How To Check And Adjust Injector Nozzle Pressure Of 4D56 Diesel Engine Single Overhead Camshaft.

[@angelochavez2085]

nice one sir sana next time tagalog na lng hehe

[@imussewingpartskapatid]

Very good tutorial. Exavtly what I needed to know.
Question: All 4d56 engine has same psi requirement? I have a 2010 mitsubishi adventure Glx with 4d56. Will w8 for ur answer before I start butingting

[@autofixgarage5438]

Yes all 4D56 single overhead camshaft are the same pressure. Thank you sir. To God be all the glory.

[@imussewingpartskapatid]

@@autofixgarage5438 thanks for replying sir, subscribing now. one more question, is it necessary to use teflon before installing back each injectors to the engine? i did not notice you did that

[@autofixgarage5438]

@@imussewingpartskapatid no need to use Teflon sir.

[@gma484]

salamat sir sa titorial mo maganda po ang pagawa

[@autofixgarage5438]

Maraming salamat din sa inyong supporta sir sa ating UA-cam channel makakaasa po kayong sa susunod pang mga tutorial maraming kayong mapupulot na kaalaman. God bless po.

[@freedompielago153]

dito sa Pilipinas mostly ginagamit natin na pressure gauge ay kg/cm2 or psi (lbs per sq. inch) kung gumamit ka ng mega or kilo Pascal baka marami hindi aware ang convertion from kilo Pascal to kg/cm3

[@freedompielago153]

just a simple question, bakit sa pintle type nozzle tip bakit merong pre combustion chamber

[@BboyKozijn]

where do i buy the shims? i live in canada.

[@autofixgarage5438]

Use the coke in can of softdrink Boss cut it to a small piece.

[@BboyKozijn]

@@autofixgarage5438 thanks boss :)

[@alexandrupaul5098]

Nice tutorial, respect! Where have you bought those shims sir? Please a link if is possible, also the tester used for injector fuel? Many thanks'!

[@autofixgarage5438]

The adjusting shim sir was given by my friend from calibration center I don't know where they bought, the injector tester is Bosh.

[@crisdoria9547]

Thank you sir,,,god bless po,,

[@autofixgarage5438]

Thank you rin Boss sa supporta sa ating channel. God bless po

[@crisdoria9547]

@@autofixgarage5438 maraming salamat den po sir

[@theboxingreviews]

ano po part number ng zexel para sa adventure diesel 2010? meron kasi 105007-1300 at meron din 105007-1120. ano po pinagkaiba ng dalawa at paano malalaman kung alin dyan ang tugma sa papalitan?

[@autofixgarage5438]

I'm not sure kung pareho lang yung dalawa, tulad ng Nozzle tips ng injector ng 4D56 single overhead camshaft MIMD620189 or MIMD620889 original part number yan sir choose which is available. God bless po.

[@195mkr]

What is the diameter of the washer you are using?

[@autofixgarage5438]

The same outside diameter of adjusting shim sir, you can use the thickness of shim from 0.01 and up to adjust the injector nozzles pressure 😀.

[@shemdecastro3599]

Sir parehas lang din ba ng injector nozzle ng adventure yan? Ano po kaya part number nung nozzle nya?

[@autofixgarage5438]

Pareho lang sir, MIMD620189 or MIMD620889

[@niloyu105]

Parehas din poba ito sa standard pressure ng Innova 2018 or ano po Ang dapat or puwede napoba matanong Kay Pareng google Ang mga standard pressure ng mga fuel injector calibration? More power Kabayan watching from Al Khafji Saudi Arabia 👍

[@superfoood4618]

Boss ask lng ano epekto pag mababa Ang pressure at mataas Ang pressure ano Ang sintomas sa andar. Salamt Po always watching 💯👏🥇🏆

[@autofixgarage5438]

Kapag under pressure hindi maganda ang spray pattern ng injectors, hindi pa umabot sa ideal na pressure naginject na ng fuel si injector, kaya maraming epekto,black smoke,fuel knock,low power etc, kapag high pressure naman low power ang makina dahil insufficient yong fuel na kailangan nyan sunogin,at iba pang symptoms. Sana makatulong Boss, maraming salamat sa supporta sa ating channel, God bless you always.

