Local gun store is selling them for around $180 and I'm admittedy tempted simply to have something unique to use as an occasional cheap range toy. Checked the serial numbers on the two pistols displayed on the store's website and sure enough, they're on the rubber bullets only list.
Yeah apparently Centerfire is also offering them for 185 with free shipping. That’s basically novelty gun prices along the lines of a Cobra derringer or something. I could understand it being tempting by that standard.
I bought one and so far it works fine. My serial number is before the ones on the list. I agree with you on what possibly happened. For under $200 its a great feeling and shooting pistol
I purchased mine here in Canada. Mine falls in the list of affected serial numbers. After reaching out to Tara EU, I received the same letter. Tara US is still to reply (6 months). 2000+ rounds in, couple of jams, but all good. I might just even try the Glock trigger spring mod to ease the workout my trigger finger gets. On a side note, as ex military and LEO, I have carried and shot far worse firearms than my Tara on a regular basis.
While I don’t have any military or police experience, as a collector/enthusiast I too have encountered many examples of worse build quality and reliability than I’ve seen with the TM9, including guns that wouldn’t run for anything straight out of box, and even one that broke within a couple hundred rounds. It’s not the worst gun on the planet but there are quite a few better alternatives for a comparable price, and from manufacturers more likely to stand behind their product.
I just broke mine in... you have too, I had several jams and I used 3 different metal casings. it seems mine like aluminun casing. after 100 rds I never had issues again. I don't know what the hell is the issue with these gun folks talking bad about this gun. it does have a long trigger pull but that's only the first pull. this is a WELL made gun for $185.... you can't beat the price!!
...I took the plunge and got one in mid-2022; have put about 600 rounds of different makes of "plain vanilla" 9MM thru it and have not had any problems with the exception of a number of "double taps" needed early on. Replaced the original striker spring with a Glock 5-pound one and yes, the trigger pull is not ideal, but it is a whole lot better now. Would I carry it as a self-defense gun? probably not, but for going to the range to "pop caps," it is kinda fun......
I tried fixing it but I think UA-cam doesn’t like linking to a gun manufacturer’s site. It will show up if one searches for something like “Tara affected serial numbers.”
www.tara-arms.com/pdf/tara-arms_tm9-gen-1-rubber-bullet-use-only.pdf Sorry I guess UA-cam didn’t appreciate a link in the description to a g^n mfg’s site.
any word from atlantic on these? i bought one thinking it eas another turkish glock clone, the gun is a turd but no catastrophe or seriously failures. centerfiresystems is selling them for 185 no tax free ship but at least they disclose the issues with them. id like to know what atlantic has to say
...I bought one from Atlantic about one year ago (it was listed as a "blemish") and had no idea whatsoever about this "rubber bullet" business....I have put about 600 rounds of various makes of 9MM thru it and except for the miserable trigger pull weight, have had no problems with it whatsoever...what is/are the dangers of this gun using regular ammo...? I can't find anything about what is supposed to happen if you use regular ammo through it..? I find Sellier & Bellot ammo to be the best through this gun......
@@leonardvarmette7986 I’m thinking it’s not that something bad is supposed to happen if you fire live ammunition, it’s more likely TARA’s way of absolving themselves of having to provide any sort of warranty coverage. It appears that there may be a high rate of parts breakages and/or reliability problems (though presumably some of these pistols do run all and hold up fine), and rather than fixing them, they washed their hands of them by claiming they didn’t intend for live ammo to fired through them.
I kind of find it fun having to do research on some of these mystery imports. Even if it takes some simple bubbasmithing, it is nice to experiment with different things.
@@hobofactory I completely understand what you’re saying and there’s a huge possibility that you could be right. With our current government restrictions on handguns I just don’t see how this one slipped through the cracks if it only designed shoots rubber bullets, and then to sell it in the US market to shoot real 9mm ammo. But our government is so screwed up right now it would not surprise me.
Bryco, Jenning Jimenez . Yes the teally are terrible .ive owned them all and i believe every one of thrm have the slide come off while shooting. 9mm. 380 and 22lr.. They are just junk
Wow. Probably the TM-9X to, eh? Reviewing a pistol you never saw or shot? LOL! Never had any problem? Then you find a "posting"? The only difference is the spring weight. That's all. Really. Well, that and all you can buy in Canada or US states restricted to 10 rounds and get damaged magazines that are not reliable. Dimpling is damaging. These pistols have been out so many years and yet some folks claim they have done "research"? In the end it is a range toy, but certainly not a Jimenez or Bryco pistol. You haven't had a problem with yours? So you post a review based on your internet "research"? I have both a TM-9 and TM-9X, none of what you are posting here is real, just what you read on the internet. They were cheap? LOL! So was the BB Techs BB6 ($250), and you can't touch one now for under $1, 000. At least you admit you could be wrong and you throw in speculation.
