Thank you for demonstrating the patch creation process. I now need to figure how to create a patch(s) that matche Michael Schenkers sound from his UFO period and early MSG days. Thank you again.
The Recti ORG model sounds like absolute garbage in this video, and I thought the same too when I selected it on my own G14, but I suspect you may not have turned the mic ON in the cabinet settings, as I had found out while exploring the sounds. I did that and it sounded somewhat okay, but still not that fantastic. The Diezel amp model is the better high gain model in this particular zoom multi fx.
I would have one question about the expression pedal that controls the volume. If you set it let say in the half of its way it gives you 50% of preset volume. But if you change the preset without moving the pedal, this another preset turns on with 100% loudness until you touch the pedal and move it slightly. Is it possible to change it somehow? I mean when the pedal is i.e. totally raised so every preset that I switch on will be with 0% loudness.
I got this multiFX pedal primarily for the looper and expression pedal since it’s an “all in one”. I’m playing from a Roland MicroCube and while I’ve owned many Zoom products in the past, I must confess I’m not too happy with the quality of sound and ease of use. So many amp heads and cabinets and all the drive/distortion settings all sound like garbage compared to the distortion that comes built into my amp. What can I do to get it to sound better/more natural? I want to use the looper and drum machine but not with it sounding like it does.
@@LuizLuiz1006 you need to use an audio interface for best results. Recording software (DAW) like Garageband, Logic or Protools if using mac or Windows Fl Studio, Presonus, Reaper, Ableton just to give some examples. Good luck and hope you are enjoying your Zoom pedal.
hola disculpa como puedo apagar y encender el pedal de wah, volumen. etc con el boton que se encuentra debajo de este ? lo apreto con fuerzas y no llego a presionarlo
Hi zoom I own one of these pedals and my screen got stomped instead of the buttons, dumb I know lol. As the screen is now just black is there a way of getting it repaired or a replacement screen. And finally is there a chance that I could still use it connected to my laptop?. Any feedback will be much appreciated thanks… btw great demo 🤘
use a usb cable to connect ot the laptop. Use zoom guitar lab software to control literally everything from your laptop.. works like a charm. alternatively you can try tonelib zoom software to do the exact same.The ui is a bit better there.
@@ekhwanislam5659 oh yeah secondly is it jus a generic usb for say like a kindle or smartphone? As if so I don’t need to buy one lol . Sorry to pester and thanks again buddy 🤘
@@l3yfajamz yeah just a generic one, micro USB. The one you used to see on pretty much every smartphone before USB C became so widespread. I'm using my old phone charger cable lmao
@@ekhwanislam5659 awesome good to know, I’ve still a few of those cables left since moving on to iPhone. Thanks buddy really appreciate your reply. Rock on 🤘
Why is there not a single video or forum post explaining how to share and apply other people's patches onto the G1Four??? I've come across so many comments saying ''just youtube it bro...'' as if this was the best selling multi-effect of all time and yet still not a single video on how to use the dumb .zptc format. I'm thinking of refunding the pedal and buying something a little more high quality.
When I was a child, my mother bought me the Zoom G2 and I'm very excited from this, it has developed so good, maybe I will buy this.
Thank you for demonstrating the patch creation process. I now need to figure how to create a patch(s) that matche Michael Schenkers sound from his UFO period and early MSG days. Thank you again.
You forgot to mention you must turn the mic on for the amp cabinet and how to save the entire project to the slot.
sao muito burros
Great video, thanks.
How to activate the cubasis le program?
The Recti ORG model sounds like absolute garbage in this video, and I thought the same too when I selected it on my own G14, but I suspect you may not have turned the mic ON in the cabinet settings, as I had found out while exploring the sounds. I did that and it sounded somewhat okay, but still not that fantastic.
The Diezel amp model is the better high gain model in this particular zoom multi fx.
