So You Want a Matte Finish? | Custom Matte Air Jordan 1 Fearless | Angelus Paint
Вставка
- Опубліковано 26 лип 2024
- Here at Angelus, we get asked a lot about the difference between our finishers. In this tutorial, @jsm801customs breaks down each one and explains why some may have such a difficult time getting that proper matte look.
To go a step further, we allowed him to work his magic on a pair of Air Jordan 1 Fearless. He had no problem giving the glossy patent leather a new flat finish. Check it out for yourself!
Thanks for watching and if you have any questions feel free to let us know and don't forget to LIKE and SUBSCRIBE!
0:00 - Intro
0:25 - Angelus Finishers
0:43 - Matte Finisher
1:44 - High Gloss
2:25 - Satin
2:48 - Normal 600
3:19 - Let's get into the Custom
3:26 - Deglazing the Fearless 1's
5:28 - Adding Adhesion Promoter
6:00 - Matte Out the Fearless 1's
7:43 - Finishing Touches
8:12 - Final Product
Follow the Customizer:
Instagram - / jsm_801_customs
UA-cam - / jsm801customs
Materials Used:
- Angelus Acrylic Finishers
- Grex Genesis Air Brush Combo
- Angelus Paint Brush Set
- Leather Preparer and Deglazer
- BullDog Adhesion Promoter
Website: www.AngelusBrand.com
Subscribe to our UA-cam channel: / angelusbrand
Like Us on Facebook: bit.ly/2CgyiYR
Follow us on Instagram: / angelusshoepolish
Shop online: www.AngelusDirect.com/
Email us: Info@angelusshoepolish.com
Find us at your local retailer: angelusshoepolish.com/pages/w...
#angelustutorials #angeluspaint #customshoes - Навчання та стиль
Comment below and let us know what kind of custom you would like to see next!
Custom Gucci off white Adidas Ultra Boost 3.0 its a challenge because its cloth but it will be good to open peoples shoe customising game
Spencers Bike Hacks your gay
Hello, have you wanted to buy your paintings for a while, do you sell them in Costa Rica? Please answer me
What kind of finisher would be used for the midsole of some Nike Airmax plus shoes? I have a few pairs that I want to restore, well the white part on the midsoles bc they are turning yellow? Any suggestions? These are the steps I was told to follow:
Apply prep -blow dry
Apply white paint -blow dry
Use finisher let dry
@@andrewsegura3078 This always depends on you. Whether you are looking for a low or high shine. Check them out here: angelusdirect.com/apps/help-center#what-is-the-difference-between-each-acrylic-finisher
Those are the proper steps as well!
really pleased with JSM's breakdown of the steps - like how long the finisher should sit before applying heat, and why. "here's how u do it" > "look at what i can do"
I bet a lot of people would love to see the fearless 1 turned into a patent leather Chicago 1
Sneaker Closet someone did it on Ig
They made patent leather Chicago 1s back in 2003
@@grahamgust those were mids I believe
@@vile8413 this is old, but the 2003 Chicago’s are highs it’s just that the AJ1 was cut very strangely during that time period, making them look like today’s mids
Make all the customs with your paints, thanks for giving info on how to make better customs!
Love your channel because of you guys i have gotten inspired
Thanks for watching!
These look so much better with the matte finish! Lowkey wanna buy a pair just to get this look
Thank you so much for showing how different each finish looks from one another,that was very useful.
Glad it was helpful!
GREAT JOB BRO! Just gave me a brilliant IDEA....
Woooooooowww!!!!!!, amazing!,👍❤
Great Job 👍
I may have to try this
Thank you!!!!
Damn that looks good, I got rid of my pair because the leather was too shiny, wish I had seen this video first
very helpful! those look way better with a matte finish.
Very nice custom
I'm astonished on how good it turned out. Good work by JSM
Excellent tip about using light coats for the Matte
Glad it was helpful!
I see you bro 💪🏾
DOPE!
Matte finisher is the best!
🔥
I don't even wear sneakers and I found this video so satisfying.
oh wow never really thought this was possible
New content..💪💪💪
Nice
I would like to see some redwing 10877 brought back to their original color with your products.
If I apply any of the finishers to a midsole do I still have to apply krylon matte spray after?
Anyone know how to remove oxidation from Jordan 1 uppers? I want to do it without repainting them if possible.
10 times better!
DOPE
I hate patten leather. This looks great!
Quick question. I have an old pair of these and they have some scratches and creasing on the patent leather. Will this affect the matte finish?
