Thank you for the great video, I know I have found the place that will have some answers for me. I 've a 1989 Toyota Celica which came with 13" tires, which seemed to have disapperared from the face of the earth, so what wheel package can I upgrade to, keep in mind I have the famous 4X100 bolt pattern. Second how much will the upgrade cost and what is the availability of it. Are deep dish wheels a thing of the past as well? Thank you once again.
Hi, just wanna ask whats the best tire size to a lowered 1.5inch drop for an 18inch rims to a 2007 honda civic coupe? Which is not rubbing the fenders at front. Thanks
I would like to thank you for the video. I have 2016 Honda Accord Coupe. I have aftermarket wheels ( 18×8 38 offset with a 245 40 18 tire). I'm going to use H&R springs which will be a 1.3 drop. I want to know is a 225 45 18 tire ok to run on a 18x8 wheel? Thank you.
67 mustang fastback ,looking for the old school deep dish look,15,x8.5,3.75 back space,american racing wheel,245 60 15s on back,hope it works with out cutting the rear to fit!!! help!!
I wanna put 33/12.50/17 tires on my truck but dont want them too rub ... do I need a offset on them or will they still work as long as I still use a 17 inch rim or will it require a wider rim.thx
Hello thank you for info, unfortunately I've already put bigger Wheels on my car now they seem to be working out okay and driving fine but the back wheels seem to be tilted slightly in words at the top very very subtly but I've noticed it is this okay and safe? Thank you for your time
I have a 2011 Kia Sorento with 41mm offset, 17-7 rims, 235/65r/17. I would like to replace the factory rims with a set of Lexus rims, offset 30mm, 18-8. Both wheels have 5-115 bolt patterns. Can this be done? Thanks.
I have a Mercedes 2005 500 SL standard. My owners manual states that I can use to 255-40 R 18’s on front and rear wheels. Can I use to 255 -45R18’s also?
Iv'e got a 1977 Thunderbird that has the original wheels and hub caps. I was wanting to know how wide of a rim and tire that would fit without rubbing issues or throwing the speedometer off, staying with 15 in diameter but wanting the deep dish look with a classic slot, centerline or torque thrust wheel. Thanks, any info would be appreciated.
Daniel Young, Because you want to maintain the OE wheel diameter of 15 inch, you’ll have to keep using a 4 inch (factory) backspacing on the front for proper clearance to the tie rods and control arms. On the back though, get out the tape measure and measure from the face of the brake drum in to the first point of contact like a leaf spring, shock or frame rail. Subtract 1.5” for sidewall bulge on the tire and some clearance, and this will be the backspace measurement you can use on the rear. This approximate of course but will give you a starting point.
Can I put 195/55R/15 tires and 15x6 wheels on a car that is made with 195/60R/14 stock tires and 14x5 steel wheels. Could I just take the 14" tires and wheel off of the car and slip the 15" tire and wheel on or would I need any other items to make it fit? Sorry I'm only 18 and still learning about cars.
+HATER TROLL , Can you give our tech department a call? We need some additional information from you. We look forward to your call! Thanks for watching! 1-330-630-0240.
Hi, I have a 65 Impala. What size of Rim would be considered and Width. I had in mind 20's in the rear, 18's in the front. open for suggestions, thanks!
Hi there. I currently have 265 width and 22 inch rims on my lexus rx 330. I was wondering what the largest size I could fit on the rear without modification. I was willing to do some modification to accommodate 315-335 mm tires in the rear. Please help
chillinxxpaki69, Once you determine the tire brand that you will use, check their website for dimensions. Armed with that data and a tape measure, go out to the car and see just how much modification will be necessary and if you want to go that far. Most likely you will need to contact a body shop for the modifications!
Hey just asking if I wanted to put 17 inch rims which are 235/45/17 on my vs if that fit and be okay I'm on my P's and asking if I wouldn't get in trouble with them thanks heaps
Adam Hagen , We need some additional information from you. Can you give our tech line a call at 1-330-630-0240? We look forward to your call. Thanks for watching!
