ARLEN NESS OIL PRESSURE GAUGE INSTALL VIDEO
Вставка
- Опубліковано 12 лип 2018
- Please watch: "ULTIMATE TINNY / BOAT BUILT. Episode 1. The Idea 💡"
• ULTIMATE CUSTOM BUILT ... -~-
Here is how to install an Arlen Ness oil pressure gauge on a 2016 Harley Davidson Dyna Wideglide
/ skidpig
skidpig.bigcartel.com
if you have too many stickers send them to:
SKIDPIG MOTO
PO BOX 779
DEERAGUN
QLD, 4818
AUSTRALIA - Авто та транспорт
Great vid man. I only laughed out loud when you dropped the second bolt because that's me EVERY time. Thanks for leaving that in so the rest of us feel normal.
🤣 no worries mate
That bike sounds pretty wicked. And thank you for the how-to video. I was curious where I would get the reading from. Glad to see I don't have to drill and tap anywhere.
I installed the same one on my 2011 Fatboy lo and it annoyed the heck out of me, my leg would press right up against it, except when cruising down the highway because I could move my right leg out. That thing gets hot hot! Once I got fed up with it I trimmed the bracket so could move it forward and it's perfect now!
Dude! Nice How-to vid. Can't wait to see the Fairing on that badboy!
The Alpha Corps I just finished editing that video bro!!! I will put it up early next week 🍻
My bike is a Wide Glide identical to yours aside from Big Radius exaust. The Big Radius made a huge difference. I had to loosen the front pipe and bracket in the back to give myself enough room to tighten up the sender unit with the oil pressure adapter. The top line was a bitch too but I got it just tight enough, used the hell out of pipe tape and loctite, and then used the little clamp provided to make sure the line isn't going anywhere. I'm praying it doesn't leak but as of right now I'm golden.
Great video mate. That gauge looks cool, nice install and your bar top looks sweet. ride safe. Cheers
RSB Harley cheers mate!! 🍻🍻
Looks good Bro same gauge im running on my bike. Nice install vid 👌👌 ohh like the shirt too 🤙
+Andrew Eade Reppin the SunCity HD 🤙
Awesome vid bro, after my oil pump went out on me I feel like I should get one of those. Just to know that my pressure is always good 🤙🏽🤙🏽🤙🏽
Jmac7o7 yeah mate, cheap price of mind!!
I started laughing the moment you started to put the longer bolts in! I did the same thing when I installed mine last year. LOL. But at least you had yer seat off, so it wasn’t a big deal...Nice vid!
Doug Ashby haha cheers mate 🍻
Definitely wanna do this to my CVO Ultra! I just don't trust the dummy lights! If the sending unit goes out, you really have no idea if you have oil pressure or not! Thanks Brother, ride safe!!
Hey Great Show O'Boy,
Happy to see ya enjoy a little JD Old #7, which is my favorite too.
I Never Drink and Ride at the same time friend..
I always pull over ta have a sort then Ride-ON.
Just Joking,,
Always Ride safe today so Ya can ride again tomorrow.
🍻
Awesome look. What pressure do you have when fully warm up on idle, and approx 2000 RPM?
Nice video & bike. The gauge looks sweet, but not a big fan of how the line runs across P/R , think it would look better with a longer line to tuck up by the tank or something ?? But good video brother. Oh & nice Blade!! Lol
hello I like the work. can I ask what he used for the threads ... could it be Teflon?
Great video mate! The bolts supplied with my kit won't go into the rockers 🤔
Brock Neilson oh really that sucks
They are nice gauges I have the same one but, you have to forget about pressure when the engine gets hot because the gauge is located 12” above the sending unit/engine, will give you a zero pressure while idling, though I had lost pressure and started freaking out
Love ya bike
Which pressure gauge did u use? I’m looking one digital for my fast Johnnie too
Nice work, damn destructions who needs them...lol (me...Shhh )
Your right, it doesn't look half bad. Compliments her a treat.
Glad it's you and not me, I dont know $#!+ mechanically.
Tfs 💋
Mtrcl Gypsy Lucky for video editing haha. I can make myself look heaps smarter 😂
Great video sir. Do you remember the size of the socket you used to remove the the pressure sensor?
No idea mate sorry
15/16. just did mine. better off building it backwards.
great job, can you please explain why the oil appears to have gone into the dial? Or is it a camera reflection?
To Stop the needle bouncing
its a oil filled gauge from the factory, its there to stabilize the needle,
Does it got in your legs way? I have my knee hitting the elbow if my heavy breather this seems like it's something else in the way I'm finally getting used to the heavy breather elbow.
Not at all, but my brother in law is shorter than me and it does annoy him. Im 6 foot 2
A1 cycles gauge easier and less fittings to leak cheaper too
Did your oil gauge ever start leaking? And is it still holding up?
Never leaked and still going strong mate
Mine leaks
Wow, us American guys are the same. What instructions?
🤙
Just Installed this Gauge on my Low Rider S. No oil pressure at Idle when hot. Is this Normal?
It does drop but not to no pressure
@@SkidPig That's not good then. I installed this Guage After I Installed An S&S 585 Cams ,Cam Chest and Oil pump. . Thanks for the Reply 👍
Bad boy, bad boy, bad boy...where ?
How about to assamble the oil gauge into front cylinder? Does anyone did that?
If the bolts line up, I don't see why not
Ya it would face the front of the bike though instead of facing to you on the seat.
Does it interfere with the Leg ?
No but I'm 6 foot 2
Fukin mint
cheers mate
Kinda of useful if you have two left hands..... but really, you did not mention once any toque specs whats so ever.... cant figure?
As tight as you can go with one finger is my rule
Nice vid....but please get some ratcheting spanners....ride safe m8
I've got some now 🤙
Are you from Montana ?
Australia
So ….. as an Australian Male that doesn't read directions, does this mean the wife, girlfriend or the wife's girlfriend reads them to you? I only ask, because I am finding many similarities with you "Professional Australians" and us Outback want-a-bees. Except of course, you folk are way more professional.
Nice looking oil gadget. I always figured the oil pressure was low, when everything locked up. This is probably a less expensive solution, huh?
HAHAHA nah mate its mainly because most of us can't read, we look for the pictures haha
I finally installed my one I’m stuck at the oil sender I got short shots on and I can’t get socket on it I don’t see having the room to fit the adapter it’s all so close to the header stock form
I JUST FITTED THE SAME TO ME FAT BOY LUVERLY JUBBLY 🤣🤣 FROM THE UK 🇬🇧
Sorry that's a horrible place, always having to open wide and look down!
Routing hose across motor is ugly.
I like the look
@@SkidPig I like the look of the instrument and its placement. I do not like the look of the hose and routing. Way better on 1340 EVO as I have this on my FXR and my FXSTS. It originates directly below the gauge placement on those bikes using metal line. Similar to brake line metal. Looks way better.
@@grabir01 yeah i work for pirtek and re routed mine back down the rear head under the frame and up the hose is fucking horris
Looks wrong 🤮
He is hopeless