need that your may not have is snap ring pliers and horse shoe retainer ring pliers
TANKS
I have been maruti suzuki samurai 410 on 1986 model. I am from Mizoram ( mizoram is a one state of union of india) it's very intresting video i like it. Please share it how to replace a engine head gasket...
Lzuala Rawite, I have a video on disassebling the motor and will be putting it back together soon. So stay tuned.
What is a speedy seal?
It's a company that makes these machined sleeves that you can put over a shaft that has a damaged machined surface. It's a way of fixing a machined shaft without losing O.D. and having to disassemble then taking it to a machine shop.
How about bottom plate between gearbox n engine. Saw just install top plate only. Do you leave bottom plate and let it open and can see the flywheel from outside?
You have to pull it off to get the transmission off
ELK Motorsports noob question: meaning to say that the plate not secure by bolt n nut as top plate ? My mechanic loss that bottom plate and i no idea how to find it. Any sketch or detail drawing to fabricate it?
Zex Zaidi
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254184576491
ELK Motorsports thanks man.
Trey buddy. I got a 93ish 1.6 8 valve side kick engine in my 88' sammy. Don't know what my transmission is but I need to change the clutch assembly. Is this enough info to order a clutch kit or do I need to find out my transmission and or mix and match parts. I want to buy the clutch that you are assembling in this video but I live in hawaii and shipping cost and arm and a leg and takes 3 weeks so I want to get it right on my first attempt. Can you shine any light? Bro your doing an awsome job and I know your channel will take off. Aloha.
milton ahnee, aloha brotha. Usually the samurai transmission is retained. And that makes is easy because the stock 1.3L flywheel and clutch are used. You'll be able to check this also, the 2 top motor to transmission bolt holes will line up perfect, but the two outside bottom mounting holes will be off. On the motor side, the holes will be spaced more to the outside of the vehicle, and on the transmission, where the two studs are, they will be more toward the center. Usually an adapter is used to mate the two together. It will be as simple as just looking under your truck, and noting those two things.
ELK Motorsports right on trey. I found a 1/4 metal spacer and the 2 side bolts are off. 👍 Looks like I'm running stock transmission. In this case do you think going with this petroworks clutch would be sufficient? I'm running 6.5 in the transfer, unknown diffs at the moment and sitting on 33 mud boggers. Or do you have any other suggestions. Hey Mahalo for your time bro I much appreciate Aloha.
I like the petroworks, it has done well for me. I will be honest with you though. It only has 6,000 miles on it, all street. You can call up Myron from Zuks off-road, and you can get the clutch that they use with the turbos.
ELK Motorsports thanks for the help trey 👍 your alright. Aloha brother.
milton ahnee your welcome!!
Lol, I thought I was on a video to replace the clutch cable and then I saw the drive shafts and tranny coming out and i was like... omg WHAT
Bonjour
Est ce que c'est possible de remplacer moteur suzuki 3 cylindre 12 v par un autre moteur Suzuki alto 4cylindres 16 V ?
MERCI pour votre conseil .
Zak Kimo, the only problem I could see going from a 3 cylinder motor tho the 4 cylinder motor would be the transmission. Over in the states our samurais come with a 4 cylinder 8v and we need an adapter to put the 16v motor to our transmission. Or we can just use the 16v cylinder head on the 8v block. I don't know if this answered your question or made new ones.
Thank you for your answer
I really don't know if an adapter is needed in my case or just put a16 v head on the 12 v block
by the way, the engine i would like to replace ( 12V) has with manual gearbox
Thank you for your advice
@@ELKMotorsports
Zak Kimo, your very welcome.
Wait.....there is supposed to be a spacer between the transmission and engine? I’m pretty sure mine didn’t have one. Also, great video!
Matt K that there is, sir.
What product did you use to paint your dash with?
James Macman it's some vinyl dash paint I got from advanced autoparts
I have a Suzuki JIMNY (JA71c) RHD 550cc TURBO....do they have the same trans as the United States samurai?
FRANKIE MENA, unfortunately they do not. But majority of manual transmissions, at least in older vehicles, are arranged the same internally. You would only need to find out your torque specs.
Thank you so much for your help 😁👌
Mine leaks too do you have video to replace that seal?
franco M not currently, but it's not hard once you get the transmission off. I have a spare block that I could show you the process, if you'd like?
Sure that would be helpful
Hey brother, you forgot to mention the two wire plugs on the top of the transmission that need to be disconnected.
Hello there I have a 1994 Suzuki Sidekick 4 wheel drive 16 valve I'm having problems shifting into my gears after about 30 minutes I can shift and it'll run but it's just gets hard to shift into the gears what can that be? I would be very grateful for any help here to steer me the right way.
outdoorsey fun, does the shifter feel sloppy?
