How to Custom Paint Air Force 1's Tutorial (Easy In-Depth)
Вставка
- Опубліковано 12 тра 2020
- How to Custom Paint Air Force 1's Tutorial
Hey cuties, in today's video, I explain step by step how I custom paint shoes. In this case, I'm about to customize Nike Air Force 1's (AF1). This tutorial is pretty in-depth but it should be easily digestible. Because they're leather, these steps are a little different than if you paint on a shoe like Vans (which usually consist of canvas material. Either way, a lot of the steps are the same but the preparation is a little different.
As you can see, it's a pretty basic design with color blocking. This shoe still took around 5 or 6 hours total so make sure you are patient with the process to get the best results.
I hope you enjoyed the video! Leave a comment down below if you have any suggestions of content or how to make videos...new to this so open to learning!
Check out my online sneaker store! DM me on my Instagram for special orders!
www.thecustommovement.com/ran...
Links to supplies I use:
Angelus Paint - amzn.to/2T1sBYf
Spray Paint - amzn.to/3fLGYJI
Exacto Knife - amzn.to/3cwE8X0
Paint Brushes - amzn.to/3fLsKbL
Airbrush - amzn.to/2WtsQ01
Masking Tape - amzn.to/3dHq9xN
Acetone - amzn.to/3cH5Tfu
Cotton Balls - amzn.to/3cHlSdT
Mixing Cups - amzn.to/3fO4rdi
Cotton Swabs/Q-Tips - amzn.to/2Z7NdBE
Angelus Matte Finisher - amzn.to/3btxFuH
Matte Spray Finish - amzn.to/2LrvbCt
Follow me :)
Instagram (Personal) - @Randeeezy13
Instagram (Sneaker) - @RanDeeezCustoms
Twitter - @Randeeezy13
Tik Tok - @Randeeezy13
Twitch - @Randeeezy13
In this video I used Angelus Paints...not sponsored by them...considering I have 19 subs...but damn their paint is niceeee.
If you have any questions, comment below!
hi!
can i use any acrylic paint? can i use apple barrel acrylic?
does modge podge work as a finisher?
can i use regular nail polish remover as acitone?
Hello! Yea you can use any acrylic including apple barrel. Just make sure you prep the surface correctly. And I probably wouldn't use mod podge but I know they have a bunch of different kinds so you may be able to use that brand, if you find the right one. And as someone who has never painted their nails before, I'm not sure what the ingredients are in there but if it's acetone, that should work as well. To be honest I feel like buying acetone might be cheaper than nail polish remover but then again, don't know much about nails. Hope this helps!
Randeeezy13 thank you !
nattie 2707 of course! Good luck on your next piece!
Hey , i have painted my black af1 white I'm getting brush strokes , how can i fix that???
Here’s what I learned
-use acetone first
-clean paint brushes
-take your time you don’t want it to look booty
-don’t go in a tsunami
PSA - I've never gone in a tsunami so I'm not completely sure
when you said 2-3 hours my face went 😳 it’ll probably take longer since this is my first time too 😭. thanks for the tips!
Haha well better than rushing it! But I would say I'm on the slower side haha but good luck! 😊
only 88 SUBS????!! MAKE THIS MAN FAMOUSS
Love that 😘
thank you so much for this!! painting the swooshes on my high top AF1’s with Angelus paint and this video was everything I needed! ☺️
I'm glad I can help! Good luck on your customs!
thank you so much for not speeding through the painting process. seeing it in real-time is extremely helpful!
I'm glad you enjoyed it! 🥲
Thank you so much for this video! I am customizing shoes for my boyfriend's brother and I have been scrolling through your comments for any other questions others have asked. I almost used fabric paint! but now I know to use normal acrylic paint as long as I prep well. Your video was very educational, thank you for helping me with my present!
Of course! Glad I can help! You're gonna kill it 😊
Thank you so much! I've actually been planning on using this exact colorway for customizing, so this was very useful!
I’m glad I can help!!
Thank you so much I was wondering why my paint didn’t look as stable when I put it on my shoe very helpful
Glad I can help 💙
Thank you I watched a lot of videos and yours was completely straight forward and I’ve learned so much. Thank you so much.!
Glad I can help!
Great video. You've been really helpful! I can start painting my own shoes now :)
Glad I could help!
No idea why you only have less than 300 subs. Straight forward tutorial and advice which is great and your painting/finish is clean af. I've been watching quite a few tutorials lately as I'm going to paint a pair of AF1 for myself but some people with like 100K+ views and their end product is so messy lol... blow my mind. You have earned a new sub dude! Keep up the great work.
