DIY Tractor Forestry Winch | Easy & Works | 10,000lbs!

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ •

  • @Army_THE_TACSOP
    @Army_THE_TACSOP 7 місяців тому +2

    Honestly followed because this is the type of thing I do. Never once had my wife say your a genius so proud like that. Lucky man!

  • @ironsales5669
    @ironsales5669 3 місяці тому

    Thanks for the video. I only stayed to 1:55 because you answered all my questions. Only thing I did not see was an inline fuse? It might be in the video? Anyway I loved that you wife gave you props, that always feels good when you wife supports you and recognizes the things you do. Cheers to you.

  • @janking2762
    @janking2762 Місяць тому +1

    If you can add some snatch blocks to your cable, you will greatly reduce the load on your winch and increase the pulling capacity.

  • @josephvance9759
    @josephvance9759 Рік тому +1

    Man - you just saved me a few thousand dollars . I was going to buy a forestry winch implement! Great job

  • @jimpatterson7381
    @jimpatterson7381 8 місяців тому +2

    Thats EXACTLY what I have been wanting to do. Just needed a little "nudge" in the right direction.

    • @CollinsCountry
      @CollinsCountry  8 місяців тому

      +@jimpatterson7381 haha good! Do it. We love it! This cheap little winch has worked well for us!

  • @philsulzberger7018
    @philsulzberger7018 Рік тому +1

    Excellent system. Maybe a short snubber from frame anchor point to the chain hook on the log to take out any jerking motion on the winch hub while towing. Winches can suffer damage if towed for long periods on the hub alone. Great vlog once again.

    • @CollinsCountry
      @CollinsCountry  Рік тому

      +Phil Sulzberger Note taken. Thank you for the tip!!!! :)

    • @MrPiEater
      @MrPiEater Рік тому

      I second this! a few grab hooks welded to the hitch frame will let you drop the hitch low, chain up a few logs you have pulled in, hoist them with the 3 point and keep from smashing the bearings / bushings in that winch. I replaced multiple bushings inside a Warn ATV winch after abusing it as a drag point instead of using chains. It's not a fun job, assuming you can get the parts...

  • @coypatton3160
    @coypatton3160 9 місяців тому +1

    On addition that wold reduce stress on the tractor while winching is an anchor of some sort.
    If I built one, I would start with a a market place grader blade, buy a receiver hitch tube and weld to the blade frame. Add in a D ring or 2 for dragging logs or build an arch and make a second trip. But great ideal on the winch build.

    • @SetitesTechAdventures
      @SetitesTechAdventures 6 місяців тому

      Great idea. I just got a rusty grade blade as a bonus with a discer I got at auction. I'm trying to unseize it but even if I can't your idea will save me some money.

  • @SetitesTechAdventures
    @SetitesTechAdventures 6 місяців тому

    Can this setup be used to pull saplings the smaller trees fromt he ground? You ahve a lot of small trees like I do and I found your video looking for a way to hook a winch to my tractor for yanking them out. I was thinking maybe adding some sort of bracing that can dig intot he ground so the tractor doesn't move.

    • @CollinsCountry
      @CollinsCountry  6 місяців тому

      I would say this would rip a small sapling out. Next time I hook it up to tractor I’ll try it out!

  • @FatherOfTheParty
    @FatherOfTheParty Рік тому

    Great project! Thanks for sharing!

  • @barney1941
    @barney1941 10 місяців тому +3

    better put a huge fuse or circuit breaker by battery

  • @pmartialburguieres5007
    @pmartialburguieres5007 9 місяців тому +1

    Just a comment, but I'd weld (if you weld) a heavy D ring on the mount. Once you get a log winched in, attach the choker or chain directly to the mount and relieve the winch of the load. Your winch and winch line will last WAY longer.

    • @CollinsCountry
      @CollinsCountry  9 місяців тому +1

      That’s a great idea. I will be doing that.

  • @mikebelcher6692
    @mikebelcher6692 9 місяців тому

    Just what I was looking for. I was wondering if something like this bolt to my work platform on rear of tractor.
    Thanks for all the details.

    • @CollinsCountry
      @CollinsCountry  9 місяців тому

      +@mikebelcher6692 No problem! This has worked well for us. Hopefully it does for you too

    • @janking2762
      @janking2762 Місяць тому

      I bolted a small winch to a trailer ball hitch and put it into the 2” receiver mounted onto to the tractor frame.

    • @mikebelcher6692
      @mikebelcher6692 Місяць тому

      @ awesome, sounds like an excellent mounting way. Thx

  • @DonaldVautour
    @DonaldVautour 9 місяців тому

    i have a similar set up but the winch is on my trailer (hitch area), , eventually your gonna burnt out your winch, you could try to pulling out the log to the road with a different cable with pulleys using your tractor and using your winch to lift it up to add a chain afterwards to hold it up,,,. a lot faster and will save your winch.

  • @MartimCapela-wf7fi
    @MartimCapela-wf7fi Місяць тому

    Com um trator tão grande porque não usa um guincho hidráulico?

  • @HammerHead524
    @HammerHead524 Рік тому

    I’m breaking my rule and skipping way way ahead to see this one real quick. I think I’m on the video that is 7 month pregnant deer hunt maybe …..😅

    • @CollinsCountry
      @CollinsCountry  Рік тому +1

      +Marcos Acosta haha. Oh yes. That was such a fun hunt! I couldn’t believe I got a buck early in the morning. I knew I wouldn’t be able to sit there all day with that big belly ha. So I’m blessed that we got a dear early!!!!!!!!