Suzuki Intruder C800 Exhaust Mod

Поділитися
Вставка
  • Опубліковано 22 кві 2016
  • So I showed you the usual modification for an exhaust system, the one I did on my Dragstar. Well there is a further mod you can do to better the sound of your exhaust on the Intruder.
    The microphone on the camera really doesn't do justice to the difference in sound and quality, for that you have to do it yourself and see.
    All elements are created by me, for the purpose of this channel.
  • Авто та транспорт

КОМЕНТАРІ • 25

  • @halseyballistic
    @halseyballistic Місяць тому +1

    Awesome!

  • @whoamiuk1
    @whoamiuk1 8 років тому +1

    Apart from the great sound the best part of this vid was just after when you said.." hehehehe" hahaha great, i can just see the smile on your face from here lol

  • @julianrehmann4934
    @julianrehmann4934 7 років тому

    I laughed so hard. Thx m8.

  • @ericparton1792
    @ericparton1792 Рік тому

    Smokey Joe not surprised your out of breath the way that smokes lol

    • @Gothtecdotcom
      @Gothtecdotcom  Місяць тому

      Actually I have knackered lungs from a bike accident, didn't help when covid hit.

  • @alexdulacioiu5750
    @alexdulacioiu5750 4 роки тому +2

    Whats with that smoke mate ?

  • @BikerMooseFromMars
    @BikerMooseFromMars 4 роки тому

    Never seen it done this way before, can I ask why you drilled holes in the plate? Also does this technique not break the welds on the baffle and leave it rattling in the pipe? Other vids I have seen they cut out the back plate completely and then break the baffle welds and pull it out all together

    • @Gothtecdotcom
      @Gothtecdotcom  4 роки тому +1

      Previous hole, from previous mod, but opted for the punch instead.... This is a very common mode that even the dealer that sold me the bike, offered to do this for me
      I said "Nah, I will stick it on youtube!"

  • @darekp8746
    @darekp8746 7 років тому

    Nice sound! Just a question as I can't hear well in the video -> after doing that part with hammer, you get "louder" sound or "thicker"? I drilled a holes with fi 8 (then with fi 12) in my c50t pipes, but the sound is just louder and wonder if that part from your modification will bring "bass" improvement.

  • @steamwillrise
    @steamwillrise Рік тому

    Just wondering if you ever went through the second plate? I did this mod on mine and now I've got used to the increase, I want more.

    • @Gothtecdotcom
      @Gothtecdotcom  Рік тому

      It's about back pressure, if you keep the system standard then you will run lean, if you go through the second plate then the intake needs to be adjusted.. either a remap or new jets on the carb

    • @steamwillrise
      @steamwillrise Рік тому

      @@Gothtecdotcom mines fuel injected so no hassle with the carbs. I'll do some research into a remap. Would this be the same process if I was to install a set of straight pipes?

  • @paulirving2767
    @paulirving2767 Рік тому

    How do you go on about The loudness on the MOT?

    • @Gothtecdotcom
      @Gothtecdotcom  Рік тому

      Never a problem, my mechanics, who I have been going to for well over a decade, have never brought it up...

  • @user-gy1yo1bp4i
    @user-gy1yo1bp4i 4 роки тому +1

    Good afternoon. Smoke from the exhaust system is it coked rings on the pistons or oil seals on the valves?

    • @Gothtecdotcom
      @Gothtecdotcom  4 роки тому

      Doubt that, brand new bike, when I did this, barely done 500 miles...

  • @bamaboysmith2723
    @bamaboysmith2723 4 роки тому +2

    Vise grips!!!!!!😂

  • @user-wy4nn9er9o
    @user-wy4nn9er9o Рік тому

    Whats the width of the spike mate? Cheers.

  • @360virus
    @360virus 8 років тому

    Hey is project rat still going to continue

    • @Gothtecdotcom
      @Gothtecdotcom  8 років тому

      +RICH PIANO I do have plans for the Rat, but, here's the thing, Rats are moulded/matured not built. I have done the basics but I have to let time and the elements dictate what happens next.
      The elements, and chinese chrome, have dictated that the front forks are an MOT failure, therefore they have to be replaced. This will be a continued issue with this bike, so a plan has been formed. I just need to get hold of some new forks in the old rat way, as cheap as possible :D until then rattage ison hold.

    • @360virus
      @360virus 8 років тому

      +Gothtecdotcom haha good luck on your hunt sir!!!

  • @mrzoff3016
    @mrzoff3016 7 років тому +1

    er, it's not a mallet. It's a club hammer or lump hammer. A mallet is made of wood or rubber.
    Nice video though.