Thanks I appreciate it ❤️ just need to post more haha
Painting mine with these colors it looks dope
Yea these are my fav 😊
10/10 video, thankyou for the tips!
yea of course! hope it was helpful!
This was very helpful my co-workers son is in love with the American flag and he wanted some nikes with the flag on them for the 4th of July but since it is to late and no one had them with the flag on them this year I am thinking of making him some for next year
Awesome I hope my video can help with that!!
super helpful, thanks for the tips!
😊
i know this was posted a long time ago but i just wanted to say thank you , you and a few others on here inspired me enough to actually wanna try this .
You should go for it!! It’s a fun process!
@@RandellKanemaru im def going to , im waiting for black friday and gonna get me all the stuff i need off angelus , from what i found from years past they usually have 20% off everything and ima get the airbrush set up off amazon.
Oh dope! Airbrush is soooo nice
@@RandellKanemaru yeah im not even trying to leave brush strokes lol
I subbed for the informational video and I liked for the fact you’re replying to any questions you get even after all this time, thankyou for putting the effort in for that man. I’m about to try painting my swoosh, wish me luck:)
Thank you! 💙 hope you enjoy some of my other vids too! Good luck on your customs and let me know if you have any questions!
@@RandellKanemaru I binged through pretty much all of them last night and enjoyed every one🤣and I painted the swoosh whilst doing so, which went great thanks to you. Thankyou again man
Ayy nice! Glad it turned out well!
nice work ill be taking somme of your points in making things work for me. Tha
nk you
I bet your shoes will turn out great!
Thanks man trying to customize my first air forces and i would of failed really badly if it wasn't for you thanks man
Glad I can help! :)
Do you need matte finisher and finisher spray or are they the same thing ? Thank you for your video it was extremely helpful ! X
They aren't the same but you don't need both. Either one works! And thank you I'm glad I can help!
thank you so much for this !!
Of course! Hope it helped!
thanks bro it was very helpful
I'm glad!
The tsunami part tho!😂 Anyways, this was really helpful 👍🏽
Hehe thanks I'm glad!
Thank u! Just painted this
Probably turned out better than mine! 😊
This video clarify all my doubts,the best one I could found so far, besides It was funny.
(It reads like a boot comment, but I’m a human , I promise 🙏🏼)
Hahaha I appreciate the kind words :)
Perfect tutorial
Thank you! I hope it was helpful!
so if i wanted to continuously paint, clean, and repaint my forces, would i skip the acetone and finisher step to get the paint to come right off after i paint them?
Yea don't finish them cause then it'll be harder to take off
looks dope
Thanks 😊
Hey I just saw your vid! Glad I came here. Do we always need to have a thinner mixed with the paint? Or nor really?
It would help but not necessary per se
Hey ! Good vidéo very helpfull.. but just one thing... no one talks about quantity of paint for an AF1 pair. For the light blue part, if we going to do 4/5 layers, how much paint do i need ? 1oz it's enough or 4oz is better ? Thanks !
1 ounce should be plenty. The layers are very thin so a little can go a long way!
Good video, very informative
Thanks I appreciate it!
I would like this 100 times ‼️‼️‼️🤦♂️👍✍🏽😌🙏🇯🇲🇯🇲
Thank you ❤️
Beautiful .
Aww thank you ❤️
hello! Im planning on customizing my af1 Nike logo and using the matte finish on it but I've heard people were saying that it makes it shiny. Do you think it would be okay just using the matte finish on the Nike logo? Or should I use some duller. Anyway the video helped👍
You can always start out with some duller mixed in. If it’s too dull you can use some matte finish without the duller to make it shinier
Hey, I bought the normal finisher from Angelus, will this be too shiny? Also if it ended up being too shiny, could I order a matt finisher to go over the top? Video was a lot of help, thanks!
The finisher being too shiny is subjective, but for me personally I like the matte finisher too. If you were to go over with a matte finisher it should dull it a little bit. Thanks for the support!
if i were to paint the “AIR” and the line on the sole do i need to rub acetone and put the finisher as well?
I would to be safe. Midsoles are tough to keep the paint on though!
would i be able to use regular acrylic paint and modge podge? I just want to paint one pair of of my air forces, I don't plan on making this a serious thing..
Sorry for the late reply! I wouldn't recommend modge podge. That's better with like finishing painting cups and vases and such.
