Thanks you for watching the latest episode of the steam engine build! Don't for get to hit the Like button, make sure you've subscribed so you never miss an episode on the channel, and don't forget to share this with your friends! 👍🚂Laters!
That's it I've caught up. Next one please. You have certainly done a super job on those cylinders. I can't wait to see them fitted on the chassis. Many thanks Matt for yet another wonderful vlog. - Fletch -
Thanks Jeff, much appreciated. I've been busy with the business and the job I'm doing on the loco is taking a little bit longer than I expected, all will be revealed...... eventually 😂. All the best, Matt 👍
Hi Matt. Great to see the ‘power’ bits assembled. Nice, neat work on the studs too 👍 For deburring and ‘finishing’ stud ends, I use an ‘external’ chamfer bit ( internal cone with 3 or 4 carbide cutters. Saves chucking them all up. Also, I’ve seen visible studs slightly ‘domed’ to add some extra ‘bling’. Regards Robert
Thanks Robert, much appreciated. Good shout on chamfer tool, thanks. Domed studs??! life is to short for that 😂😂 especially when you may not see them. All the best, Matt 👍
You and me both! 😂. Well hopefully the next update won't be that long behind.... as I've been very busy behind the scenes and its taken longer than expected! All the best, Matt 👍
Hiya Matt. Brilliant to see your latest video where you rub salt into the wounds of those who's build has stalled! If you ever get down to sunny Somerset, remind me to give you a Coventry Die Head and a selection of cutters. Will make your life much easier. You will need to make an adaptor to allow you to mount it off your cross slide. In steam by Christmas then!🤓
Thanks Grum, much appreciated as always. Coventry die head?? they still a thing 😂😂. I may have steam by Christmas.... just which one is the debate! 😂😂. All the best, Matt. 👍
Thanks Paul, much appreciated. Although the build videos have slowed, there is a reason and this will be revealed hopefully sooner rather than later! All the best, Matt 👍
Hi Matt, thanks for another great video. I couldn't help but notice the wedding ring while you're machining, I don't cos I've seen how unpleasant a degloving is.
I think that may take my OCD over the top…. I’d have to have them all at the same position…. Although that may look good in a particular way!! 😂😂. All the best, Matt 👍
Thanks you for watching the latest episode of the steam engine build! Don't for get to hit the Like button, make sure you've subscribed so you never miss an episode on the channel, and don't forget to share this with your friends! 👍🚂Laters!
Making all those studs must have driven you nuts!
🤣🤣🤣🤣🤣🤣
That is an awful pun 😂😂😂😂😂
It’s great seeing this beautiful loco come to life! Great work 🛠🚂
Thanks for the kind words Trainbuilder, much appreciated. All the best, Matt 👍🚂🚂
That's it I've caught up. Next one please.
You have certainly done a super job on those cylinders. I can't wait to see them fitted on the chassis.
Many thanks Matt for yet another wonderful vlog.
- Fletch -
Thanks Fletch, I can’t wait to see them fitted either!! Hopefully won’t be too long before next episode is out. All the best,Matt 👍
Looking great Matt. Nice to see you back in the workshop.
Thank you 🙏. All the best, Matt. 👍
Outstanding Matt!!! Glad to see you back in the workshop again... It's been too long!
Thanks Jeff, much appreciated. I've been busy with the business and the job I'm doing on the loco is taking a little bit longer than I expected, all will be revealed...... eventually 😂. All the best, Matt 👍
nice one Matt
keep on keeping on👍👍🚂🚂
laterzzzzzzzzzzzzz
Kev
Ey up Kev, as always thank you, hope your well my UA-cam friend. We will get there in the end…..eventually! 😂. All the very best, Matt 👍🚂🚂🚂.
Hi Matt.
Great to see the ‘power’ bits assembled.
Nice, neat work on the studs too 👍
For deburring and ‘finishing’ stud ends, I use an ‘external’ chamfer bit ( internal cone with 3 or 4 carbide cutters.
Saves chucking them all up.
Also, I’ve seen visible studs slightly ‘domed’ to add some extra ‘bling’.
Regards
Robert
Thanks Robert, much appreciated. Good shout on chamfer tool, thanks. Domed studs??! life is to short for that 😂😂 especially when you may not see them. All the best, Matt 👍
Looking great Matt, can’t wait until you get these fitted, it’s all coming along very nicely 👍🏻
You and me both! 😂. Well hopefully the next update won't be that long behind.... as I've been very busy behind the scenes and its taken longer than expected! All the best, Matt 👍
Hiya Matt. Brilliant to see your latest video where you rub salt into the wounds of those who's build has stalled! If you ever get down to sunny Somerset, remind me to give you a Coventry Die Head and a selection of cutters. Will make your life much easier. You will need to make an adaptor to allow you to mount it off your cross slide. In steam by Christmas then!🤓
Thanks Grum, much appreciated as always. Coventry die head?? they still a thing 😂😂. I may have steam by Christmas.... just which one is the debate! 😂😂. All the best, Matt. 👍
Beautiful work as always. I was excited to see a loco build video land!
Thanks Paul, much appreciated. Although the build videos have slowed, there is a reason and this will be revealed hopefully sooner rather than later! All the best, Matt 👍
@@MattChiversWorkshop oooh exciting!
Hi Matt Cylinders do look good.
Thanks RB, yes they are really beginning to look the part now. All the best, Matt 👍
Hi Matt, thanks for another great video. I couldn't help but notice the wedding ring while you're machining, I don't cos I've seen how unpleasant a degloving is.
Thanks Paul. Yes I've seen it too, problem is I'd have to cut the ring, it won't come off without help!! All the best, Matt.
Looking Great Matt
Thank you, much appreciated. All the best, Matt 👍
Thanks for sharing 👍
As always Craig, Thank you for watching and supporting the channel. All the best, Matt 👍
Coming on very well mate. My boss wouldn't give me production work because he knew I hated it lol
Thanks Dermot, much appreciated. Yeah don't think I'd enjoy making those for days on end 😂. All the best, Matt 👍
@@MattChiversWorkshop I mean if it was only 10 or so. I call that production lol
@dermotkelly2289 so anything over 1 then?! 😂😂
@@MattChiversWorkshop Well????2
🤣
Nice work. I feel like square nuts might offer a more interesting aesthetic.
I think that may take my OCD over the top…. I’d have to have them all at the same position…. Although that may look good in a particular way!! 😂😂. All the best, Matt 👍
Why not go for acorn nuts?
Wrong time of season for acorn nuts….. 😉😂
@@MattChiversWorkshop I use them on my engine, they look the part and are easily available.
Looking forward to more of the same! Subbed here for sure!
Many Thanks 🙏 really appreciate the sub and comment. All the best, Matt 👍
Looks awesome
Thanks Rick, yeah they really are looking the part now, can't wait to get these bolted to the frames! All the best, Matt 👍
Looking great. thx
Thanks Alan, much appreciated as always and thank you for supporting the channel. All the best, Matt 👍
Very nice work sir
Thank you, much appreciated 🙏. All the best, Matt 👍
So you're using the tail stock like an end stop🤔
Ohh yes 👍. All the best, Matt.
Why didn't you bring them to project night?? Not seen them at this stage
😂😂….. now what was that comment you made earlier about narrow gauge?!? 🚂🚂🚂
@@MattChiversWorkshop I appreciate the engineering and parts. Just not when they are all put together 🤣
🤦🏻♂️😂😂😂