How to Install a Dump Valve / Blow Off Valve BOV

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • How to install a Blow of valve aka BOV or Dump Valve in simple easy steps
    Feel free to buy me a coffee ☕ If the video helped you out www.buymeacoff...
    To Buy the new upgraded blow off valve: rb.gy/uqsfvc

КОМЕНТАРІ • 326

  • @BMACCARMODS
    @BMACCARMODS  2 роки тому +4

    Feel free to buy me a coffee ☕ If the video helped you out www.buymeacoffee.com/bmacvags

  • @tunersparadise907
    @tunersparadise907 5 років тому +44

    Couple things, Installed backwards. Also when adjusting the valve tighter/harder the more boost pressure your vehicle should have to dump off. Example Forge BOV recommends 17 clicks clockwise for 7-11 lbs of boost (stock is 8-10) If you are tuned to 18lbs (stage 2) Turn it 26 click forward. The more boost/power you make the better and bigger the valve should be because you dont want to be releasing 25+ psi from a little bov. Also if you hear a flutter thats actually your bov leaking indicating youve installed it wrong. It should make a solid swoosh noise. The flutter comes from a turbo filter which stock 1.8t dont come with.

    • @Sam-Thomas36
      @Sam-Thomas36 5 років тому +1

      Joel S thank you man, installing mine today this helped

    • @tunersparadise907
      @tunersparadise907 5 років тому

      Sam Thomas np man if u have any questions lemme know

    • @Yorn2000
      @Yorn2000 2 роки тому

      @@tunersparadise907 mine had power loss and I don't know why

    • @loosegoose8158
      @loosegoose8158 2 роки тому

      Mines running 35psi should I turn it all the way up

    • @prodsbyskay2102
      @prodsbyskay2102 Рік тому +1

      how many clicks for a stock engine?

  • @chzecrepublican2008
    @chzecrepublican2008 2 роки тому +14

    The purpose of a blow off valve is to dump all the boost pressure when letting off the throttle but those are installed on the charge pipe after the compressor. This is installed before the compressor so it doesn't actually do anything.

    • @zacharymcbride9587
      @zacharymcbride9587 2 роки тому

      Apparently nobody knows how to put a spring driven diverter valve in the bottom is supposed to be connected to the charge pipe to release the excess boost back to the turbo inlet so you don't as much boost drop off during gear changes

    • @benemeney7336
      @benemeney7336 2 роки тому

      Probably a good thing it doesn’t do anything because it’s gonna set his engine management light on

    • @ya472
      @ya472 Рік тому

      At @ 3:53 is your answer.

  • @unclebugspayton
    @unclebugspayton 5 років тому +84

    Did he say 8 months??

  • @NjoyMoney
    @NjoyMoney 7 років тому +35

    HAHAHAHAHAHA took 8months?!? lost my shit right there hahahahahah

  • @ricardovazquez3486
    @ricardovazquez3486 4 роки тому +13

    How many turns did you do on the blow off valve to get that nice sound ?

  • @Reppiirezz666
    @Reppiirezz666 2 місяці тому +2

    Can I install it if I don’t have a turbo in car??

  • @nm-lz4gt
    @nm-lz4gt 4 роки тому +6

    How long did the turbo last with this blow off valve? They are re-circ for a reason, mines was vented to atmosphere and didnt get 3000rpm before the eml was on and turbo blew on me, costing me a small fortune

  • @tonyoestreich1764
    @tonyoestreich1764 5 років тому +4

    Everyone thanking you for showing them how to install it backwards! LOL

    • @Daygunjim
      @Daygunjim 5 років тому +2

      Can confirm this has been installed back to front! You want the bottom of the BOV feeding from the turbo boost pipe (left) not the intake pipe like you have done. Pains me to see "how to" videos that misinform people!

  • @Mike-fn2ks
    @Mike-fn2ks 9 років тому +12

    where should you set the plumb at ?

  • @MikeSimOle1
    @MikeSimOle1 7 років тому +7

    He said this is really really easy to install and he installed it WRONG!! lolololol 😂

    • @conner-2296
      @conner-2296 5 років тому +1

      How?

