Instant Pot C6 error fixing
Вставка
- Опубліковано 25 сер 2024
- Learn how to fix the Instant Pot C6 error in this step-by-step tutorial! The error is caused by a malfunctioning pressure sensor, and in this video, I'll show you how to locate, remove and replace it with a new one. Watch and follow along as we guide you through the process of opening up the pot, finding the sensor and completing the replacement. By the end of this video, you'll be able to troubleshoot and repair your Instant Pot with ease. Don't let the C6 error hold you back from cooking delicious meals! Watch now.
Thank you! I followed your instructions, and it worked perfectly. My Instant Pot is back in service. I got the part on Amazon, just as you said. It was delivered in a few days, and the Instant Pot is like new. thank you so much!
Very thorough explaining everything so that I have no questions. After I removed the sensor I tested for clicking and sure enough one of them was not clicking. I examined the part with a flashlight and saw that one of the contacts of the sensor under the one of the flexible stainless strips looked like it had burned out and it looked as if it had disintegrated. I'm about to order the new part and it kept my very old IP (like 2014) from going in the landfill. Thank you so much!
I have this exact model and issue with the leads on the pressure tip breaking off and must say that it is one of the most used appliance in the house. Hopefully I can get another 5 years out of the new sensor lol. Thanks for sharing.
Clear and to the point. That part from Amazon will arrive in a few days to fix that C6 error. Thank you.
Follow - up : instant Pot totally back to its normally working after following your video. In fact Im eating the cooked rice using the repaired Instant Pot. Thank you very much
Can you share the Amazon link of that sensor pls
Amazon link please
@codywifi149 I must confess that I don't have that link but just type the model and pressure switch. It should show you.
@manuelmoraleda9684 thank you the problem with my instant pot was the rubber gasket from the floater pressure valve my wife put it backwards lol
can you share the link? where you got may be amazon ?
Hi, pls can you share a link for the sensor on Amazon? Thank you.
Thank you, your video was very helpful, I only had to clean the sensors.
Thanks! I’m going to try this and salvage my kitchen BF.🙂
Thank you for the wonderful explanation.
Glad you liked it
Thank you so much for your video. My pot made that beeping noise a few minutes ago. What on earth!!!!!!
No I know and will order a new part today.
Glad I could help!
Just replaced my pressure switch after 4 years of continuous use and I had to adjust the switch down 6 times (1/4 turn CCW at a time) to keep it from overpressuring.
The best way to adjust the switch if it over pressures is to run it in clockwise with the power on. When you get the C6 code, back the adjustment out until the C6 code stops and you are good to go. IN my previous statement I said CCW, I meant clockwise, sorry,
Very helpful thanks.
Thankyou for detailed video, mine just got fixed and working great. 👍😃
first. clean sensor part . and re assemble. it works for me.
Well done. Thanks for the video.
Thanks for the help
I need de link please
What should I do when the indicator shows Lid even after closing the lid properly
I have too much pressure but no errors. The steam release valve leaks, telling me there's too much pressure for the knob (weight) to seal. I bought a new knob. Same thing.
Hello. Do you have access to technical information about instant pot max? I'm having error E19 and i don't know what it mean. Thank you. Regards
Great!
I used instant pot to make hard boiled eggs and then powered it off. The unit started beeping with C1 error code. Unit is almost 5 years old. Is this likely same sensor?
What’s the name of the sensor because I have exactly the same problem
Name the Sensor please, I from Panama
Anyone know if c6 and CP6L are the same error? Or if you have 3 different sized pots do they all take the same sized sensor replacer?
The C6, C6L, and C6H errors are all related to the pressure sensor isn't working properly; the the pressure sensor might be vary across different models
If after replacing the sense and you still get the error what else to check.
It has to be calibrated
@@battery0peratedlover how do you calibrate it.
@Electronic Artis I've been trying to find the answer, but coming up short.
@@battery0peratedlover I found this help to make it work however if you could put a better explanation to that video it will be helpful thank you this is the link. ua-cam.com/video/jNb_oQW5moE/v-deo.html
@Electronic Artis seems pretty easy to follow but given that the screw is a gage to elevate or drop the temp idk what temp it should be set to.
Es una lastima que no este traducido al español
How can I fix Error 3
Error 3 on an Instant Pot is usually caused by a failure in the pressure cooker's temperature sensor. try performing a factory reset on the pressure cooker. To do this, press and hold the "Keep Warm/Cancel" button for 3 seconds until the display shows "0:00."
You'll need to recalibrate the sensors, otherwise it may not work properly
How do you do that?