I've seen other videos where they add duller to the paint is that necessary, and whatw the difference if there's any. Thank you in advance
It's not necessary, but duller makes the paint "less shiny"? More matte I guess? The best way to describe it is that it "full" the color of the paint lol but it depends on what kind of look you're going for! Most colors on shoes are of the "dull" variety
Nice video, I'm a newbie!
Thank you! I hope this helps a lot!! Let me know if you have any questions!
Nice. I want to do pink white and black for my daughters shoes
Ooohh that would look sick!
Um idk if im asking too late but do i still have to use acetone or a preparer and deglazer to prep a old skool van shoe?
Nahh for vans you don't since the fabric isn't leather
Thank you so much that is so helpful tysm
Glad I can help!
Is angelus “leather prep and deglazer” just acetone? Or should one spring for the product?
I would just get acetone! It’s cheaper
Can you use modge podge finisher? Or does it have to be the one you showed?
I would try to use one similar to the one I showed. There's alternatives, but I don't think modge podge is a good finisher for shoes
A Question: what happens if I dont use acetone. I just paint directly on the shoe? will it still work?
Nahh the paint will chip quickly and then you'll have to start all over :(
In your experience, how well does paint hold on the soles? I wanna paint some all white Court Visions but idk if the paint will stick to rubber. Thanks!
What if u sanded it down just a little to make it rough so the paint would stay on it
Unfortunately the paint doesn't hold up well on them :( I'm not too sure how to prep/paint/finish them to make them last a while
My soles have held the paint when I painted them so idk
@@feizzed4042 idk how it usually rubs off fast
@@simmsluva9924 paint hasn’t worn off yet for me 🤷♀️
Hey man, how much angelus paint do you think I’ll need to paint an dunk low size 8 like the university dunks?
Very small amount. One ounce bottle can be used to paint a dozen
yooo idk if u sell them but i want to so do i wait for a request to buy them or do i buy them and put them up and hopefully someone wears that size
Umm considering I'm broke af I usually wait until I have someone that wants a custom and then I make it. I would take pictures of all your designs and post them on reddit or websites you can sell them for a fee. I think custom movement is one of the more popular ones you can do that on! That way they can buy the size of a design and you can build a portfolio that way. Hope that helps and good luck! 😊
Can I use acetone and the angelus deglazer or would that be too much and should I stick to one only?
One should be fine! But I would recommend a couple coats!
how much paint did you use for the light blue section of yours? would it be enough for one pair if i bought a 1oz bottle?
I don't remember how much exactly but one ounce is more than enough for a couple coats for a pair of shoes.
I think the hardest part about this is I have adhd and I dont wanna ruin my shoes lmao
@Jet Pistol420 it’s a good experience
Yea it takes a lot of patience :/
so the finisher does act as a waterproof? and would you acetone the bottom non-leather the "---AIR----" if you were to paint it ?
Somewhat...I would say it's more water resistant than water proof. I wouldn't abuse it with weather to make them last as long as possible. As for the AIR logo, I wouldn't recommend painting the midsole as it doesn't last as well but if you do I would use acetone to clean it off.
I know I am very late, but is that 100% acetone or a different percent acetone?
From my understanding, Klean Strip acetone (the brand I use) isn't pure acetone but close to it. If you want pure acetone probably best bet is to get nail polish remover but will most likely be more expensive.
what do you do if you want to use marker paints? Can you use White for a base then begin painting?
I've seen other people use them so I'm sure they work fine! I've never used them though
does it always have to be white shoes? Can I paint on black for example? Would 2 coats cover black?
You can paint on black! But you'll probably need way more than 2 coats since the black will be harder to cover
Hi thank you so you showed us how to do leather and I love it can you show us how to do canvas? Is it a different type of acrylic paint and also a sealer type would you recommend?
Hi! I don't paint shoes too often anymore so I can't show you, but if you're talking about canvas like vans, you need to use a thinner for acrylic paint and make it more watery. You don't need to do as many layers for this, as a couple coats should be good (you won't get as many streak marks with canvas shoes). I hope this helps!
@@RandellKanemaru YES Thank you.
@@Dolldoll100 of course! Good luck!
Hey Randell , what type of brushes were you using in this video ? If you don't use the same ones now, What do you use now? Im trying to find good brushes, What's the best type of brush to use that does its job well.
To be honest I'm not that paint brush savvy, but I do believe better brushes are a better investment if you're going to use them often. But it comes down to how well you take care of them (cleaning then after every use, positioning the brushes, etc.). With that said, I'm pretty sure I just bought a variety pack from Angelus and a couple fine point brushes from there as well and they do the job well for me!
@@RandellKanemaru thank youuuuu
Of course 😊
Is it possible to blend the pale blue with some white and make a pastel-ish blue color?