    • @nm-lz4gt
      @nm-lz4gt 4 роки тому

      Its meant to be re-circulated back into the intake.....not to atmosphere on the otto engines

    • @MikeSimOle1
      @MikeSimOle1 4 роки тому

      @@nm-lz4gt I love that you replied on a 3 years old comment

  • @AF_PT
    @AF_PT 8 років тому +1

    i have one of these. the top 2 outlet are connected inside the valve = unfiltered air will be sucked by the turbo when off boost.
    fitted the wrong way round like in this video means boost is immediately vented so you won't even have boost...

  • @90nadz
    @90nadz 9 років тому +4

    I'm thinking of installing on on my Audi TT 1.8Q. Can I get the details of the Bov that you brought or is there any that you reccomend? Also is the installation as simple as the one on the Golf. I'd appreicate your reply. Many Thanks! :)

  • @firassayah
    @firassayah 8 років тому +8

    i guess its fitted the other way around try horizontal fitting for louder wooosh

  • @Mach_8
    @Mach_8 8 років тому +7

    legend.. thank you very much

  • @KieranBartlett
    @KieranBartlett 6 років тому +1

    Should the bit u put in the down facing pipe be installed in the pipe to the left hand side then ? Is there a video anywere showing the correct way to install this piece? Thanks.

  • @loganclough4937
    @loganclough4937 3 роки тому

    There are some special plyers for them VW hose clips... So much easier!

  • @elmicandelaria8214
    @elmicandelaria8214 7 років тому

    Explained it the best out all the videos I've seen for a vw

  • @BABYGODZILLA2009
    @BABYGODZILLA2009 3 роки тому +1

    Hey man, nice video, thanx, i have a turbo setup in my car, thinking of adding a BOV, question is, will this affect my fuel economy? Thanx bro.

    • @BMACCARMODS
      @BMACCARMODS  3 роки тому +1

      Depends on how you drive and how much you need to hear that "Swooooosh" sound

    • @jermainejohnson4318
      @jermainejohnson4318 2 роки тому

      @@BMACCARMODS can it only be install into a manual car?

  • @mannysantana7425
    @mannysantana7425 5 років тому +1

    Just what i needed thank you man

  • @iMann_iFail
    @iMann_iFail 8 років тому +44

    Fitted wrong.. You want it dumping from the turbo boost pipe and cap off the lower hose that's attached to the intake from the air box..

    • @vq35ftw
      @vq35ftw 8 років тому +2

      you know how long that took me to figure out smh.....

    • @iMann_iFail
      @iMann_iFail 8 років тому

      vq35ftw it happens.

    • @G1bson258
      @G1bson258 7 років тому +2

      iMann iFail so the bottom goes into the bigger tube to the left and the side goes into the bottom? So the bov open socket should be facing the sky? Where it makes noise at right?

    • @NjoyMoney
      @NjoyMoney 7 років тому +1

      Thats not what the forge BOV installation guide says..

    • @TheSkatersoldier
      @TheSkatersoldier 6 років тому +1

      iMann iFail fitted wrong? but you hear the noise.., plz explain! i bought one :/

  • @swinners7256
    @swinners7256 2 роки тому

    So you need a turbo for a blow off valve to work I know well the basics I’m 13 and I’ve got a 2011 Suzuki Swift and I’m modifying it until I can legally drive which is 16 in NZ so yeah I just need tips and yeah it would help a lot cheers :)

  • @timwolf6470
    @timwolf6470 7 років тому +2

    Your the man thank you

  • @handymanplasterer4267
    @handymanplasterer4267 Рік тому

    Thinking on putting one on my connect lol but unsure where to get the vacuum line from

  • @MrMaster2262
    @MrMaster2262 8 місяців тому

    😳 8 MONTHS!!!
    ...they had to wait until kids 4th b'day
    to make them before shipping!!! 😂

  • @DaytonCarCare
    @DaytonCarCare 7 років тому +60

    Still sounds like a sewing machine. lol ;)

  • @eliott_dm
    @eliott_dm 9 років тому

    Is it the same way and the same valve for a turbodiesel or is it different ?