I am trying to add some 15x7 on my Silverado its an 01 but the caliper clearance is well ass cuz the caliper touches would anything happen if i grind down the caliper just for it to fit one side slides in but one side doesnt
My question is I have a 1994 mustang gt With stock wheels and 4.10 gears And I am looking for new rims/tires I was looking at 255/40r17 front 275/35r17 rear Or some people said 255/40r17 front 275/40 r17 rear What do you suggest looks best and would work best? Extra info The car is a daily driven car From texas stock suspension for now And what rims do you suggest with the car? The color is teal and dark window tint Budget doesnt matter for now
I'm looking into buying some aftermarket rims and tires for my truck I want the rims to be offset to give like a mud install effect probably a couple inches what would I need to get without using wheel spacers
I drive a 2003 kia enterprise ceo and i have on them 225/45R18 am thinking of changing the tires to a 235/50R18 tires due to the bad road condition but i dont know if the car can handle that.
i have lancer with 215/45R18 wheels. i want to fit it with 40R tires,but i dont want to downsize the tire. is it right to increase size of the rim? any suggestion? thanks!
im just trying to see how much i can do , and spacers i herd can ruin your suspension if raceing bc im about to auto cross in a 87 IROC-Z. frount rim 10 back is a 10.5 wide and hightis 17 f and back is 18
Please help me guys. I have a Toyota corolla 2005 and OEM rims for this car is 15x6.5 and bolt pattern is 5x100. I found the rims for my car but i don't know if this rims will fit I found rims 15x6.5 and have a 5 lugs but i don't know (seller doesn't know too) diameter maybe 100 maybe 114 and offset for my OEM rims is 45 but this rims have +36 offset will it fit for my car? P.S. New rims name is "Enkei ZNL Type 40"
Just use a damn string starting from the center of the hub. Cut the string every time it touches anything then take the final string length x2 and that's the tallest tire you can have.
What if my stock car tires are 225/50zr18 front and 245/45zr18 rear and I want to put 245/30R 18 tires on my stock wheels both front and rear would that be a problem?
I'm surprised with today's technology that you can just type in your tire size and get the wheel sizes aside from a 6-8 lug nut which is the easy part. But instead pull tires off whip out a tape measure. Seems like alot of work for a measurement. The whole measurement thing is confusing on a rim compared to a tire being put on the rim.
Hi yellownp22541, We have a lot of questions for you! Can you give our tech department a call? 1-330-630-0240.We look forward to your call. Thanks for watching!
JEG's tool is required for order Dodge 1978 B200 American Racing 15 inch Vicks Tire 6 th street Kingsville Texas 78363 220 E Ragland Ave Kingsville Texas 78363 catalog order
I have a 2016 Ford Explorer and want to go from the OEM 255/50R20 to a wider tire like 275/50R20 or something wider. What's the widest without having to change my wheel package. Will this work? Will this effect MPG or speedometer reading?
what is name of the tool that simulates the wheel and tire package?
67 mustang fastback would like to install 8.5 15 inch wheel at 3.75 backspace on rear,with 245/60s will it work/?
Thank you for the great video, I know I have found the place that will have some answers for me.
I 've a 1989 Toyota Celica which came with 13" tires, which seemed to have disapperared from the face of the earth, so what wheel package can I upgrade to, keep in mind I have the famous 4X100 bolt pattern. Second how much will the upgrade cost and what is the availability of it. Are deep dish wheels a thing of the past as well? Thank you once again.
Hi, just wanna ask whats the best tire size to a lowered 1.5inch drop for an 18inch rims to a 2007 honda civic coupe? Which is not rubbing the fenders at front. Thanks
I would like to thank you for the video. I have 2016 Honda Accord Coupe. I have aftermarket wheels ( 18×8 38 offset with a 245 40 18 tire). I'm going to use H&R springs which will be a 1.3 drop. I want to know is a 225 45 18 tire ok to run on a 18x8 wheel? Thank you.
67 mustang fastback ,looking for the old school deep dish look,15,x8.5,3.75 back space,american racing wheel,245 60 15s on back,hope it works with out cutting the rear to fit!!! help!!
I wanna put 33/12.50/17 tires on my truck but dont want them too rub ... do I need a offset on them or will they still work as long as I still use a 17 inch rim or will it require a wider rim.thx
Hello thank you for info, unfortunately I've already put bigger Wheels on my car now they seem to be working out okay and driving fine but the back wheels seem to be tilted slightly in words at the top very very subtly but I've noticed it is this okay and safe? Thank you for your time
I have a 2011 Kia Sorento with 41mm offset, 17-7 rims, 235/65r/17.