To be honest I have no idea, I'm colorblind and idk how colors work. Best bet is to try to mix a little bit of what you think works and then make small changes from there. Sorry about that!
To make paint stick 'like a pro' we should use a fine sandpaper ,start with 400 than 800 and finish with1600 grit
Just be careful of the stitches
^^^
@@nickskicksofldn ,when i am done with the sand job ,i work all the stitching with the flame.
@@alexkastano96 👍🏼
Thanks, I was just about to mention that I seens someone say to use deglazer, then sand and repeat a few more times... Idk why ppl don't mention these important steps but I was wondering, what if I only have 80 grit sand paper? Would it still do the job or should I just wait?
Hi i have a colored airforce ones. And i want to paint them. Should and how can i take off the original color(violet)? Or i can just paint them over?
You can't really completely take off the old color. Best option would probably be to use acetone to take as much of the factory finish off and then paint over them
Can you use nail polish remover to prepare the shoe?
Yes you can!
will paint leather preparer and deglazer work instead of acetone?
Yep! As long as the shoes you're working with are leather like af1s
Do I need to use acetone on the soles? I am attempting to paint the bottom side areas as well. I want my shoe to have the "all over" pained look.
I don’t know if that’s good or bad. I’ve never painted the soles I’m sorry :/
Hey, just starting out with customising, could I please ask how long you wait between coats?
Since I usually use a blow dryer, like 5 or 10 minutes. I would be longer if you let it air dry
Would the angeles paint work on the midsoles of some nike airmax plus shoes? The area that usually turns yellow. I'm sure you know the white part of those shoes eventually turn yelllw and it makes the shoe just look old and ugly. Do you know what's best to use? I was wondering if I can use the leather paint on the white midsole part for my airmax pluses.
You could use it but I wouldn't recommend painting the midsoles as it tends to wear off faster. I'm not too sure what's the best way to paint that to be honest. I'm sorry I don't have a better answer :(
This is so helpful! But one question, would nail polish remover work in place of the acetone?
Thank you! And yes that would work!
@@RandellKanemaru ok awesome! And also would sharpies work for drawing on some of the shoe?
It would work but to be honest it doesn't look that good. I would use a finer tip paint brush instead. It's hard to paint thin clean lines so you could practice on canvas or something before using a shoe but I would advise against a sharpie. My first ever video I used sharpie on the vans and it didn't turn out good Imo
@@RandellKanemaru ok thanks!
Good luck! ❤️
Hello, I did some of my own and I followed this tutorial and unfortunately the paint has cracked around the crease on the side. Do you have any tips on how I can fix this please? :)
Unfortunately I don't 😞 I can look some up and see if they work! I've been really busy with work so I haven't been able to do any of this for a while
I saw one video from one of the artist on the Angelus UA-cam page, he said to use sand paper for the areas that creases when doing your prep work, and this will help with the adhesion of the paint to the leather.
Could we use nail polish remover instead of acetone?
Yes you can!
Can you still put them in the wash when they get dirty or will it affect the paint?
I've never done that. I've used shoe cleaner on them and that works! But make sure you aren't too rough because then the paint could scratch!
Would mod podge be okay to use as a finishing coat?
I wouldn't advise that. It's a lot thicker than others. I've never used it but I don't think it would work
Can you use any acetone or does it have to be a certain one because when I search it up it comes up with nail polish remover
It can be any. Nail polish remover works too
What did you mix the paint with at the start was that a cup of water to thin out the paint?
I'm sorry I don't remember it's been a while :(
Do you need to use acetone if you have had and worn your air forces for over a year?
Yea you do. But you should clean your shoes with shoe cleaner first to get all the dirt and debris off first, then use acetone
If you buy shoes that already have some color on them because you want to paint other areas, will acetone hurt those color areas?
Yea it’ll fade the color. You can still paint over them. If you don’t want acetone to get on it, I would tape over it
Does the custom pain wash off? Or it takes time? Hope I'm not too late for an answer
Sorry for the late response! It will wear off over time but that's due to regular wear and tear. If you make sure you prep and finish them well, they should last a while. Hopefully that helps!
Great video and customs st8 to the point.
Thanks i appreciate it ❤️
@@RandellKanemaru just giving respect when it's due. I'm just having little trouble masking the shoe because I think I have to hide everything lol. Like do you have to cover the whole swoosh even where it meets the panels? Or just paint the top of it? lol any pointers I'd appreciate
I'm not too sure if I understand your question. What parts are you trying to paint? If you're only trying to paint the swoosh, you can just tape off areas around the swoosh, but you don't need to do the whole shoe unless you really don't trust your painting skills
@@RandellKanemaru the side of the swoosh
Ah you just have to tape around the swoosh so you don't get paint splatter on the side panels. No need to do the whole shoe!
