@bobi4i4o I own the Volusia in this video. We only drilled the first wall on the M50 and both on the Volusia. After riding around for a bit, my friend who has the M50 decided to drill the second wall as well. His bike sounds louder now. We also adjusted his idle speed and that made a difference in the rhythm and tone. -Ryan We both love the modifications!
@pbobi thanks for enjoying our video! our goal was to make it extremely easy for anyone to do this to their own bike, and to make it watchable. I will get with Chad and taek some vid of his bike after the second wall was punctured. look for it here soon... thanks again.
Moneyhauler, I recommend re-jetting, it isn't difficult, you will have to adjust float bowl also. but ryan never did and still runs great according to him.
@bobi4i4o i dont know exactly why the volusia is louder to begin with. i know that ryan (volusia owner) has turned down his idle speed and being carbureted probably has the most to do with it. the hole drilling around the baffle plate just lets out enough exhaust to increase the note. removing the baffle all together just doesn't sound good on this model bike, it does on others, like my vstar 1100 (video in production) good luck with your m50 modification!
Ozzy, not really sure... most exhaust are similar, if it was mine i would go for it. On my 07 Vstar, i was able to remove the last baffle all together, instead of drill around it. if you want pics or vids of what i did, i could upload a finished product...
Can I just drill the holes on the outside as you did instead of punching through baffle plates? I am not looking for too much loudness and not sure if punching through the baffles will have to be accompanied with some engine tuning as well.
I don't know that your get much power increase as it seems it may mess with your back pressure just a bit. Maybe displace from high end to low end power.
@pbobi Alright man... sorry it took so long but i have posted the video of the M50 in it's final state. it is simply called 'chad final'. not very creative. i hope you like the sound, i think you will...
It a construction stake, I was in my garage years ago when I bought my house. You will have to ask around your hardware/construction stores. I know that doesn't help much ,sorry.
I have an 04 Volusia. I am thinking about doing this mod but my bike runs a little lean already and Im wondering if you had to mess with the jetting in the carb or readjust the carb at all with releasing some of the back pressure?
Thanks Dawn, hope you and your husband enjoy the new sound. Ride safe!!
Sweet deal! I'm goin look into this for my '01! Also, the guitar riffs and drums fills got a good ring to it too!
@bobi4i4o
I own the Volusia in this video. We only drilled the first wall on the M50 and both on the Volusia. After riding around for a bit, my friend who has the M50 decided to drill the second wall as well. His bike sounds louder now. We also adjusted his idle speed and that made a difference in the rhythm and tone.
-Ryan
We both love the modifications!
@pbobi thanks for enjoying our video! our goal was to make it extremely easy for anyone to do this to their own bike, and to make it watchable. I will get with Chad and taek some vid of his bike after the second wall was punctured. look for it here soon... thanks again.
The steak goes right up the baffle?? No doubt producing a rich aroma of grilled beef for anyone riding behind you. Nice.
Thanks Tiff! Hope you enjoy it.
Moneyhauler, I recommend re-jetting, it isn't difficult, you will have to adjust float bowl also. but ryan never did and still runs great according to him.
Rick. Ryan's bike is carbureted. We didn't re-jet and he says it still running great 2 years later.
you can just drill those holes if you like, anything you do to the back end of the exhaust will get more air through the bike, and increase the sound.
Rick, it was not for either bike because they are fuel injected. If your bike is carbureted, like my Vstar, then I would look into it.
can you debaffle a 2019 m50 without any issues. it seems everything that I would like to do to my 2019 (specifically) becomes a long flippin project.
@bobi4i4o i dont know exactly why the volusia is louder to begin with. i know that ryan (volusia owner) has turned down his idle speed and being carbureted probably has the most to do with it. the hole drilling around the baffle plate just lets out enough exhaust to increase the note. removing the baffle all together just doesn't sound good on this model bike, it does on others, like my vstar 1100 (video in production) good luck with your m50 modification!
Ozzy, not really sure... most exhaust are similar, if it was mine i would go for it. On my 07 Vstar, i was able to remove the last baffle all together, instead of drill around it. if you want pics or vids of what i did, i could upload a finished product...
Can I just drill the holes on the outside as you did instead of punching through baffle plates? I am not looking for too much loudness and not sure if punching through the baffles will have to be accompanied with some engine tuning as well.
Does it work on Intruder 1400.. year 2004?...
Dod you have any power issues after?
I don't know that your get much power increase as it seems it may mess with your back pressure just a bit. Maybe displace from high end to low end power.
Just to clarify, back pressure is a myth..is does not effect bikes in the least. If you change the intake,then yes but exhaust no...
Would the sound be made better if you only drilled the holes and didn't put the spike through?
@pbobi Alright man... sorry it took so long but i have posted the video of the M50 in it's final state. it is simply called 'chad final'. not very creative. i hope you like the sound, i think you will...
Where'd you get the metal rod to knock out the baffle plates?
It a construction stake, I was in my garage years ago when I bought my house. You will have to ask around your hardware/construction stores. I know that doesn't help much ,sorry.
nah, it's okay. Do you happen to know the measurements of the stake? i.e. circumference or diameter?
I have an 04 Volusia. I am thinking about doing this mod but my bike runs a little lean already and Im wondering if you had to mess with the jetting in the carb or readjust the carb at all with releasing some of the back pressure?
No such thing as back pressure..
Hey Cody, did you do or do you think a rejet is necessary after this mod??