I would like to replace the factory rims with a set of Lexus rims, offset 30mm, 18-8.
Both wheels have 5-115 bolt patterns. Can this be done?
Thanks.
Will tires 245/30zr20 97wxl hold the weight of my 2007 dodge magnum
Yes, you should be fine with those.
I have a Mercedes 2005 500 SL standard. My owners manual states that I can use to 255-40 R 18’s on front and rear wheels. Can I use to 255 -45R18’s also?
Iv'e got a 1977 Thunderbird that has the original wheels and hub caps. I was wanting to know how wide of a rim and tire that would fit without rubbing issues or throwing the speedometer off, staying with 15 in diameter but wanting the deep dish look with a classic slot, centerline or torque thrust wheel. Thanks, any info would be appreciated.
Daniel Young, Because you want to maintain the OE wheel diameter of 15 inch, you’ll have to keep using a 4 inch (factory) backspacing on the front for proper clearance to the tie rods and control arms. On the back though, get out the tape measure and measure from the face of the brake drum in to the first point of contact like a leaf spring, shock or frame rail. Subtract 1.5” for sidewall bulge on the tire and some clearance, and this will be the backspace measurement you can use on the rear. This approximate of course but will give you a starting point.
Summit Racing Thanks for the info!!!
Can I put 195/55R/15 tires and 15x6 wheels on a car that is made with 195/60R/14 stock tires and 14x5 steel wheels. Could I just take the 14" tires and wheel off of the car and slip the 15" tire and wheel on or would I need any other items to make it fit? Sorry I'm only 18 and still learning about cars.
+HATER TROLL ,
Can you give our tech department a call? We need some additional information from you. We look forward to your call! Thanks for watching! 1-330-630-0240.
Hi, I have a 65 Impala. What size of Rim would be considered and Width. I had in mind 20's in the rear, 18's in the front. open for suggestions, thanks!
+aurelio garcia,
We need some additional information from you. Can you give our tech line a call? 1-330-630-0240. Thanks for watching!
Hi there. I currently have 265 width and 22 inch rims on my lexus rx 330. I was wondering what the largest size I could fit on the rear without modification. I was willing to do some modification to accommodate 315-335 mm tires in the rear.
Please help
chillinxxpaki69,
Once you determine the tire brand that you will use, check their website for dimensions. Armed with that data and a tape measure, go out to the car and see just how much modification will be necessary and if you want to go that far. Most likely you will need to contact a body shop for the modifications!
Hey just asking if I wanted to put 17 inch rims which are 235/45/17 on my vs if that fit and be okay I'm on my P's and asking if I wouldn't get in trouble with them thanks heaps
Adam Hagen ,
We need some additional information from you. Can you give our tech line a call at 1-330-630-0240? We look forward to your call. Thanks for watching!
What the lugs bolt pattern for a Ford ranger 2002...I wanted to buy some new rims
hi. i have 2019 subaru wrx sti. i need wheel and tire for winter. please give me any idea
I am trying to add some 15x7 on my Silverado its an 01 but the caliper clearance is well ass cuz the caliper touches would anything happen if i grind down the caliper just for it to fit one side slides in but one side doesnt
What size rims can I put on a mc 1997 with out doin all that I don't want no lifters what's my Max stock or aftermarket
how much bigger can i go without loosing performance (acceleration, handling, breaking)
My question is
I have a 1994 mustang gt
With stock wheels and 4.10 gears
And I am looking for new rims/tires
I was looking at
255/40r17 front
275/35r17 rear
Or some people said
255/40r17 front
275/40 r17 rear
What do you suggest looks best and would work best?
Extra info
The car is a daily driven car
From texas
stock suspension for now
And what rims do you suggest with the car?
The color is teal and dark window tint
Budget doesnt matter for now
I'm looking into buying some aftermarket rims and tires for my truck I want the rims to be offset to give like a mud install effect probably a couple inches what would I need to get without using wheel spacers
+John Routin ,
Can you please give our tech department a call? 1-330-630-0240. We need some additional information from you. Thanks for watching!
I have a 1966 mustang gt coupe,what is the widest wheel I can put on the rear using a 14 in wheel? would like to go 10 in if possible.
jack dowell you might want to check out a mustang forum. I'm sure you'll be able to find the answer there. Good luck.