I would have one question about the expression pedal that controls the volume. If you set it let say in the half of its way it gives you 50% of preset volume. But if you change the preset without moving the pedal, this another preset turns on with 100% loudness until you touch the pedal and move it slightly. Is it possible to change it somehow? I mean when the pedal is i.e. totally raised so every preset that I switch on will be with 0% loudness.
Hey Zoom, could you pls tell how much impendance headphones can I connect to this processor? Can it run 250 ohms headphones? 60?
Can you advice me for clarinet, how can I create a patch
Please turn the mic of the speaker on!!! Did you hear the sound?
Which patch makes me play like you in this video?
music theory
Aydan Neilson-Bourke where can I find that patch, I seem to not have it
Bruh😂
Patch 5
That was my only complaint when I bought it too 😂
For some reason when I ad certain pedals it gets really loud and has tons of feedback.
Спасибо, то что искал
How do I get it to save
When you find the effect you want for your patch how do you select it.
Just stop on it.
How do you save the patch?
I got this multiFX pedal primarily for the looper and expression pedal since it’s an “all in one”. I’m playing from a Roland MicroCube and while I’ve owned many Zoom products in the past, I must confess I’m not too happy with the quality of sound and ease of use. So many amp heads and cabinets and all the drive/distortion settings all sound like garbage compared to the distortion that comes built into my amp. What can I do to get it to sound better/more natural? I want to use the looper and drum machine but not with it sounding like it does.
Activate the microphone in the cab sim.
TRANS POSE g1 fourمرحبا كيف يمكنني عمل
I have a question, I believe this pedal has stereo output, how do you feed the stereo signal for recording direct?
The output jack is stereo. Also you can output over usb
@@Docksidestudio1 How can you output via USB?
@@LuizLuiz1006 plug it into a computer for recording
@@Docksidestudio1 sure, but which recording software to use? Do I need any external interface or just Plug and Play?
@@LuizLuiz1006 you need to use an audio interface for best results. Recording software (DAW) like Garageband, Logic or Protools if using mac or Windows Fl Studio, Presonus, Reaper, Ableton just to give some examples. Good luck and hope you are enjoying your Zoom pedal.
What is level for?
hola disculpa como puedo apagar y encender el pedal de wah, volumen. etc con el boton que se encuentra debajo de este ? lo apreto con fuerzas y no llego a presionarlo
you had to use a muffed tone.
👍👍👍💯💯💯
Hi zoom I own one of these pedals and my screen got stomped instead of the buttons, dumb I know lol. As the screen is now just black is there a way of getting it repaired or a replacement screen. And finally is there a chance that I could still use it connected to my laptop?. Any feedback will be much appreciated thanks… btw great demo 🤘
use a usb cable to connect ot the laptop. Use zoom guitar lab software to control literally everything from your laptop.. works like a charm.
alternatively you can try tonelib zoom software to do the exact same.The ui is a bit better there.
@@ekhwanislam5659 nice one buddy ,great news that is👍. I going ordering the cable now I know it will work . Thank you matey 🤘
@@ekhwanislam5659 oh yeah secondly is it jus a generic usb for say like a kindle or smartphone? As if so I don’t need to buy one lol . Sorry to pester and thanks again buddy 🤘
@@l3yfajamz yeah just a generic one, micro USB. The one you used to see on pretty much every smartphone before USB C became so widespread.
I'm using my old phone charger cable lmao
@@ekhwanislam5659 awesome good to know, I’ve still a few of those cables left since moving on to iPhone. Thanks buddy really appreciate your reply. Rock on 🤘
Why is there not a single video or forum post explaining how to share and apply other people's patches onto the G1Four??? I've come across so many comments saying ''just youtube it bro...'' as if this was the best selling multi-effect of all time and yet still not a single video on how to use the dumb .zptc format. I'm thinking of refunding the pedal and buying something a little more high quality.
So complicated 😢
I went through the whole video and you didn't show how to save, 4 mins of my life lost ffs do it properly