[@superfoood4618]

@@autofixgarage5438 maraming salamat Po.

[@autofixgarage5438]

Your welcome Boss

[@imussewingpartskapatid]

@@autofixgarage5438 Wow, ang galing nyo sir. Ito ang mga info na kailangan ko before i start my next butingting project. ito malamang ang nangyari sa advi ko nung last ko pinalinis injectors. Ask na din sir if how much usual fee palinis at pagset sa standard setting per injector. Location nyo po?

[@jurebrac]

Thanks...so 150 bar for 4d56 engine..

[@autofixgarage5438]

Yes sir 151.9 bars - 161.8 bars for 4D56 single overhead camshaft. God bless.

[@eduardodaquiljr9637]

Ano Po lubricant I spray sa injectors Bago natin I remove?

[@autofixgarage5438]

Diesel fuel Boss puede na as lubricant

[@jasferdomingueztolawan2444]

Pareho po ba pressure ng pang turbo

[@autofixgarage5438]

The same pressure lang sir sa may turbo or without turbo.

[@jalvalenzuela]

Sir pwede ba magpagawa sa inyo nyan? 4d56 L200 din po

[@autofixgarage5438]

Puedeng puede sana sir pero wala ako sa Pinas, salamat sa tiwala, To God be all the glory!

[@abelcalingayan7232]

Gud pm bro. Tanong may nabili akong zexel na brand na nozzle tip ay ikinabit namin ay umiinit ang makina di ba maganda na brand yan...

[@autofixgarage5438]

Uminit ung makina pero hindi nagoverheat Sir normal lang na uminit ung makina dahil napalitan ng magandang brand na Nozzle tips kaya maganda ang andar ng makina.

[@jmsjr826]

dapat pinalitan din ng bago mga copper washer seal.

[@autofixgarage5438]

Wala pong copper seal sa injector na yan boss, napalitan ko yung aluminum gasket ng fuel return hindi ko na po isinama sa video, Thanks po

[@dirtdiver634]

Gud day po, ano po maganda n brand ng nozzle tip ang ilagay para sa 4d56 po. yung Denso brand po b o yung zexel po,.salamat po

[@autofixgarage5438]

Parehong maganda at subok na yung denso at zexel sir, pero this time zexel ang ginamit ko.

[@papaypinoytv]

Saan po boss pwede mkabili ng shim.may recommended seller kaba?salamat

[@autofixgarage5438]

Sa ngayon sir wala ako mairecommend na seller, yung shim ko bigay lang ng friend ko na nagwowork sa calibration center, minsan kapag wala akong shim cut ako ng coke in can yung gamit ko.Maraming salamat boss.

[@papaypinoytv]

Thanks boss

[@autofixgarage5438]

Your welcome, salamat din sayo boss. God bless.

[@edwardmunsayac1650]

saan po location ng shop nyo tnx

[@autofixgarage5438]

Wala pa sir, in God's will. Thanks

[@jasferdomingueztolawan2444]

Ilang Mm Po Lahat Ng Shim Nung Dinagdagan Mo Ng Adjusting Shim??

[@autofixgarage5438]

I added 1pc adjusting shim sir until it reach the standard pressure.

[@xSO20]

@@autofixgarage5438 anong psi po ung standard pressure ng sa 4d56 mitsu adventure?

[@autofixgarage5438]

Ang standard opening pressure sir ay from 151.9 Bar to 161.8 Bar, God bless po.

[@niloyu105]

​@@autofixgarage5438napa pindot tuloy Ako Ng Kalembang 👍 meron Ako napanood inipit or pinaiksi Naman niya ang spring para makuha ang tamang pressure calibration... Ok lang poba ito keep watching and support from Al Khafji Saudi Arabia...

[@niloyu105]

​@@autofixgarage5438Sir mga ilang odometer or year masasabi puwede na magpalinis Ng fuel injector salamat. Meron Ako Innova 2018, 120km odometer

[@dumindurandika9366]

Is there job vacancy

[@autofixgarage5438]

We're not hiring boss

[@reynaldogarabilesiii3216]

Sir ok lang po ba kahit 120 ung pressure?

[@autofixgarage5438]

Kulang sir kung ang pressure ay 120 dapat nasa standard value.