Sorry meant to say off white mca blue many thanks 👌👌👌👌
quck question can you use the blow dryer to fully dry the finishers?
Try mixing in duller with the Matt finisher
If I customize my Air Force 1. Do I have to choose exactly one of those 4
I recently ordered the satin and it has crystal like objects im assuming its bad?
How do you get the sticky feel out of the finish? Thank you!
For reference, I did the angelus deglazer, paintable repair filler, black paint, and two coats of matte finisher, blown dry with a dyson dryer on high heat. I let everything site for 2 days each in between products. Thank you in advance!
Hey there! Sorry that you are having that issue. The paint underneath may have not been cured prior to applying the finisher. If this is not real leather, that can also affect the outcome. The tackiness should go away soon. It is not really something you can remedy after the fact. For further assistance, please shoot us an email at info@angelusdirect.com and we will do our best to help you!
Those came out fuckin' raw!!!
Got the man, the myth, the matte king in the building
how many layers of finisher for it to be as durable as the original finish... cause i find if you prep and repaint and ad finisher the colour has an easier time coming off than original... and i count on customising my leather motorcycle suit
Bonjour,
J'ai utilisé le vernis finisher mais après une semaine d'utilisation de la chaussure le vernis se décolle..
J'ai bien préparé, J'ai bien secoué, j'ai mis deux couches et laissé séché 2 jours. Il n'était pas collant ma chaussure a été plié derrière et le vernis ce décolle. Merci de votre aide
Can you put angelus finisher on mesh or canvas to protect the angelus paint I put on those areas ? Or do you not put any sort of protection on canvas or mesh materials after you’ve painted on them with angelus paints ?
Finisher is optional and provides minor protection. It's mostly used to get leather a certain sheen. If you are using 2-Soft with the paints, applying light coats and heat setting then the paint will be durable and last the life of the fabric material.
Another option for protection is our Water and Stain Repellent.
angelusdirect.com/products/water-stain-repellent?_pos=1&_sid=49a2407fd&_ss=r
Thinking about doing this but really want to know how this holds up. Does the shine from the patent leather come through over time? Or is that shine literally removed in this process. Answer to this question would be greatly appreciated!
If you were to use the Matte Acrylic Finisher over patent leather, it will remove the shine from the shoe!
Could you make a video on how to clean the airbrush machine after using paint or finishers? I know you don’t own the brand but I see it on angelus related videos the most.
Good idea. We will add that to our notes. 🙌 Thanks for the feedback
I need help! How do I use heat gun to dry the paint? What type of watt heat gun should I get and at what temperature should I use when drying angelus paint? Pls advice thanks
We recommend this heat gun or something similar. To dry paint after each coat, use a the lowest setting until the paint is dry to the touch. Keep it 6-12 inches away from the shoe and keep it moving back and forth. If you have any more question then let us know.
angelusdirect.com/products/heat-gun?_pos=1&_sid=b5f097834&_ss=r
so I have applied matte finisher to angelus red and flat black paint (I applied a lot of the finisher at once with paint brush), and the result was that it looks quite glossy, and Im just wondering whether I should go over it again with the finisher but with lighter coats and heat? Is overlaying finisher bad for the paint and the shoe?
Hi Jason Li, regardless if it's paint or finisher, you should always apply multiple light coats and never add a lot all at once. Stated in the video, he highly suggests the to shake the matte finisher extremely well, apply very light coats using a airbrush and then hit immediately with heat. If you can, remove the layer of finisher with our Leather Preparer and start the finisher process over but if this is going to compromise the paint then you may have to live with it. You can try to add another coat but piling up the coats may effect the durability. Experiment on smaller inconspicuous areas and see what works best for you.
Just curious how is it washing shoes after doing a custom paint job on them and using the satin finish? I wanna customize something Jordan 1 cleats but I don’t wanna do it if when I need to wash them the paint comes off or something like that
It's all about the prep. Just make sure to properly prep the shoe before painting. For cleats, do some light sanding, our Leather Prep and possibly some adhesion promoter to allow the paint to adhere and be extra durable. Clean and washing the shoes should never be a problem if the sneakers or cleats have been properly prepped.
do you have to airbrush matte finish or can you do it with a brush?
You can do it with a sponge, brush or whatever you want. It is just important that you don’t rub it very aggressively.
Hi, If patent leather become sticky, what Angelus product do I need, and how to do it , really need this information , thank you !
