iPad Touch Problem from Motherboard Repair Tutorial【Common Problem】

Thank you Apple for a such a wonderful design!
From iPad Air 2 until iPad Pro has a common problem from the motherboard touch circuit.
It's either touch circuit burned or CPU disconnection needs to reball.
To end-users:
This is the reason that we said need a day to check before we replace the LCD.
Online Course is available:
www.iphone-repair.my/sale/onl...

[@ehterrekber9098]

I’ve been watching your older videos over and over again last few days, and was wondering when you were gonna upload again. This was such a surprise 🎉

[@VK-ff6wb]

Me too, Waiting for his video. I Lean's lots from his videos. I'm planing to joining online course.

[@ehterrekber9098]

@@VK-ff6wb you absolutely should. I’m his student and it’s well worth what you pay.

[@jameswoll]

Please upload more! Thanks for sharing useful and interesting information.

[@vincentdadzie7818]

Great job, great content. Keep the videos coming master lim. We appreciate your expertise and hard work you put in making such informative videos. Thanks

[@johnlily2017]

I have learn a lot from this video ,
Thank for the update and great job, may God all mighty bless you,,
Am speaking all the way from Cameroon 🇨🇲🇨🇲🇨🇲🇨🇲

[@ismatullahmalekzai847]

Upload videos every day.
Thank you IPHONE SERVICE MALAYSIA 🇲🇾

[@youhannayousif3868]

Great video Thank you

[@khambhatiabdullah_4374]

Same issue solved by your guidance

[@iPhoneServiceMalaysia]

👍🏻👍🏻

[@samquirante3722]

thank you for for the video master.hope soon you upload on how to trace in 1.8 volts short.

[@gsmapple5940]

Always I see you the best bro ❤

[@ustazcommunication8907]

I have learned a lot from this video

[@Ameerjanan]

bless your heart man I love this

[@cimogt7857]

i love watching you video !

[@MAHMUDASERIA]

Master grear job... respect

[@digitalways514]

Best teacher...😍

[@alejandrofrane8366]

thanks

[@madushanweragama6702]

Thanks thanks sir gerad worck.

[@anuradhaperera9517]

Sir, can i know which power supply and multimeter do you use for repairing?

[@TTT-V]

amazing vedio

[@mmmmanipur1691]

Sir,mobile capacitor is have/no direction.we put any direction is ok or how to know right position of capacitor

[@ambisyosongvloger296]

mr. lim when is the next batch of the online class starts

[@alishakouri7795]

Hey I need help with changing digitizer and an issue I am facing, unfortunately the quality of flex cables of digitizers for replacement parts are not as good as the flex cables on the original digitizers, and when fastening them and connecting them you don’t get the clicking noise to make sure the flex cable is connected properly, but the digitizer works but after couple of days the iPad digitizer flex cable comes of the motherboard and so the digitizer stops works, is there any way to sit or fasten the iPad flex cable so it does not come off the motherboard ?

[@user-cp1mg1jd7c]

Vanakam master🙏

[@ashirahmad8855]

Where you have the motherboard on pc ?

[@kaefepc]

we miss you

[@rhgamehamel6350]

My iPod has the same problem is it repairable ?

[@azzamsaid1285]

hi master how much? schematic diagram and name your schematic diagram?

[@ROKEY88]

I feel like this video ended too soon.... 😄

[@Mradam912]

I hope every user of zxw would complain by a review or something about why ipads and some new iphones doesn't have more informations .

[@iPhoneServiceMalaysia]

Because Apple does not release the schematic or no one to steal it from them.

[@Mradam912]

@@iPhoneServiceMalaysia hey i dont think they need someone to steal it, resistances can be done with multimetre specially if there is a big team that would be easy for them to note every think .

[@iPhoneServiceMalaysia]

@@Mradam912 without schematic, you never know the coil spec, capacitor spec, the line label name and what it's doing... it's not about measurement. That's how software tell you what's the line purpose and spec.

[@Mradam912]

@@iPhoneServiceMalaysia hello again , ipad series doesn't have even risistance values i think they can measure that and put in schematics im not talking about component specs , and im sorry for arguing with you , you are master of your craft im just a beginner .

[@iPhoneServiceMalaysia]

​@@Mradam912 Well, an advice even a trained technician didn't know.
Let say there is a pin is 350 from schematic. You found 380 or 300. So you suspect a problem or maybe just different multimeter.
So the line name will help us to know it should be higher or lower. Example, i2c lines.
This kind of measurement techniques are important. It's the unique lesson that only my course has it. Some pro they know it but they won't talk about it.
or maybe a line that is 0.0025 that low. By looking at what's connected to, we will know it. Instead of blindly comparing to other board.