  • @lonerideredinburgh
    @lonerideredinburgh 9 років тому

    SUPER COOL VIDEO
    WATS THE TRACK IN THE START OF THE VIDEO

  • @ImEnhalos
    @ImEnhalos 9 років тому +2

    man a fix to sagging cloth in door cards would be awesome!
    or a link to a video bc i can't find anything

  • @rhysryder9780
    @rhysryder9780 9 років тому

    i fitted one of these on my 1.8t vw saloon i can hear it working but when i drive the car all the power has gone i have to rev the crap out of the car to get it moving pretty sure i have fitted it correctly will be putting the standard diverter valve back on so its runs properly

    • @Wristrollsweden
      @Wristrollsweden 9 років тому

      try fitting it the other way around. had the same problem on my Octavia rs, but works fine the other way.

    • @nickmarquez9378
      @nickmarquez9378 9 років тому

      I have the same problem just installed one on my audi a4, my rpms were Reved up at 4000 just to which gears. what brand bov do you have?

    • @stevenstevie3392
      @stevenstevie3392 4 роки тому

      @@nickmarquez9378 did u get A4 sorted

  • @Ali-uv3dz
    @Ali-uv3dz 8 років тому +4

    still its works leaking air ?

  • @mrwafflez2981
    @mrwafflez2981 2 роки тому

    VW MAN. noice! Trying to turbo charge 98 2.0l Jetta GT

  • @wilkinsonyachtbrokerUK
    @wilkinsonyachtbrokerUK 7 років тому +24

    lol his first phone that went off is his dealing phone

  • @yorrickwi
    @yorrickwi 8 років тому +1

    hello i have a car that probably doesnt have a recirculation valve (a 1991 peugeot 1.7 turbodiesel) how to install one on that? it also doesnt have a brake booster so no vacuumpump

  • @privatecitizen8431
    @privatecitizen8431 4 роки тому +9

    You installed the diverter valve backwards champ hahaha

  • @jeanleletnam2634
    @jeanleletnam2634 Рік тому

    Hoe moet je dit ding juist afstellen? Heb er 1 gekocht en ligt klaar om te plaatsen maar wat is de beste afstelling?

  • @ValladolidArde
    @ValladolidArde 6 років тому +16

    incorrectly fitted, pease install it the right way around

    • @SovetskiDuck
      @SovetskiDuck 4 роки тому

      or your engine will keep stalling

    • @thepersonalizer8531
      @thepersonalizer8531 4 роки тому

      SovetskiDuck I wish I knew this today mine kept stalling put the original one back in i
      Now need to fit it the other way round for my
      Engine code lol

    • @fromthearea3147
      @fromthearea3147 4 роки тому

      @@SovetskiDuck his didn't seem to stall?

  • @AtlantaTerry
    @AtlantaTerry 8 років тому +3

    At 00:30 the video CLEARLY says "Blow OFF Valve" not "of".

  • @jakob31448
    @jakob31448 5 років тому +1

    I heard u can hold boost through shifts without a blowoff valve. Is that right?

    • @HoriMotorsports
      @HoriMotorsports 2 місяці тому

      I did that and ended up snapping my turbine shaft, gives the coolest flutter though

  • @onamission8397
    @onamission8397 4 роки тому

    I have same fitted to octavia £17 evay took 3 days to arrive

  • @AmbushP
    @AmbushP 2 роки тому

    What is the best way to get an extra power in your car ,, without ruining it ? On a budget too say 250 squid thereabouts ..

    • @GDUBMX
      @GDUBMX 2 роки тому

      clingfilm the rear seats, then wank over them

  • @gcirc
    @gcirc 9 років тому

    What one would you reccomened for a Diesel 120d coupe bmw

  • @Fathom324
    @Fathom324 2 роки тому

    Do you know where the recirculation Valve is located on a 1.9 TDI VW Passat 3BG (B5.5 2005)

  • @MohVlogs90
    @MohVlogs90 9 років тому +1

    you should do one for (how to install xzenon lights) on Golf MK4.