Angelus deglazer
ive used black paint, and it has a really strong shine to it, I've used nail polish remover to try dull it down and it worked! is this a good idea?
Hey there!
We recommend to use our Flat Black paint if you want no gloss, or you can use our Duller product to mix in with the paints to take out the shine. Nail polish remover will begin to take out the color you applied, if you use too much you will end up making the surface sticky
pls do this on patent leather bred 1 coming before new yr
Definitely will try on that one.
@@AngelusBrand pls pls
What do I need to make sure the leather dye does not come off on damp clothes, in short waterproof?
Can the acrylic finisher be used as paint protection besides just adding gloss or making it matte?
Yes absolutely, but please note, all our paints have a bit of finisher in it already.
Here before 10 I⬇
Finishing up my first pair of customs using your brand and it’s turning out great, how long would you recommend letting the shoes sit before applying matte finisher?
We usually recommend at least 48 hours.
How much time should wait since finishing panting and aplying the finisher? I did some and the paint cracked after few days
You may apply the finisher as soon as the paint is fully dry to the touch. We might recommend to let it cure for a little bit longer but as long as the paint is dry then it should be good. Also, the paint cracking has nothing to do with the finisher. The finisher is optional and works as a top coat which gives the surface a sheen. The most important step is to prep the leather before applying the paint. When prepping the area, we suggest using our Angelus Deglazer or Acetone to remove the factory paint/finish. This will allow Angelus paint to adhere better to the surface to avoid cracking. If you have any more questions feel free to contact us at Info@angelusshoepolish.com
oh shit, my boy
So on my forces should I use matte? Or is there a certain finish you recommend for air forces
That will be up to you on what type of sheen you would like. We offer matte being our lowest shine out of all of them. Please note, all our paints have finisher in it already. Acrylic Finisher is used after your project is completed and you are ready to seal them off. Using the Acrylic Finisher is totally optional and is dependant upon personal preference.
What finisher would you recommend for the white part on black cement 3s?
Either Matte or Satin. Adding Finisher is strictly preference however the most popular would have to be Matte.
I couldn’t help but notice you have clear nail polish on lol
I’m thinking about buying the matte finisher to repaint some midsoles, i used to just use the flat black paint but the paint still fades off (not cracking like jordans) from day to day use, will the finisher actually seal and protect the paint or is it just for finishing purposes?
This will depend on the midsoles you are repainting. Please email us at info@angelusdirect.com so that we can offer information more in depth for you!
proper
How do you compare matte finish vs duller and what are the cans and can't do for both of them?
Matte Finisher comes with the flat look which goes over the project once you are done painting. With the Duller, it is added to the paint or finisher to give the flat look. With the duller, be careful to not add too much... this can compromise the durability of the the paint. If you have any more questions feel free to contact us at Info@angelusshoepolish.com
Hi, i custom my shoe jordan 1 mid last month. And i paint the toe part into white but after i used the shoe a lot of cracks are starting to show. What do i put to prevent it?
There could be a few issues when it comes to issues like this. From the examples shown it looks like it is 1 of the 3 mentioned below.
1. The preparation was not done properly
2. The layers in between each coat were not properly dry enough. 30-45 min dry times in between each coat. 15-20 min if using a heat gun or blow dryer.
3. The final coat was not completely cured long enough before worn. After the final coat you want to let it dry for at least 48-72 hours.
It can be either one of those or all of them.
What I always suggest is giving the leather a light sanding. Especially in those areas where you will experience creasing. Which comes with wear and tear of course. Ultimately, if the preparation is done well, the dry times in between each coat.
When looking for a Matte Black finish, should I buy Black and the Matte Finisher or Flat Black and the Matte Finisher? Thanks in advance.
It's all user preference and seeing what works best for you and your project. The popular choice is likely to be Flat Black with the Matte Finisher.
Hi, if I don’t have heat gun, can I use hairdryer instead? Thank you!
You can! Make sure the hairdryer is on the highest heat setting.
I've got a pair of Jordan 6 Varsity red's that are damn near mint except for a crack in the red factory paint. Would it be safe to add an acrylic finisher on the factory paint on the midsole?
Yes, will you be repainting the midsole as well? email us at info@angelusdirect.com for more help with this shoe question.
Ngl, both to me are fire, gloss and matte. But damn that matte is fuckin cool
Bro, I have a question for you... I customized some AJ1s, I used Angelus paint in White Flat and Black Flat colors, I loved the final finish when they were ready, then I applied the Acrylic Matte Finisher that you use in the video with a brush, and it gave it a lot of shine on my AJ1... I didn't use a heat gun when applying it, is that why it didn't have a matte finish?
