Why all the hate for the music??? Just hit mute if you don't like it - sheesh!! For me, it was a 'fun trip down nostalgia lane' while watching a young man taking FAR better care of his equipment than 99 percent of us would ever bother to do.... kudos!
Thanks for this. Been using my saw for a few years and did some re-sawing from a dust collector malfunction. Then my blade would not go down and his video gave me the info to solve my problem!
To think when I started to dismantle my saw I was at the beginning of an acid trip. Half way in gave up and started watching the labyrinth with David bowie. Now I'm here.
I going to do this to my set up tomorrow .I build custom watch boxes . Simple but elegant to see a Rolex in a natural setting like wood . Different shades of wood .
I have the same model and the bevel lock (red lever on the front) is frozen. It will not budge. I’ve tried WD40, I’ve tried clamps to apply more pressure to the handle than I could exert with just my hands, and nothing. The blade is stuck at 90°. Any idea how I can get it unstuck?
@@timber715 Awesome thanks, i just found the owners manual page 38 goes over the Dado. I have been using your method of cleaning my saw for several years now. That Johnson wax makes everything work beautifully!!! Thanks for your content!!!
I'm not sure about the wisdom of putting grease and oil on the height adjustment parts. Grease and oil just attract the dust and chips that cause height adjustment binding. I'll reluctantly try it. Can always clean it off I guess.
I would rather play music for more people to understand than talk in my native language. Gordon, I think this video is more informative and less dragging than what you did with your brocolli.... Which I watch for 10 seconds.
I really needed to see a video on how to maintenance this exact saw (because I have one). I can't watch it because of the music, though. Would it be possible for you to explain what you're doing instead of just showing what you're doing? Thank you.
The music is crap (remember that it is a matter of taste and your taste may not be everyone's) but can be muted so I don't care. Unfortunately the font you chose is really bad and difficult to read. ...but it is your choice, so I don't care if you are arrogant to your viewers and don't take criticism seriously.
I have been making this chili oil for 2.5 years and I love it. Thank you for sharing this recipe.
Why all the hate for the music??? Just hit mute if you don't like it - sheesh!! For me, it was a 'fun trip down nostalgia lane' while watching a young man taking FAR better care of his equipment than 99 percent of us would ever bother to do.... kudos!
Great music choice, made my day! 😎😁
Thanks for this. Been using my saw for a few years and did some re-sawing from a dust collector malfunction. Then my blade would not go down and his video gave me the info to solve my problem!
To think when I started to dismantle my saw I was at the beginning of an acid trip. Half way in gave up and started watching the labyrinth with David bowie. Now I'm here.
I going to do this to my set up tomorrow .I build custom watch boxes . Simple but elegant to see a Rolex in a natural setting like wood . Different shades of wood .
Thanks for posting this, it is a great saw, and it would be nice to make it last a long time.
Loooove tears for fear shout shout ✌🏼✌🏼✌🏼✌🏼let it all out 🥳🥳🥳
Thank you for posting. Can you post a video on how to lubricate the gears and bearings of the motor please ?
to align the blade to the miter slots you need to loosen the screws that hold the table top.
well done. Music fine with me... Headed to the garage to clean/tune mine..
thanks
Awesome video. Love the 80s remix!
A simple solution is to lower your volume...
Awesome, Thanks
Is there actually any tune up information here?. I did not see it.
giuseppe, I used two kinds of wax. Johnsons pate wax for floors and renaissance wax from amazon....
Love the music! Really nice video.
Thanks for this
You see how he can turn the wheel to get the blade back up? Yea, well, I can't do that. I have to turn it upside down. Can someone help me?
I have the same model and the bevel lock (red lever on the front) is frozen. It will not budge. I’ve tried WD40, I’ve tried clamps to apply more pressure to the handle than I could exert with just my hands, and nothing. The blade is stuck at 90°. Any idea how I can get it unstuck?
Sorry I no longer have this with me for some time already.
Awesome!!! Can you put a Dado stack on this particular saw??
Yes you can and yes I myself use dado stack on it.
@@timber715 Awesome thanks, i just found the owners manual page 38 goes over the Dado. I have been using your method of cleaning my saw for several years now. That Johnson wax makes everything work beautifully!!! Thanks for your content!!!
Nice video sir!did you buy your table saw here in Philippines or was it imported? thanks
What kind of wax are you using for table top
I just use johnsons wax...
long time i haven't heard this song so the music didn't bother me at all lol
Good video video but I must admit I was paying a lot of attention to the music too!!
which wax did you use for the fence and table?
I used Renaissance wax for the table and fence... but Johnson's wax would be a good cheap alternative too.
I imported the 4100 from the US Jr...
I'm not sure about the wisdom of putting grease and oil on the height adjustment parts. Grease and oil just attract the dust and chips that cause height adjustment binding. I'll reluctantly try it. Can always clean it off I guess.
I use dry graphite here for this reason
I would rather play music for more people to understand than talk in my native language.
Gordon, I think this video is more informative and less dragging than what you did with your brocolli.... Which I watch for 10 seconds.
I really needed to see a video on how to maintenance this exact saw (because I have one). I can't watch it because of the music, though. Would it be possible for you to explain what you're doing instead of just showing what you're doing? Thank you.
Good! But... you forgot to drain all the old electricity out of the power cord and install new electricity.
а я думал куда делась моя зубная счетка ?1:45
Thankfully I have a mute button. I'd much prefer you tell us what you're doing than listen to music that is more of a distraction.
Hey, no fears, no tears
You can mute it and play your own music instead. Video shows all that needed to be said, no need for some monotone narrative to bore the rest of us.
mute is good
hahahaha
Can the music. I *like* this music, but it's a major league distraction from the task at hand.
The music is irritating and distracting!
try NARRATION instead of crap music!!!!!!!!!!!!!!!
wa4aos Actually I only watched this BECAUSE of the music.
What is going on here. Does no one speak anymore. The music stinks so I just leave this crap and move on.
Please just talk or turn off music. Sometimes just playing normal sounds can help folks better understand what you are doing.
No real maintenance in this video, boring music no narration. Skip this one.
The music is crap (remember that it is a matter of taste and your taste may not be everyone's) but can be muted so I don't care. Unfortunately the font you chose is really bad and difficult to read. ...but it is your choice, so I don't care if you are arrogant to your viewers and don't take criticism seriously.