Top notch job as always! The Legend is a performer no matter what settings you have, it will find it! I dance around every target I get to hear it at all angles. The Legend picks put nonferrous targets in iron so well! Wicked happy hunting 👊
Another good field test of the Nokta with v1.11. I have seen the results of the snow that came your way so you were lucky to get out. The versatility of the Legend is great. It is so hard to find a perfectly set up machine and shaft, there is always something!
As you said nowt special in finds but you give 1.11 a go was it really that much different from the previous install hard to tell really listening to the sounds on videos , I’m finding the 1-11 much quieter not as sparky as the previous updates , I’m out tomorrow on pasture I’ll see how it does , good vid as always liam cheers
yes hits bigger and smaller targets conductors better , but because of the wave pattern doesn't penetrate the ground as far unless high mineralised ground then higher frequencies > lower frequencies
I was going to ask if M3 is deeper then the other MF? If I’m running in MF then I usually use M2 for the better separation. I’ve been using a lot of SF lately. Use 10 & 15khz the most. To get the absolute most depth regardless of setting you have to use what is your recommended set up for DEPTH alone? Just got my Legend LG24 coil in and it’s my go to, but I’m really wanting the LG30 or LG35. Which would you recommend?
@@jdnotariano I definitely already do both of those. In my area and soil I can literally run my sensitivity to 28-30 & sometimes in Multi, but it’s very smooth in 10-15khz. I would love to run in 4khz, but it drains the battery within minutes or a hour if lucky.
Top notch job as always! The Legend is a performer no matter what settings you have, it will find it! I dance around every target I get to hear it at all angles. The Legend picks put nonferrous targets in iron so well! Wicked happy hunting 👊
Like it! I dig all in this mode: No filters!
Another good field test of the Nokta with v1.11. I have seen the results of the snow that came your way so you were lucky to get out. The versatility of the Legend is great. It is so hard to find a perfectly set up machine and shaft, there is always something!
Great finds! The Legend really does give you a bang for your buck!
Liam my legend is still at 1.09 is it worth running 1.11? What are the benefits please still learning of course
Dean.
Keep learning us pal
As you said nowt special in finds but you give 1.11 a go was it really that much different from the previous install hard to tell really listening to the sounds on videos , I’m finding the 1-11 much quieter not as sparky as the previous updates , I’m out tomorrow on pasture I’ll see how it does , good vid as always liam cheers
Very good Detector
A good mixture of finds mate, thanks for sharing 👍
👍 включай подсветку на экране, когда показываешь настройки. Ничего не видно.
Recovery '0', no filters "bring it"! 😁
Thanks man as always great video
Cheers 🍻
Nice video. Have you tried adjusting the threshold, maybe get a little more depth?
Unless in goldfield then threshold is only reference threshold so no depth increase, true threshold in gold field is mega deep but only single tone 👍🏻
I enjoy your videos very much . always so educational. thank you.
Thanks and your very welcome
Great hunt
Oooh sexi someones gone 4K, shame my internet aint good enough to play it. Still no drone yet 🛸
Same , drone will have to wait lol money went on pc build , this vid with harsh colour filters took 5mins to export render , 45 mins to upload 💨
Yet again another very informative vid buddy, can you please do one for the simplex +cant afford the legend 😢😂, all the best regards Kelvin 😀 👍
check this one out kev ua-cam.com/video/xD8qE2DhSUY/v-deo.html
The M3 definitely works, but I find M2 usually “hits harder” on a wider variety of targets.
yes hits bigger and smaller targets conductors better , but because of the wave pattern doesn't penetrate the ground as far unless high mineralised ground then higher frequencies > lower frequencies
I was going to ask if M3 is deeper then the other MF? If I’m running in MF then I usually use M2 for the better separation.
I’ve been using a lot of SF lately. Use 10 & 15khz the most.
To get the absolute most depth regardless of setting you have to use what is your recommended set up for DEPTH alone?
Just got my Legend LG24 coil in and it’s my go to, but I’m really wanting the LG30 or LG35. Which would you recommend?
@@kody3377 for the maximum depth use a low recovery speed and the highest sensitivity possible.
@@jdnotariano I definitely already do both of those. In my area and soil I can literally run my sensitivity to 28-30 & sometimes in Multi, but it’s very smooth in 10-15khz. I would love to run in 4khz, but it drains the battery within minutes or a hour if lucky.
@@jdnotariano do you have the LG30 or LG35