instant pot after replacing temperature sensor still haveing error.C6L

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • Replace the temperature sensor still having the C6L error remove the glue from on tip of 1 sensor with black wire. use a small flat head screw driver and adjuster turn it anti-clockwise until here click and try again.

КОМЕНТАРІ • 26

  • @SusieHinton
    @SusieHinton Місяць тому

    Awesome help, thank you! Just replacing the sensor didn’t work for me. I had to do the additional adjustment to the sensor screw. Works great now! Best video for this repair!

  • @JohnBob0
    @JohnBob0 Рік тому +2

    Thanks a lot for helping me out. I just fixed mine by following your video. I had to buy a new pressure sensor too.

  • @Sahasra2012
    @Sahasra2012 Рік тому +4

    Thank you so much for the info, It's working for my instant pot

  • @dixsigns1717
    @dixsigns1717 2 роки тому +2

    Thank You I watched a lot of videos - you are the only one that explained it!

  • @brentlarson1587
    @brentlarson1587 Рік тому +2

    Thank you! This exactly what I needed.

  • @stingrayshark9373
    @stingrayshark9373 Рік тому +4

    That's the pressure sensor, not the temperature sensor.

  • @drcoolit
    @drcoolit Рік тому

    some people get a "burn" error on the instant pot --- is that the same thing as the C6L error? some people have reported that identical recipes act differently in 2 identical IP pots, one gets the "burn" error, one doesn't. your video shows that there IS some adjustment that can be made to this temperature sensor that removes the C6L error -- would that also have an effect on the "burn" error issue?

  • @GhostsOfSparta
    @GhostsOfSparta Місяць тому

    That is a pressure sensor, right?

  • @nvidiasniper
    @nvidiasniper Рік тому

    Thank you, thank you, thank you

  • @brittanywhite4009
    @brittanywhite4009 6 місяців тому

    Hello! I am having the same C6L error as well, and I am looking to trying your fix. I wanted to ask does the instant pot have to be plugged in when this is done? Will you still hear the “click” if it isn’t plugged in? Just asking more so for safety concerns.

    • @electronicartis
      @electronicartis  5 місяців тому

      this option is only if replace the temperature sensor and still have the error however need to turn the pot off and remove the glue safely to avoid to not touch other parts it need an electrical insulated small screwdriver to do this adjustment with the power on however that's the best way I find it to work recommended to get this done by someone with electronics knowledge. this is a dangerous process I do not recommend if you don't know what you are adjusting.

  • @ボリヴァ
    @ボリヴァ Рік тому

    I have this error. I just bought the parts from amazon and it said no adjustments needed. But i noticed from the old part and new one that when i install it the side with black wire is touching the adjuster screw, while the red wire side is slightly away from the screw... is this proper? Thanks.

  • @suzannemiller7044
    @suzannemiller7044 2 роки тому +1

    where to buy the part? Mine just went out....Thanks

    • @MacGregor9488
      @MacGregor9488 2 роки тому

      ZoneFly Original Pressure Sensor for Instant Pot, Pressure Sensor or Switch for Power Cooker/Cuisinart/Farberware/Power Quick Pot/Crock-Pot Electric Pressure Cooker Pressure Sensor or Switch a.co/d/3rHHB99

    • @electronicartis
      @electronicartis  2 роки тому

      I purchased mine on eBay.

  • @laurentiugarofeanu1207
    @laurentiugarofeanu1207 9 місяців тому

    Hi, i have an Instant Pot duo crisp + air fryer error code c6h/ c6l. It appears even after replacing the pressure sensor you suggest doing plus adjusting the dial above it. My error appears when i insert the pot inside,, otherwise it's set to OFF. Any suggestions what might be the cause and a possible solution?

  • @georgeheinig2382
    @georgeheinig2382 Рік тому +1

    So, you're calibrating the sensor. Anyone else concerned this might allow the pressure to go dangerously high?

    • @electronicartis
      @electronicartis  Рік тому +2

      Hello I do not know of any tools that instant pot or anyone else has provided to do this sort of calibration however I clearly stated soon as you hear the click that will fix it use a little common knowledge to know when to stop. it's a dangerous way to get this fixed but it's the only way I found I do not recommend it but it's the last option no one else has explained it when they replace the sensor.

    • @georgeheinig2382
      @georgeheinig2382 Рік тому +1

      That's reasonable. Thanks.

    • @akquicksilver
      @akquicksilver Рік тому

      That's why there is a pressure relief valvle incorportated in the vent. I suppose the relief valve could fail, then of course, in Anerica, it is now litigation time.

  • @gwenniegirl50
    @gwenniegirl50 Рік тому

    I gave this a thumbs down👎 because of background noise that was distracting and made it hard to hear and understand what was being said.

    • @electronicartis
      @electronicartis  Рік тому +2

      Hello appreciate your feedback. The video is not for entertainment purposes it's just a share an idea of what I found out. on a repair After replacing the part and still get in the same problem. This should be the last option try this at your own risk.

    • @ボリヴァ
      @ボリヴァ Рік тому

      Rediculousness is all over your feedback.

    • @electronicartis
      @electronicartis  Рік тому +1

      @@ボリヴァ it's ridiculous but the technique works. It's the same instant pot Cooks everyday.