@@ELKMotorsports no the shifter does not feel sloppy.
outdoorsey fun, there is a small nylon bushing that goes on the end of the shift, down in the transmission. This had a tendency to crack and break, also there is a bushing that acts as a cup for the pivot point of the shift that can wear out. This is the cheapest and easiest to check, replace, and/or upgrade. I would start there.
@@ELKMotorsports ok will look into that thank you.
Sir also a clutch cable that's not adjusted properly do you think that maybe one of the reasons that it's hard to shift?
HELP! I just installed my clutch but I don’t remember which way I put on the clutch disc.... it makes a hissing sound/sandpaper sound while I engage clutch. Could this be the reason? Let me know please, thank you.
Space 671, generally you can only get the pressure plate to bolt up to the flywheel with the clutch disc oriented one way. ( some combinations are an exception) But usually, on the samurai, the clutch dish has one side that has a portion near the center hub that protrudes out with some visable springs in it. This side faces the pressure plate.
ELK Motorsports so you’re saying I wouldn’t be able to install the clutch at all if wasn’t facing the right way?
Also can you explain the hissing sound I get while releasing clutch pedal? Basically when it starts grabbing 1st gear I can hear the hissing noise....I’m still worried about the noise
No, anything is possible, but it would be extremely difficult to install backwards, ( in most cases). With a samurai that portion that protrudes out would contact the flywheel and prevent the clutch disc mating surface from contacting the flywheel. This in turn would keep the pressure plate mounting ring from sitting flush up against the flywheel. And the stock length mounting bolts are not long enough to get the assembly bolted up.
Did this noise exist before?
Did you replace the pilot bearing?
Did you replace the throw out bearing?
Is the proper amount of throw out bearing end play been set when the clutch cable was reattached to the lever and adjusted?
It's very hard to diagnose a noise when you are not there in person, but this is where I would start.
Do I have to take the pilot bearing out?
Ricardo Maldonado it is highly recommended to replace it when doing a clutch.
I love working on my Suzuki... After all the V-8s' and my 7.3 Powerstroke (ZF 6 speed) The Suzuki is almost like a remote control toy... Had a cylinder head arrive in the mail & it actualy fit in my mailbox LOL!
The ZF 6 speed & t-case are HUGE! Probably weigh half of the entire Samurai...
With a custom ramp & on stock wheels, my Samurai fits in the back of my Super Duty!
That's awesome. Instead of a spare tire you have a spare truck lol.
How much does the transmission weigh? I am surpised that he handles it with ease.
Teoman Metehan, approximately 60lbs with oil.
I used same clutch few years ago, and didn't last more than 30000 km... Stock engine, stock tire size not to much offroading..., just everyday drive. I am so disapointed! Now i am runing OEM clutch (another 30 000 km) and it is just fine, sometime it smels on hill but it holds vey well.
I didn't like the disc that came with the petro works clutch. Took it out, used a stock Asin clutch disc with the Petro works pressure plate. It has been very smooth for 6 years now.
Where do you buy the parts
Machine Addictive digging the clutch is from petro works. I really like that style of clutch.
It always helps me to use a lot of profanity when trying to get that transmission pilot to line up.
What exactly are you doing around 2:25 - 2:28??
2:25 I'm pulling the front drive shaft, and the very next cut I'm reaching I'll from the bottom of the truck to remove one of the bolts/nuts that secure the transmission bell housing tio the motor.
Good video; I'll be doing this job soon. You might want to consider welding a truss on your front axle. Those axle tubes are a bit skinny.
Glad it was helpful for you.
has anyone used this tutorial to line up the clutch and pressure plate? i followed this and my clutch wont engage at all, theres a lot of stuff online saying the flat side of the clutch goes toward the flywheel.
Kyle Mcneley 10:27 that's exactly what I did
Kyle Mcneley also 15:37 I demonstrate this
@@ELKMotorsports .....I see those now.. I may have used the reference at 10:56... would that be why it wont shift and grinds reverse?
Kyle Mcneley, it's cool. I was trying to see if I hadn't said anything about the orientation of the clutch plate at all. Sorry it was a little unclear.
Kyle Mcneley, and to answer your question. Yes, the spring pack is interfering with the pressure plates ability to sandwich the clutch. This is preventing it from dissenting the clutch and won't allow the transmission too slow down enough to engage the gears properly
24:28 And here is the time you learn how to swear.
Em i think i need to replace mine
that clutch alignment tool should buy that motor dinner first atleast
gullf1sk I know right!!
yeah grease it
Ni nziza
Please stop putting music yo these videos it you must it needs to be low volume