  • @thugguyuk
    @thugguyuk 3 роки тому +1

    Quick question how much would it cost to get it install on a 1 series

    • @BMACCARMODS
      @BMACCARMODS  3 роки тому

      Thats a bit of a "How long is a piece of string type question" question. What engine do you have? Where are you located? Are there any issues with the car? WIll you supply the part or the garage? etc......

  • @rajgj7041
    @rajgj7041 2 роки тому

    What was that thing u removed to install the valve ?

  • @ajajajfnbrsells1456
    @ajajajfnbrsells1456 Рік тому

    Its same on 1.9 TDi golf?

  • @sandramarques4276
    @sandramarques4276 9 років тому

    This valves work on cars with fixed geometric turbos???

  • @nickmarquez9378
    @nickmarquez9378 9 років тому +1

    Is that a Dewhel dump valve?

  • @barrydownings3337
    @barrydownings3337 8 років тому +1

    any chance of a TDI mk 4 golf video on fitting these? cheers. Bazza

    • @khill607
      @khill607 8 років тому

      Ive got a gt tdi pd150 and i wouldn't recommend fitting a blow of valve on any diesel car. With a diesel engine you want as much air as possible going through your boost pipes and back to your EGR so blowing it off will result in a loss of power.

    • @DnbXDubX
      @DnbXDubX 8 років тому

      +KHiLL what if your car has an egr delete though?

    • @khill607
      @khill607 8 років тому +1

      I wont lie to you and pretend i know because i really dont have a clue haha.

  • @Abdulaziz1122
    @Abdulaziz1122 6 місяців тому

    Does it damage the engine after a while?

  • @Peter_Riis_DK
    @Peter_Riis_DK 2 роки тому

    I'm wondering what is does, when and why...

  • @robertr7925
    @robertr7925 5 років тому +2

    Hope you know that those type of valves doesnt work correctly with an automatic turbo load controller, and the airmass sensor isnt getting the correct information about air/fuel ratio when the air is going out in the atmosphere instead of back into the air intake.

    • @henkka4434
      @henkka4434 5 років тому

      3v myöhässä

    • @HVRKK
      @HVRKK 2 роки тому +3

      So what does that result in?
      What issues will it cause?
      And what's the right way of doing it?

    • @subliminal128
      @subliminal128 2 роки тому +1

      @@HVRKK yeah i wanna know too

    • @benkopic3131
      @benkopic3131 2 роки тому +1

      @@HVRKK The result is that the engine is not getting the air that was metered by the airmass sensor, so the engine will run rich for a moment, the correct way of doing this would be to plumb the air that was blown off back into the turbo, the trade off is that you loose the "PSHHHHH" sound.

  • @Issacko2431
    @Issacko2431 3 роки тому

    Is your car a stock or turbod bro?

  • @ghostedwarrior1968
    @ghostedwarrior1968 3 роки тому

    So my question is that is the blow off valve backwards or not? And if I do install this are my sensors going to ok ?

  • @tainepentecost6510
    @tainepentecost6510 4 роки тому +1

    Do these work the same on Diesel engines

    • @tiaanhildebrand1110
      @tiaanhildebrand1110 3 роки тому

      It will work...im just wondering if thjs damages the engine

    • @atrabanefiltruota
      @atrabanefiltruota 3 роки тому

      @@tiaanhildebrand1110 no if adjusted correctly, most tdis have vnt turbos, so that would be one of the problems by itself

  • @elieelias6071
    @elieelias6071 Рік тому

    I have Daihatsu sirion Can you install this without turbo ?

  • @Very-Good-GamerZ
    @Very-Good-GamerZ 4 роки тому +1

    Hey Do its worke on a car with out turbo on ?