Sometimes if you don't mix the Matte enough, or shake really well, that can happen. Try our Matte 4-Coat, you may like that more.
Hey guys how many rounds should u coat the finisher? Cos I did a twice and it went terribly and the tacky ness won’t go away at all. Even after apply shoe wax to remove any tacky ness doesn’t work. So what’s the tips to apply the finisher? Thin coat first or use hair dryer would help? Please advice
Yes, ideally it takes 1-2 very light coats of finisher. Allow each coat to fully dry by using a blow dryer or heat gun. What shoe and surface are you working on? Did you paint the surface first? Was it prepped beforehand using acetone or our Leather Preparer and Deglazer?
When applying matte finisher should I apply 1 or 2 coats? And should it just be ever so slightly sticky after applying heat.
1-2 coats and the finished product shouldn't be sticky. Try giving it more time to dry. If its still sticky try adding a very light coat of finisher but this time add a drop of Duller.
If I add Duller to Satin (Matte out of stock) will it get close enough to Matte to be unnoticeable?
Yes, adding a drop or two of Duller to Satin will give a nice matte look.
Does the matte fininsh always needs to be used through an air brush only? Or can one just use a brush to apply the matte finisher?
It does not. Just seems to be easier for some.
sources to where he got the air brush? whats a good alternative air brush i can buy if you dont have the link? thank u please respond
you can go on amazon and just type in airbrush and find one in your price range to start off
Hi, I have Alphaedge 4D iridescent / Goodbye Gravity and it has the shiny glitter when the shoes contact directly with the light. can i use the angeleus matte to make the glitter doesn't reflective/shiny ? thank you.
Unfortunately not, the iridescent material will always reflect unless you paint over it. Our finisher will not make it reflect any less.
@@AngelusBrand do you have any solution to make my problem solved ?
Everytime I apply the Matte Finisher, the shoe is still shiny. I'm using a paintbrush so its tricky to use the heatgun after applying the Finisher. I added some Duller but the Finisher was still shiny. What would you recommend ? I also don't want to apply 4-6 coats of Finisher.
First off, did you happen to shake the bottle well before using it? You need to shake the bottle really, really well to mix up the dulling agent in the finisher. After that then only 1-2 light coats will be necessary.
@@AngelusBrand of course I shake the bottle before applying anything. After the 2 layers of finisher it isn't really matte at all. It's more like satin. I tried to mix more duller but it became chalky. I used matte finisher with duller and it was shiny. Then I tried the normal finisher I think type 604 with duller and of course it was shiny too. What can I do about that ?
@@itsjohn4824 same problem here. Looking forward to a solution.
@@itsjohn4824 Hi bro! Some news?
@@paulgeoroceanu until now, nothing. If i got some news, I'll let you know
Brilliant video as ever I would like to see how you're professionals do jordan wing's logo I'm customizing my J1 and struggling like hell I've messed up half a dozen time's 😂😂😂😂 also another 1 customising my off white mca 1s my fault lefttje top off my anjelus leather deglazer and it went on toe box and it's noticable what paint or mix I can get close any help would be appreciated 👍👍👍👍
For really small detail our man, Dejesus Customs uses a toothpick to paint. A small point like that can work well (ex. mechanical pencil, pen, toothpick...) and as far as the Off White MCA 1, you can try using our UNI Blue color as a starting point but you'll probably have to experiment with some colors in order to get the exact colorway.
ua-cam.com/video/UVAGYI-JnuE/v-deo.html
angelusdirect.com/products/collector-edition-uni-blue
@@AngelusBrand thank you yes was looking at that colour but what would you recommend colour's to mix with it heeeeeeelp 😂😂😂😂 seriously I need to knock myself out 100% 😂😂😂👍👍👍👍✌️✌️✌️✌️
David, it was my first time doing my custom J1 this past few days. I also struggled with the jordan wings logo. Messed up the last shoe until I saw a MAGNIFYING GLASS! Also use 0 round or 0 liner brush. It will do the trick. :)
So for my Bred 4 midsole repaint im buying flat black/white paints but do I need any duller I can add? Also what type of finisher? I cant get matte finisher but theyre offering normal, satin and high gloss for the kit. Maybe I could try duller with normal finisher?