I drive a 2003 kia enterprise ceo and i have on them 225/45R18 am thinking of changing the tires to a 235/50R18 tires due to the bad road condition but i dont know if the car can handle that.
junior igie ,
We need some more information from you. Can you give our tech line a call? 1-330-630-0240. Thanks!
Hay show one for a nissan Altima 2010 2.5s actually fitting on camera
I want to retain my 255\65 r17 would tou tell me what exact rim will it fit thanks
Joseph Borja if your going to keep your 255/65r17, that tire size is for a 17inch wheel
can a 295/25/zr20 back wheels fit a 2000 mercedes e320, if not what can be done to make it fit, great vid by the way
+Pablo escobar,
The only way to know for absolute certainty is to measure both the wheel & the vehicle you would like to install the wheel onto.
i have lancer with 215/45R18 wheels. i want to fit it with 40R tires,but i dont want to downsize the tire. is it right to increase size of the rim? any suggestion? thanks!
Hi Edward,
We need some additional information from you. Can you please give our tech line a call? 1-330-630-0240. Thanks for watching!
im just trying to see how much i can do , and spacers i herd can ruin your suspension if raceing bc im about to auto cross in a 87 IROC-Z. frount rim 10 back is a 10.5 wide and hightis 17 f and back is 18
I have a question I have Dunlop 235/50R18 what size rims will fit please help
Hi Kerryann Dyer,
For a proper foot print Dunlop requires a rim width from 7 - 8 inches wide and an 18” diameter.
I have a 2010 Maxima, what size 19" & 20" can I buy???
+MELE MEL,
We need additional information from you. Can you please give our tech line a call? 1-330-630-0240. Thanks!
Please help me guys.
I have a Toyota corolla 2005 and OEM rims for this car is 15x6.5 and bolt pattern is 5x100.
I found the rims for my car but i don't know if this rims will fit
I found rims 15x6.5 and have a 5 lugs but i don't know (seller doesn't
know too) diameter maybe 100 maybe 114 and offset for my OEM rims is 45
but this rims have +36 offset
will it fit for my car?
P.S. New rims name is "Enkei ZNL Type 40"
Just use a damn string starting from the center of the hub. Cut the string every time it touches anything then take the final string length x2 and that's the tallest tire you can have.
7th gen accord size please advice
i have a toyota voxy wat best size of rim can i fix it to be cool?
+Tom Kabucho ,
Can you give our tech line a call? We need some additional information from you. 1-330-630-0240. Thanks!
I have spark car. Can. I use 155/70. Vs. 155/80. Witch. Is. Best
can I fit BMW rims on a 2006 Pontiacs
What if my stock car tires are 225/50zr18 front and 245/45zr18 rear and I want to put 245/30R 18 tires on my stock wheels both front and rear would that be a problem?
+YoungBossSteppa ,
We need some additional information from you. Can you please contact our tech line? 1-330-630-0240. Thanks!
W he tried fhb
the information was helpfull and interesting to know things that I didnt think was important
Thank you for watching!
Thanks for info I'm going to use procedure too bad customers still want them too Big. ✂️🔨🏋️ 😒
Rims are next on my 78 elcomino
Good luck with your Elco project Ricky with soo many wheels available its always a tough choice !
I'm surprised with today's technology that you can just type in your tire size and get the wheel sizes aside from a 6-8 lug nut which is the easy part. But instead pull tires off whip out a tape measure. Seems like alot of work for a measurement. The whole measurement thing is confusing on a rim compared to a tire being put on the rim.
Hi Ariel, We need some additional information from you. Can you give our tech department a call at 1-330-630-0240? Thanks for watching!
Hi yellownp22541,
We have a lot of questions for you! Can you give our tech department a call? 1-330-630-0240.We look forward to your call. Thanks for watching!
JEG's tool is required for order Dodge 1978 B200 American Racing 15 inch
Vicks Tire 6 th street Kingsville Texas 78363
220 E Ragland Ave Kingsville Texas 78363 catalog order
Stop saying Uhhhhm so much!
I have a 2016 Ford Explorer and want to go from the OEM 255/50R20 to a wider tire like 275/50R20 or something wider. What's the widest without having to change my wheel package. Will this work? Will this effect MPG or speedometer reading?