  • @EvoLAtiR
    @EvoLAtiR 7 років тому +1

    Hello. Is is possible to install it on a vw golf 1.9tdi? If it is, where is the place? And do I need to do anything about MAF? I heard that it makes MAF sensor give some errors on fuel readings.

    • @gueroooson2614
      @gueroooson2614 6 років тому

      Fábio Morais you can install a blowoff valve on any car tht has Turbo

  • @williamrissetto
    @williamrissetto 2 роки тому

    Can you do this on any car ?

  • @studentofknowledge3367
    @studentofknowledge3367 8 років тому

    Will that be the same procedure for a mk2 golf gti ?

  • @TublinMedia
    @TublinMedia 7 років тому

    How is the quality? Does it still work?

  • @vichux86
    @vichux86 8 років тому +3

    Is installation is same for tdi engines?

  • @matbovis3857
    @matbovis3857 3 роки тому

    When I did it my car cuts off soon as it blows any suggestions

  • @kurtvella9709
    @kurtvella9709 5 років тому +1

    Is it the same on a mk5 1.9 tdi 2004?

  • @TrackItYT
    @TrackItYT 8 років тому

    For those clips you need CLIC pliers, easy when you get a pair

  • @riickization
    @riickization 7 років тому

    Ola boa tarde amigo! gostaria de saber onde vc comprou essa valvula? se foi na net ou em uma loja onde vc mora!?

  • @HerrPlumbum
    @HerrPlumbum 8 років тому

    U hav a realy nice Golf 4

  • @ibo1137
    @ibo1137 8 років тому +3

    Does this make you lose power?

    • @culticsmeh4531
      @culticsmeh4531 8 років тому

      in theory, no. However, if your air/fuel ratio is off, you've gotta take care of that.

    • @megstuporno
      @megstuporno 8 років тому +2

      And it will be off because your MAF already counted how much air went in and you bleeded it so you will have rich fuel..

    • @jasonmateus924
      @jasonmateus924 5 років тому

      @@megstuporno diverters should be replaced by diverters.. I wonder however if its THAT bad. I would personnally tighten it up close to the point where you get blowback

  • @halationmedia
    @halationmedia 9 років тому +1

    How do you get the skipping blow off valve that allt of r34 has?? Its difficult to write in text haha

  • @AB-ng7zc
    @AB-ng7zc 8 років тому

    ok no adjustment is for setting how much pressure is going back to system and how much is vented out

    • @AB-ng7zc
      @AB-ng7zc 8 років тому

      just love it when some one makes vid without having any idea on subject

  • @CARaCARtal99
    @CARaCARtal99 8 років тому +1

    Can i have dump valve in my 1.4 tdi bnm?

  • @michaelkennedy8573
    @michaelkennedy8573 8 років тому

    If the mas is before the blow of valve, will this not cause the engine to believe there is more air than there really is?

    • @darrenbush2279
      @darrenbush2279 7 років тому

      Michael Kennedy no bc the ecu and maf is already programmed for the air to recirculate from the factory. Vw dont put bov. they use recirculation valve which sends the old psi back into the turbo inlet pipe.

    • @darrenbush2279
      @darrenbush2279 7 років тому

      oh 8 years as a certified tech any questions just ask

  • @limagalvao6972
    @limagalvao6972 3 роки тому

    Doesn't this need to be installed the other way around? Like the Forge valve

  • @catalindragomir2463
    @catalindragomir2463 8 років тому

    its also working on benzin cars??? for example a seat 1.4mpi 2001

  • @tattedthickummz4532
    @tattedthickummz4532 5 років тому +1

    I HAVE A 02 1.8T JETTA WITH STAGE 2 TUNE && ONE I SHIFT OUT OF 1ST INTO 2ND IT THROWS IT INTO LIMP MODE CAN YOU PLEASE HELP

  • @jeanleletnam2634
    @jeanleletnam2634 Рік тому

    I have the Same but all light are on? Hoe to ajust?

  • @ΑθανάσιοςΘυμιόπουλος-π4δ

    Hi sir, what’s your blow off valve..can you send me a link?

