Rv painting explained
Вставка
- Опубліковано 10 вер 2024
- Rv painting explained in this video i walk you through the steps it takes to do paint repair on your own rv!
For an categorized list of tools and materials I use .check out my Amazon affiliate store!
CLICK HERE!
⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
If you have any questions leave them in the comments below.
Do me a favor and SMASH THE SUBSCRIBE BUTTON it doesn't cost anything and is a great way to support the channel.
I truly hope that you enjoy the video and it helps you with your repair!
Disclaimer as an Amazon Associate I earn a small commission (at no additional cost to you) from qualified purchases. I will not recommend any product that I do not use personally.
Amazon links to products i use:
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
SEM 38203 Black Guide Coat - 12 oz.
amzn.to/2DXElqg
Astro EUROHE103 EuroPro High Efficiency/High Transfer Spray Gun with 1.3mm Nozzle and Plastic Cup
amzn.to/3kTGJij
Speedokote SS-2790G-Q/SS-2790A-8 Super Fill High Build Primer Gray
amzn.to/2Y9mnbb
Bondo Gray Filler Primer, Highly Durable & Easy to Use, 11 oz, 1 Aerosol
amzn.to/3flt1Rm
Kleanstrip Prep-All Wax & Grease Remover, Gallon (KLE-GSW362)
amzn.to/30nRBwV
Premium Tack Cloths, Bond Crystal Brand 18" x 36" 12 Cloths Per Box
amzn.to/3jXFqi5
U-Pol 2892 High Solids Urethane (4.4 VOC) High Solids Spot Repair Urethane Clearcoat Kit with Standard (65 to 90ºF) Temperature Hardener
by U-Pol Products
amzn.to/311CVTc
Mirka Abrasives Mirlon Total 4.5" X 9" Scuff Pads, Ultra Fine (1500 Grit)
amzn.to/2D6OKiO
Be sure to check out my other how to videos on paint and body repair.
👍⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
how to use body filler to repair a dent
• Auto body dent repair ...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain... isclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise
Great video .. gives me hope with repairing a hole in our trailer .. looks really nice!! .. thanks
Thank you excellent description of your process!
It is nice to see the technique. if you could make note of the specific materials and tools so that we can by them, it would sure help us give it a try. Thanks
Yes, i will thanks for the comment!
Great explanation, looks like a lot of work but you explained it well. I have a small area that I might want to fix and this will help.
Good video and well explained 👍🏻🤙🏻
Great video! I’m about to paint my entire vintage caravan. I’d love to know exactly what kind of paint to buy for this.. also do I prime it, then sand it, then paint it?
Thanks for the comment Do you need to primer before you paint, that depends on the condition of the current paint if it's just a bit faded and not cracked or peeling you may be able to get away with just sealing it and then painting. I will leave a link to a video you should watch about prep before painting. As far as what paint to use nason xl good coverage reasonably priced. Then clearcoat which you could also use nason . I have many videos on painting basecoat/clearcoat.
What would you use to cover a puncture dent in a aluminum rv looks as if someone drilled into the side with a dull drill bit...
It's hard to tell without seeing it. Depends how large. Some have used silicon on small holes. They also make some tape for that purpose otherwise you have to replace panel.
w&g right before gel coat? asking for pop or issues down the line, i think.
No gel coat this is automotive clear.
What about removing wax before you sand? How dire is that? Also what’s the brand of wax remover you use? 3m?
Yes , use wax and Grease remover. Link in description to what I use.
I am giving a 1994 bounder a face lift and I was wanting to know what type of primer did you use? Thank you
I don't know specifically what brand it was but you want to use a 2k urethane primer. You local automotive paint supplier will carry it or Amazon there should be a link in the description of this video. Thanks for watching!
Roughly how much would someone charge to do this? I just have two tiny screw holes. Thanks
Roughly 600.00 It would vary, I would try smaller body shops and shop around.
this rv is painted? How do you know if it is paint or gelcoat?
It really doesn't make a difference you can use automotive paint and clear over gel coat. Gell coat is much harder to work with. I believe most rvs are painted. Most boats use gel coat
What’s the name of the paint you used?
Nason is the paint
How do you match your paint to existing?
Oreillys will come out and scan it.