⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/k_lcDzEWLs5fVRYceK3-9Q.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Most modern transmissions have a mechatronic unit, which controls shift patterns, sport/tiptronic, economy and adaptive learning etc. Blown fuse, probably poor shift quality, no modes, and in some cars, no forward motion/gear selection.
I parked my car the night before. Next morning it wont start. Has a red transmission light. Diagnosed it with inpa and codes that came up were cf17, cf16, cf15, cf14. Any advice woule be helpfull please
@@riquensanderson5182Hi guy, i have a same problem ! I ve got a 330i e90 bmw automatic transmission. And my car has same problems i think ( transmission light and no start but crank ) .
I have a 2006 bmw 325i 6cyl Automatic. I have Code U11OF. If feels like its stuck in a higher gear when start off. I can get it to 60mph but it doesn't shift at all so by the time I hit 60mph its at 5k RPMS. What can cause this?
I replaced, the cas fuse, the starter and battery, replaced the plugs and coil car still wont start, please help. I have code u110f, tcm will that make it to where my car will not crank or start?
@@n5xgarage750 so there was a shortage in the harness that lead from the starter to the cas module fuse.. I'm not to sure if I'm wording it right but that what it was.. it's better to take it to a shop before you spend tons of money like I did.
@@chrispharaoh303 hopefully your still around what were your symptoms? Because I have an 2011 e92 n55 no crank no start with a transmission malfunction on dash been like this for 7 months just took to a local shop to have them tell me what I already knew for a cheap $700...... and car is exact same as when it went in....i got codes for no communication between the dme and transmission so sent dme off for repairs came back took care of some codes but car is still no crank no start no communication with transmission......kinda not wanting to send it to another shop here in my local town and bmw dealership is 40 miles away
I have the same problem and in cyprus mechanics are scamers.... i spend a lot of money for nothing today changed thermostat and again when it gets the tempersture its transmition error ... before i chsnged body valve service etc... now they ssying its the ECU gearbox and asked me for 900e for the part and 300e for oil and filter again ...
I have a code p1776 which fuse goes for it’s location I can’t find any info on what fuses It should be and it currently doesn’t have one where it’s supposed to be
@@daveroberts936 mine is a 2008 328i 4 door sedan and my fuse puller is mounted even different..I only have one fuse in spot #4 and the whole panel is different..maybe this is because its a sedan.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos:
ua-cam.com/channels/k_lcDzEWLs5fVRYceK3-9Q.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
This fuse provides power to the transmission? I've never heard of a transmission needing a fuse. And what happens if the transmission fuse is blown?
Most modern transmissions have a mechatronic unit, which controls shift patterns, sport/tiptronic, economy and adaptive learning etc. Blown fuse, probably poor shift quality, no modes, and in some cars, no forward motion/gear selection.
What we all would like to know is, what made you suspect the transmission fuse in the first place!
I parked my car the night before. Next morning it wont start. Has a red transmission light. Diagnosed it with inpa and codes that came up were cf17, cf16, cf15, cf14. Any advice woule be helpfull please
I have the same code cf17.... did you ever find the issue
what ended up being the problem for code cf17 ?
Ecu got wet. Had to put in a new lock set. Ecu, Cas and frm footmodule. Started right up after that
@@riquensanderson5182Hi guy, i have a same problem ! I ve got a 330i e90 bmw automatic transmission. And my car has same problems i think ( transmission light and no start but crank ) .
I have a 2006 bmw 325i 6cyl Automatic. I have Code U11OF. If feels like its stuck in a higher gear when start off. I can get it to 60mph but it doesn't shift at all so by the time I hit 60mph its at 5k RPMS. What can cause this?
I have the same problem
a Fucked up axel from drifting too much
X2
I have this issue as well
When the transmission goes into limp mode is takes off in 3rd gear, doesn’t mean it’s broken
Just means something’s not right
I replaced, the cas fuse, the starter and battery, replaced the plugs and coil car still wont start, please help. I have code u110f, tcm will that make it to where my car will not crank or start?
Chris Anderson did u fix
@@n5xgarage750 so there was a shortage in the harness that lead from the starter to the cas module fuse.. I'm not to sure if I'm wording it right but that what it was.. it's better to take it to a shop before you spend tons of money like I did.
@@chrispharaoh303 hopefully your still around what were your symptoms? Because I have an 2011 e92 n55 no crank no start with a transmission malfunction on dash been like this for 7 months just took to a local shop to have them tell me what I already knew for a cheap $700...... and car is exact same as when it went in....i got codes for no communication between the dme and transmission so sent dme off for repairs came back took care of some codes but car is still no crank no start no communication with transmission......kinda not wanting to send it to another shop here in my local town and bmw dealership is 40 miles away
I have the same code u110f and the car won’t crank or start 😭
@@patchoucoc.5238 throw the whole car away, car is trash.
Can the fuse blown cause the car too get stuck in one gear after it gets hot?
Did you ever get this problem fixed I'm having the same problem transmission stop shifting when car warms up stays in first gear
I have the same problem and in cyprus mechanics are scamers.... i spend a lot of money for nothing today changed thermostat and again when it gets the tempersture its transmition error ... before i chsnged body valve service etc... now they ssying its the ECU gearbox and asked me for 900e for the part and 300e for oil and filter again ...
I have a code p1776 which fuse goes for it’s location I can’t find any info on what fuses It should be and it currently doesn’t have one where it’s supposed to be
Good morning, i have a 2011 bmw 750li. I will not go into park.
Hi can i help you?
does this fix code p1727
2007 bmw 550.. was driving fine then threw the transmission malfunction.. 25 mph.. tried the reset... could this really be a FUSE?????? TIA
Did you ever figure this out ?
what is fuse number 1 didn’t get it
who knows what code cf17 means, got an 08 328i
my fuse panel is not like yours where is this FUSE ON a 2008 328i SEDAN, 4 door?
It's gotta be in the same place. I have a 2007 328 and it looks exactly like that
@@daveroberts936 mine is a 2008 328i 4 door sedan and my fuse puller is mounted even different..I only have one fuse in spot #4 and the whole panel is different..maybe this is because its a sedan.
@@gail6904 you got a n51?
@@noahzm_ hi NO i have an N52 6 cylinder 2008 BMW 328i 4 door automatic sedan
NO N52 E90 2008 328i