  • @Reptile1997
    @Reptile1997 2 роки тому

    works for a 2016 diesel? (dci)

  • @shirazselemane5637
    @shirazselemane5637 6 місяців тому

    the air pipes of my airtrek are wider in diameter. What to do?

  • @samt6021
    @samt6021 4 роки тому

    this might be a stupid question but will i loose any power doing this? haha

  • @victorj4932
    @victorj4932 4 роки тому

    Hi bro. is it possible to fit HKS SSQV4 on 1.8 L 4G18TDB turbo I4 (petrol)? need information for this, would really appreciate it :D

  • @GravityContentCreator
    @GravityContentCreator 7 років тому

    do you know where the location would be for a VW Polo 2008 1.4 tdi?

  • @samartz
    @samartz 8 років тому +4

    Has anyone tries this on a mk6?

  • @alenkahriman4068
    @alenkahriman4068 8 років тому +6

    any vids for a 1.9 tdi

  • @jamescruzat158
    @jamescruzat158 3 роки тому +1

    Is it okay to install BOV on a non turbo car?

  • @MRkamz1
    @MRkamz1 8 років тому

    does anyone know where the original valve is on a 2012 astra, I think I found it but it either only has one big hose going into it or there isn't a small hose on it and I bought the same dump valve like the one in the video

  • @minibotpc
    @minibotpc 8 років тому

    I got the same one as this yesterday, however the piston catches on the o-ring on the inside of the dump valve. You can push it in by hand with some force but you can hear it click, its not smooth like my baileys bov. Any fix for this? It doesn't work either...

    • @walet6662
      @walet6662 8 років тому

      Putting some grease on the piston helps a bit for a while but eventually the piston will stick again.I also get the feeling that it opens as you build more boost so its leaking.I've had the same bov but i putit away for now and installed a hks.This one sounds amazing though if it works..

  • @stelioscullhaj3971
    @stelioscullhaj3971 5 років тому

    Can I install on my Nissan navara d40 diesel???

  • @patphelan8745
    @patphelan8745 6 років тому

    Instant boost leak fitted that way..

    • @kamrongeorge807
      @kamrongeorge807 4 роки тому

      I just got one today should it be flipped around?

  • @stevenfazio6579
    @stevenfazio6579 8 років тому

    so question about it, is it waterproof?...

  • @officialdarkwolfgaming3395
    @officialdarkwolfgaming3395 5 років тому

    😂😂dude,worng way..you make me confuse and just like i wanna eat you cause i haven't eat yet from yesterday night and just about to fix it right my car😂😂

  • @aliendisco12
    @aliendisco12 7 років тому

    Do you think this Bov would work on a bmw 335i twinturbo n54 engine with an aftermarket chargepipe ???? Thank you

    • @N54-i7c
      @N54-i7c 5 років тому

      Did you get one fitted in the end?

  • @migselv16896
    @migselv16896 7 років тому

    Is it true that a stock engine will loose a little bit of power after instaling one of these?

    • @stealthjuni
      @stealthjuni 4 роки тому

      The engines are expecting the recirculating air to run properly so at idle it set bad your idle will play and after boosting and releasing gas u might fal into motor safety the set it to recirculate not to blowoff

  • @ZARRO3000
    @ZARRO3000 8 років тому +1

    esa válvula esta mal puesta va atreves co la respiración asia arriva

  • @karimnassif6342
    @karimnassif6342 6 років тому

    can i install a bov in a normal car or it should have a turbo ?

    • @BMACCARMODS
      @BMACCARMODS  6 років тому

      Only on turbos

    • @roco9063
      @roco9063 5 років тому

      If you have diesel or a big engine you already must have a turbo

  • @thomtm5952
    @thomtm5952 5 років тому

    how many laps makes noise?

  • @yayowhores9711
    @yayowhores9711 9 років тому

    Where do I buy this for the same car ??

  • @ReskyTuni
    @ReskyTuni 3 роки тому

    It took 8 months shipped from China!?

  • @official6tone322
    @official6tone322 5 років тому

    Was it loud?