Yep. Flat Black and Flat White on its on will be perfect. Personally, Satin may work well for the Bred 4 but if its a little too shinny for your taste then add a drop of Duller and apply another coat or two
@@AngelusBrand thanks appreciate it. How would normal compare to satin? Also would a different brand duller be fine because I already ordered no duller
Great job sir👍 God bless😊
Thanks for watching!
Is there any place I could send my Jordan's to get this done professionally?
I’ve been thinking the same thing. I don’t trust myself to do it. Afraid I’m going to ruin the shoe haha
Can i put the finisher on 1 week after putting the paint on ??
Yes you definitely can!
Please please do this one the new jordan 1 black and gold (the all patent leather ones)
Great idea 🙌
I think the toe box, side panel should be black with a white swoosh
i have the nike zoom spiridon cage 2 SE that i want to de-gloss
new subscriber here! Do I still need a matte finisher for the leather?
Any of the finishers are optional. It depends on the type of sheen you're looking for.
Will this work for the Silver toe Jordan 1’s??
You can certainly apply the Matte Acrylic finisher to the Silver Toes. It will give it a flat effect as demonstrated in the video.
Waaay better
I just finished my custom, do i need to let it dry for about 48 hours before using the finisher? And after using the finisher can i let it dry by itself or is a heat gun necessary?
It's always a good idea to let the paint dry and cure as much as possible but some people add the finisher as soon the last coat of paint is fully dry and others allow 48 hours to pass. Try out both ways and see what works best for you. Just make sure the paint is completely dry to the touch and use a heat gun or hair dryer to insure the paint is set. Regardless, we recommend that you give at least 48 hours before for the paint to dry and cure before wearing or using the custom.
@@AngelusBrand hi! I followed the video and gave my finisher a good shake, but my flat black still became gloss?
@@justanotherguycommenting5754 probably shouldve added a small amount of duller to the matte finish cuz ther's still some glossiness to the finish
i applied the finisher 2 times but the paint came off from the bottom and i weared them for like 30 minutes. what should i do?
The finisher is not going to keep the paint from chipping. It sounds like you painted the sole too. Angelus Paint is not recommended for use on the very bottoms of shoes as the paint will wear away as soon as you start walking in them. Angelus Paint also works great on certain Soft Midsoles (Jordan 3's, Jordan 4's), and will not hold up on hard midsoles (Converse, Vans, Jordan 1's, Air Force 1's, etc). We want you to have the best experience possible with realistic goals.
So wait after you deglaze the shoe you spray adhesive spray ???
You would deglaze first. You need to make sure to take off the manufacturer finish. ADHESIVE spray is usually sticky. Meant to "adhere". I would look into ADHESION promoter. That allows the paint to be applied to plastics, and other hard areas.
Can you mix duller and matte finish together. I saw a video that someone mixed them together.
Yes, duller can be mixed with the paints and finishers. Just make sure to not add more than 8% of Duller to the mix.
@@AngelusBrand I found that out. Lol
@@dyno_mite what happened?
@@Longpipejang it looks powdery
Amigos alguien sabe si puedo aplicar el bright sole en unos jordan 36 son de un material como de lona
first
second person in the comments lol
I love patent leather just wish they would avoid high crease areas and it would look so sick. Everyone has saying or matte finish it’s so rare to see that beautiful patent leather which isn’t even made from leather anymore :)
Great custom job tho!
Agree! it would make all the difference in the world to keep it off the toe box!
hello can i apply the matte finisher with a brush?
In the video he mentions how you could use a brush but it may be a bit harder and the results may not be as good. Go very light coats and hit it right away with some heat.
@@AngelusBrand okay, thank you so much!
I’m new to this, and VERY confused. Why, would I apply a high gloss when I already just applied and desire a matte finish?
You don't have to apply the high gloss. In fact, any of the finishers are optional. It depends on the type of finish you want. If you want a matte finish then apply the matte and if you want a high gloss then apply our High Gloss. If you have any questions please feel free to contact our custom support team.
Angelus Shoe Polish Of course. I get the idea behind applying one or the other finishes. My question regards why one would apply BOTH high gloss and matte finishes to the same project. Just wondering about the thought process behind that. Could you elaborate? Thanks in advance.
Fuckin' Dope!!
Is this ok to use on top of posca paint markers?
Hey Shawn! that should not be an issue. As long as it is a water based product.
Hey sir what is the factory finisher for jordan 1? On black part
Matte finish tends to be the closest finish for 1's that are not patent.
@@AngelusBrand thanks sir