Lol you need to stop smoking crack before posting on my videos again… please. In the States we absolutely can have unmodified magazines with the full original capacity. In fact those are the only mags I have. Knocking the 2nd gen pistols is extremely reasonable considering the company won’t stand behind their product. In any case, it’s a generally shitty gun and only someone less than half a brain would defend it… which I figure is the reason for your post :)
@@hobofactory LOL! OK! My TM-9 and TM9X run great. I guess I just got lucky. What company standing behind what? The TM-9 was designed and released in like 2014. These pistols were and are clearance priced. I didn't expect any company to stand behind anything on the one I bought. If you don't know how to change a spring, I guess you are left hanging. In the States we can have nonmodified magazines? Wow, lying on the internet, for all to see. For all reading, it depends on what state you live in. Do you need a list of states with limited mag capacity? No, I suspect you know that was a fib on your part. No worries. Carry on. Some people just need to talk so bad they make videos. Keep going on that internet "research". LOL!
@@FernandoChaves either you’re lucky or lying, I guess. That or you don’t shoot much. The manufacturer literally claims on their official website that you’re not supposed fire TM9 pistols with anything other than rubber bullets or blanks… I can’t think of any manufacturers, even the really bad ones (like Bryco or Jimenez), that have so little confidence in their product. It’s not just springs that break, but Tara is so bad about standing by their products they won’t even respond to requests for spare parts from people who need them, emails go unanswered, etc, even if you’re willing/able to do the work yourself, and willing to pay for the parts you need… so unless it’s one of only a couple springs that happen to interchange with Glock that you’ll have to buy on your own dime, you’re out of luck. They’re happy to screw you (and you seem to like it). I’m not sure why you’re insisting I lied about magazine capacity when you’re the only one who’s said anything obviously false here. You claimed we can only get 10-rd mags in the states, when it’s clear we can get full capacity ones. You can literally order them from Centerfire Systems right now. They have them in stock, like new, unmodified. I have like 5 of them. Sure there’s a handful of idiotic cases like California, but by and large, in the majority of the US, full capacity mags are completely available. I’m not sure why you’re simping so hard for this generally lousy pistol.
@@hobofactory I know all about what the web site says. And I have actually communicated with the engineers, and I know who designed it. I have all the spring rates and specs for both versions of the pistol available in the US. You are certainly having a hard time understanding what is going on here. That is certain. No worries. Keep searching the internet. You can't afford 10 bucks for a spring or understand spring rates. Cool. I get that. Stick to the brand names. Seriously. "by and large, in the majority of the US, full capacity mags are completely available" LOL! Yeah. Screw the rest I guess. Screw the 2A I guess. Believe whatever the internet says. Have a great time with that.
@@FernandoChaves you’re going to make me crack a rib if you keep making me laugh so hard. Spring rates? Lol, what?That’s all you have left? It doesn’t sound like you understand how shoelaces work, much less spring rates, but do go on. I can’t afford a $10 spring but can afford the H&K shown in this video?.. and routinely have videos on a variety of $1000+ guns? Your grasp on logic is as tenuous as it is on reality. Again, you’re the one who claimed full capacity mags aren’t even available in the states all.
Local gun store is selling them for around $180 and I'm admittedy tempted simply to have something unique to use as an occasional cheap range toy. Checked the serial numbers on the two pistols displayed on the store's website and sure enough, they're on the rubber bullets only list.
Yeah apparently Centerfire is also offering them for 185 with free shipping. That’s basically novelty gun prices along the lines of a Cobra derringer or something. I could understand it being tempting by that standard.
I bought one and so far it works fine.
My serial number is before the ones on the list.
I agree with you on what possibly happened.
For under $200 its a great feeling and shooting pistol
Glad to hear it!
I purchased mine here in Canada. Mine falls in the list of affected serial numbers. After reaching out to Tara EU, I received the same letter. Tara US is still to reply (6 months).
2000+ rounds in, couple of jams, but all good. I might just even try the Glock trigger spring mod to ease the workout my trigger finger gets.
On a side note, as ex military and LEO, I have carried and shot far worse firearms than my Tara on a regular basis.