Would I use angelus leather preparer and deglazer instead of acetone?
You can use either
Either should work fine!
Can i use tarrago geglazer instead of acetone? Or there's a big difference?
To be honest I'm not sure what that is :/ if it's a deglazer it's *usually* different but I'm not sure in this case I'm sorry 😭
Could i use preparer and deglazer instead of acetone?
Oh yaa
Which paint should I use to customize nike mid blazer ‘77?
If they're leather you can use the same that I use! The Angelus leather paint. For something softer, you can still use them but you need to thin it a lil bit. Hope that helps!
does the angelas deglazer do the same job as the acetone??
Yea you can use that as well!
will the satin finisher make the show too shiny to no? thanks!
I'm not sure if I understand your question but a satin finisher won't be as shiny as a gloss. But let me know if that doesn't answer your question!
What kind of paint should I use to fix my air force ones ? The orange on them is fading on the side
Angelus products always seem like everyone's go-to!
If I’m using a lower heat on the hair dryer do I use it with hot or cold???
Still use hot!
underrated thx soo much i needed this!
Glad I can help!
Can it be any acrylic paint or ones specific for shoes please?
Pretty sure you can use any acrylic paint! I would just do a Google search on a certain brand you're looking for to see if it's good for you shoe material.
Is it possible to mix the colours and make a new one or is it better to buy all the colours separatel? For example am I able to make pint if I mix white and red or it won't turn out good???
Yea you can definitely mix! But I would suggest you start mixing with very very minimal paint to try and get the tone you want. If you get to a point where you like the color, keep adding a little at a time. This helps you from wasting too much paint by mixing some together and it not being the color you want. But yea you can also buy if there's a mixture that matches exactly what you're looking for!
@@RandellKanemaru Thank u so much, very helpful! Love ur work :)
Thank you I appreciate it ❤️
Hope you can help.
The nike swoosh logo on my airforce one is like a suede or felt material. What kind of paint do I use for it if I wanted to change its color from red to white?
Oof I’m not sure about suede. I’ve never painted suede and I don’t know if that’s actually good because suede is a very delicate material. Water alone ruins suede so I personally would recommend painting at all. I don’t even know how you should alter paint if you still want to do it I’m sorry :(
@@RandellKanemaru no worries. Thank you for your quick response.
More power to you!
do you apply finisher over the whole shoe or just the painted parts?
It depends. If you used acetone on the whole shoe, then apply the finisher on the whole shoe as you took the factory coating off the whole shoe. If you only did it on the painted parts, you only "need" to put it on the painting parts. Hope this helps!
would nail acetone work? or does it need to be something similar to the klean strip heavy duty type acetone? :-)
Yes nail polish remover works too :)
Nahh nail polish remover would work!
Does nail polish remover work if it has acetone in it?
Yea that works!
Will we be needing Aceton if we've applied Angelus preparer?
Nahh you should be good! They’re essentially the same thing!
Can I customise my red white shoes? Like cover the red with another colour? I doubt it will not work
Yea you can! You may just have to paint more coats on, especially if you're trying to cover it up with a lighter color
cool! thanks for the reply, anyway great video! :)
How to clean your brush in detail in between colors? Pleasee
Sorry for the late reply - In short, I would dip the brush in a cup of water and stroke the bottom of the glass like I'm painting it. Then would take it out and dry it with a paper towel by folding it over the brush (if it's a flat head brush). If there's no color in the water, I feel like it's clean enough to use another color. If there's some runny color on the towel, I would repeat the process.
Can I clean off the brush with acetone?
You may be able to, but I didn’t I just used water. Water is the safer option imo
After applying the acetone, is it necessary to use Fabric paint, or can I use normal acrylic paint?
You can use acrylic!
@@RandellKanemaru thank you so much ☺️
Of course! Good luck kn your customs! 😊
can we use nail polish remover instead of acetone?
Yes you can!
Is there anything else I can use what I might have at home instead of deglazer
You can use acetone to take off the factory seal
What do I use to paint the threading? Like fabric softener or what?
I'm not sure I fully understand your question. Like the stitching of a shoe?
@@RandellKanemaru Like parts where they stitched Nike (on the tongue and back). Do I use a fabric softener for that part since it's not leather?
Oh yes something like 2 soft would work better with that kind of material