How to Remove Steering Wheel 02-08 Dodge Ram
Вставка
- Опубліковано 18 вер 2024
- In this video, 1A Auto shows you how to remove, reinstall the streering wheel in a 08 Dodge Ram
🔧 List of tools used:
• No. 2 Phillips Screwdriver 1aau.to/oJ3/1AX...
• 10mm Wrench 1aau.to/ohd/1AX...
• 10mm Socket 1aau.to/oyT/1AX...
• T15 Torx Driver 1aau.to/oiC/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ofi/1AX...
• Ratchet 1aau.to/oKJ/1AX...
• Torque Wrench 1aau.to/ok4/1AX...
For More Info visit us at 1aau.to/h/akQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Can't find the steering wheel on your website..
Leaving the steering wheel bolt installed a couple turns will help you not hit yourself in the face when the wheel comes loose as they often are stubborn and require some force to get loose.
My 2002 Dodge Ram 1500 SLT was much different when I replaced the clock spring. The two screw on the back of the wheel were holding on the cruise control switches. The air bag assembly had to be removed by removing two large Phillips head screws. There was one airbag wiring connector. The 13mm Bolt holding the steering wheel on the shaft was the only part that was identical to what you’re doing. Had to use a puller to remove the steering wheel off the shaft. Mine didn’t have the serrations, it had round with flat positioning sides so it could only go on one way.
Great job one of the best
Thanks very much for the video brother my steering wheel bolt was 13mm but I must have a relay gone cuz the intermittent wipers still don’t work but at least I have high and low lol
I got my wheel free and it started to come off and then stopped. I can still slide it on and off the spines freely but it won’t come off completely. It feels like metal hitting metal when it stops and everything is unbolted as it should be. Any suggestions? Thank you!
The treaded holes in the wheel are for a steering wheel puller, are they not?
I have an 06 rt charger steering wheel i was wondering if it would mount up to my 08 ram steering wheel there the same size I just don't know how many splines the steering wheel has
Is it possible to have play at the wheel because I’ve replaced everything and I still have about a quarter inch or half inch of play in my steering I was gonn take the wheel off and see
I tapped my steering wheel off to the beat of Stayin Alive ah ah ah ah stayin alive definitely helps..
On a 2005 Ram, I needed a T-20 torx driver.
+Aaron Me Thanks for the tip! We'll pass this info along to our production team.
Am I able to put aftermarket steering wheel on my 04 dodge ram?
Yes Just disarm and remove the airbag and steering wheel then just replace it with which ever wheel you want Also a adapter kit will be required for the installation process however if you wish to retain the airbag sytem with a Aftermarket Wheel this will require a Aftermarket Wheel with a pre-installed airbag
have any on changing steering column on 2006 dodge caravan? or replacing ignition lock cylinder housing assembly?
+Justin Gibson We have an auto repair video that shows how-to replace the ignition lock cylinder. We currently do not have an auto repair video that shows how-to replace the steering column. Here is a video to the ignition replacement part and also a repair video. Hope this helps you out. goo.gl/bjGpxG
Excelente video!!
Quiero desmontar el volante de una RAM 1500 del 98
+Joel Zambrano Thank you for your feedback!
@@1AAuto Equally👍
How do you replace an ignition cylinder on a 2007 GMC Canyon?
We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
Thank you