While I don’t have any military or police experience, as a collector/enthusiast I too have encountered many examples of worse build quality and reliability than I’ve seen with the TM9, including guns that wouldn’t run for anything straight out of box, and even one that broke within a couple hundred rounds. It’s not the worst gun on the planet but there are quite a few better alternatives for a comparable price, and from manufacturers more likely to stand behind their product.
I just broke mine in... you have too, I had several jams and I used 3 different metal casings. it seems mine like aluminun casing. after 100 rds I never had issues again. I don't know what the hell
is the issue with these gun folks talking bad about this gun. it does have a long trigger pull but that's only the first pull. this is a WELL made gun for $185.... you can't beat the price!!
...I took the plunge and got one in mid-2022; have put about 600 rounds of different makes of "plain vanilla" 9MM thru it and have not had any problems with the exception of a number of "double taps" needed early on. Replaced the original striker spring with a Glock 5-pound one and yes, the trigger pull is not ideal, but it is a whole lot better now. Would I carry it as a self-defense gun? probably not, but for going to the range to "pop caps," it is kinda fun......
They selling for 185 now. I was thinking about picking one up.
In a way it’s not surprising that prices have fallen that low since there’s quite a bit of competition at the ~250 range.
Wow glad I watched this. I have one of these pistols and have out around 100 rounds through it. I'll be checking the list.
It would be cool to have a pre production experimental handgun, but it's obvious that they are just wanting to get that thorn out of their side.
link in description is not right
I tried fixing it but I think UA-cam doesn’t like linking to a gun manufacturer’s site. It will show up if one searches for something like “Tara affected serial numbers.”
whats the full link to the affected serial number spreadsheet
www.tara-arms.com/pdf/tara-arms_tm9-gen-1-rubber-bullet-use-only.pdf
Sorry I guess UA-cam didn’t appreciate a link in the description to a g^n mfg’s site.
Hi dear ,plz advice me about do tara tm9 first jen is a dependable weapon for self defense and cancel carry. Thanks
What would you guess, based on the info presented here?
any word from atlantic on these? i bought one thinking it eas another turkish glock clone, the gun is a turd but no catastrophe or seriously failures. centerfiresystems is selling them for 185 no tax free ship but at least they disclose the issues with them. id like to know what atlantic has to say
Tbh I haven’t reached out to them as of yet; I’ve leaned more towards just keeping it, I guess.
...I bought one from Atlantic about one year ago (it was listed as a "blemish") and had no idea whatsoever about this "rubber bullet" business....I have put about 600 rounds of various makes of 9MM thru it and except for the miserable trigger pull weight, have had no problems with it whatsoever...what is/are the dangers of this gun using regular ammo...? I can't find anything about what is supposed to happen if you use regular ammo through it..? I find Sellier & Bellot ammo to be the best through this gun......
@@leonardvarmette7986 I’m thinking it’s not that something bad is supposed to happen if you fire live ammunition, it’s more likely TARA’s way of absolving themselves of having to provide any sort of warranty coverage. It appears that there may be a high rate of parts breakages and/or reliability problems (though presumably some of these pistols do run all and hold up fine), and rather than fixing them, they washed their hands of them by claiming they didn’t intend for live ammo to fired through them.
They weren't experimental guns ..its a scam .. Look at forgotten weapons he did vid about this few weeks ago
What do you expect from the guy in the shadows selling weapons lol ..the guy in the movie WAR DOGs lol
I'm not kidding either ..its the guy in the movie who was the original guy who started B&T..
I kind of find it fun having to do research on some of these mystery imports. Even if it takes some simple bubbasmithing, it is nice to experiment with different things.
Yeah I tend to be drawn to weird/novelty stuff, especially with shady back stories.
I think you meant HK, not H and K.
But is the manufacturer called Heckler Koch or Heckler & Koch?
watch forgotten weapons...ian did an episode on the tara.
some of these have got over 100,000 rounds with no issues
Proof or it didn’t happen.
Watch item on forgotten weapons
I almost bought one, so I stopped and researched first for reviews
Sounds like you dodged a (rubber) bullet!
these are a lot better than the jimenez...
Will you find a warning on the Jimenez site telling you not to fire their pistols with live ammo?
I think you overstepped it a little considering US regulations. Just saying.
I’m certainly open to being corrected. Which US regulations would apply?
@@hobofactory I completely understand what you’re saying and there’s a huge possibility that you could be right. With our current government restrictions on handguns I just don’t see how this one slipped through the cracks if it only designed shoots rubber bullets, and then to sell it in the US market to shoot real 9mm ammo. But our government is so screwed up right now it would not surprise me.
Bryco, Jenning Jimenez . Yes the teally are terrible .ive owned them all and i believe every one of thrm have the slide come off while shooting. 9mm. 380 and 22lr..
They are just junk
just saying.....
Ooook. 😂
TP-9 Canik, reject bad pistols, get cheap good turkish pistol.
Yeah there’s a ton of really good pistols out there for not a lot of money, I’ve heard good things about Canik.
Wow. Probably the TM-9X to, eh? Reviewing a pistol you never saw or shot? LOL! Never had any problem? Then you find a "posting"? The only difference is the spring weight. That's all. Really. Well, that and all you can buy in Canada or US states restricted to 10 rounds and get damaged magazines that are not reliable. Dimpling is damaging. These pistols have been out so many years and yet some folks claim they have done "research"? In the end it is a range toy, but certainly not a Jimenez or Bryco pistol. You haven't had a problem with yours? So you post a review based on your internet "research"? I have both a TM-9 and TM-9X, none of what you are posting here is real, just what you read on the internet. They were cheap? LOL! So was the BB Techs BB6 ($250), and you can't touch one now for under $1, 000. At least you admit you could be wrong and you throw in speculation.
Lol you need to stop smoking crack before posting on my videos again… please. In the States we absolutely can have unmodified magazines with the full original capacity. In fact those are the only mags I have. Knocking the 2nd gen pistols is extremely reasonable considering the company won’t stand behind their product. In any case, it’s a generally shitty gun and only someone less than half a brain would defend it… which I figure is the reason for your post :)
@@hobofactory LOL! OK! My TM-9 and TM9X run great. I guess I just got lucky. What company standing behind what? The TM-9 was designed and released in like 2014. These pistols were and are clearance priced. I didn't expect any company to stand behind anything on the one I bought. If you don't know how to change a spring, I guess you are left hanging. In the States we can have nonmodified magazines? Wow, lying on the internet, for all to see. For all reading, it depends on what state you live in. Do you need a list of states with limited mag capacity? No, I suspect you know that was a fib on your part. No worries. Carry on. Some people just need to talk so bad they make videos. Keep going on that internet "research". LOL!
@@FernandoChaves either you’re lucky or lying, I guess. That or you don’t shoot much. The manufacturer literally claims on their official website that you’re not supposed fire TM9 pistols with anything other than rubber bullets or blanks… I can’t think of any manufacturers, even the really bad ones (like Bryco or Jimenez), that have so little confidence in their product. It’s not just springs that break, but Tara is so bad about standing by their products they won’t even respond to requests for spare parts from people who need them, emails go unanswered, etc, even if you’re willing/able to do the work yourself, and willing to pay for the parts you need… so unless it’s one of only a couple springs that happen to interchange with Glock that you’ll have to buy on your own dime, you’re out of luck. They’re happy to screw you (and you seem to like it). I’m not sure why you’re insisting I lied about magazine capacity when you’re the only one who’s said anything obviously false here. You claimed we can only get 10-rd mags in the states, when it’s clear we can get full capacity ones. You can literally order them from Centerfire Systems right now. They have them in stock, like new, unmodified. I have like 5 of them. Sure there’s a handful of idiotic cases like California, but by and large, in the majority of the US, full capacity mags are completely available. I’m not sure why you’re simping so hard for this generally lousy pistol.
@@hobofactory I know all about what the web site says. And I have actually communicated with the engineers, and I know who designed it. I have all the spring rates and specs for both versions of the pistol available in the US. You are certainly having a hard time understanding what is going on here. That is certain. No worries. Keep searching the internet. You can't afford 10 bucks for a spring or understand spring rates. Cool. I get that. Stick to the brand names. Seriously. "by and large, in the majority of the US, full capacity mags are completely available" LOL! Yeah. Screw the rest I guess. Screw the 2A I guess. Believe whatever the internet says. Have a great time with that.
@@FernandoChaves you’re going to make me crack a rib if you keep making me laugh so hard. Spring rates? Lol, what?That’s all you have left? It doesn’t sound like you understand how shoelaces work, much less spring rates, but do go on. I can’t afford a $10 spring but can afford the H&K shown in this video?.. and routinely have videos on a variety of $1000+ guns? Your grasp on logic is as tenuous as it is on reality. Again, you’re the one who claimed full capacity mags aren’t even available in the states all.
please stop talking something you don't know anything about, get the facts first.
You first :)