Це відео не доступне.
Перепрошуємо.
Vacuum repairman shows how to replace belt(s) on Bissell Proheat 2X Carpet Cleaner
Вставка
- Опубліковано 17 сер 2024
- If this was helpful and you would like to send me a tip as a thank you: venmo @Brett-Magnuson-3
Instructions on how to replace belts on Bissell Proheat 2X carpet cleaner.
*Belt part numbers* Left side (motor drive side): 2036688, Right side (links two brushes together): 2036804
Interested in investing in a quality vacuum that can last you 20 years? Contact us directly at (321)454-3838 Ask for Brett
www.richardsvacuum.com
best directions ever! Bissell needs to hire you for us. 😊
lol thanks
Thank you, for a well made video. No wasted time, no stupid jokes, was going to send my Bissel out to re-assemble. But with your excellent instructions, i did it myself! Thank you so much, wish all DIY repair videos were this good.
thanks for the comment! lol I am glad I restrained myself on the jokes :P
Thank you so much! I was stumped for an hour and after watching your video I got it done in 5 minutes.
Wow that’s awesome! Thanks for sharing that
You are incredible! Thank you for such a wonderful diy video without all the fluff and unnecessary wasting of time. You rock! Subscribing for sure 😊
Thank you so much! I just deep cleaned and put my parents' Bissell back together! Thank you so much!!!!
Thanks you for sharing this video I’m stuck don’t know what to do! After washing your video I put everything back in place
My vacuum working good now thanks you so much 👍
Sir you are a life saver! I was given this same machine and found that the rollers weren’t moving! Was going to attempt to fix it but thought better of that and then found your video! Now I can do it and not get pissed off lol! Thank you sir!
Husband says thank you very much very easy step by step instructions job well done
Thank you sooooo much. Best video!!!
Thank you for diy video. Made changing belts easy.
Awesome instructions just showed me how to repair my machine👍
Outstanding video sir! I have one of these and the rollers weren’t moving, I had no idea what to do to fix the problem until now! Thank you!
Very helpful. Thanks
I did it. Thanks again.
Great video thanks
You r tha man!!!!
Thank you!...,
Ty
Thanks!
Welcome!
Hi! Great video! I have a Pro Heat 2x w: 2 in 1 tank (9200 model). I am not getting spray from the big tank to the floor (on rinse or soap setting) but hose attachment works fine for spray & suction. I cleaned all nozzles, tubes & even heater(which was pretty bad). Suction is fine, rollers spinning & machine is well maintained. Are there any connections that impact spray that may have wiggled loose during cleaning? I tried priming pump by turning on for 1 min & then using trigger but nothing happens. Any ideas would be greatly appreciated!
Most common issue is clogged heater. Sounds like you addressed that already. If heater is cleared then move to checking the sprayer tips and the solenoid valve
I have a question if you can answer. On my proheat 2x keeps breaking on left side smaller belt . Model 1383 I keep my cleaner very clean. No hair no strings nothing is stuck on the roller or any where . The belt breaks within five to ten min. I have tried several deferent belts . Is their maybe a certain belt that’s better ?
What kind of carpet are you trying to use it on? Is it a super thick carpet or rug?
@@richardsvacuumcenter no not realy not think it’s a place am renting and it’s been here for six years I would say but no . If you put your finger down into the rug it covers just the tip of your finger and am a girl so that’s not much at all . Iam pretty handy with things and I be scrapping and breaking things down motors and all so I usually can figure things out but not this time . Could they just be cheap belts I got them on Amazon twice they came two pair in a pack . Cause the brush rolls fine when I spin it with my hand . This last time right before the belt broke I heard a weird sound and I knew right away that the belt was going to break and it did. Should the belt be tight when you put it on because it seemed a little loose
@@nancyellmore2565 are they genuine bissell belts? If not, I would say first try ordering the genuine bissell brand belts (oem). part numbers are in description.
@@richardsvacuumcenter ok ya I do that thank you and no Iam pretty sure it was another name . The no frills belts . I never seen the Bissell belts on Amazon but I order parts from Bissell before. the front plastic cover where the rollers are seems to break often . It just a little piece of plastic no big deal but I like taking care of my things so I order one One or two from there. I got a feeling thats what it is . Thank you for your time and help. If an able I try to send some business your way but summer over and thats when people come to the beach.
Thank you so much you are so helpful
Ty so much
I did subscribe sir😊
Very helpful thank you 💪🏾
i am curious if you can answer a question that nobody including bissell can answer, my bissell premier deep clean will spin the rollers the moment i turn it on but after a second or two they stop. The fact that both brushes spin freely and as they should that tells me the belts are intact and that the rollers are not obstructed by debris leaving me baffled as to why they would suddenly stop. I have seen a billion videos and articles and not once is this ever brought up so i figured I would ask you. If you do reply thank you ahead of time. Thanks, Shane
What is the model number?
Great video. What if belts not broken?
Then you shouldn’t need to replace them.
Hey there! I borrowed my parent's bissell pro heat lift off deep clean pet and we cannot get the brushes to line up with the belts. There is a gold screw that goes into one of the brushes and that falls out? Everytime we put it all back on the brushes move around and the belt comes off. Please help😂
You need to take that gold screw to the pawn shop and get some money for it! 😂
Jk I’m not sure how to help you on this. I don’t know of a Bissell with a screw that goes into the brush roll itself.
Thank you so much
Thank you- great video. My big belt over-heated and left some hard melted residue on both ends of the rollers. How can I clean them so the new belt doesn't break?
Some times the melted plastic will chip right off. Might be possible to salvage your brushes but they could just need to be replaced.
Thank you!
Help, Please , difficulty locating brush belts # for Bissell proheat 2x turbo carpet cleaner
In description
Thank you. I did everything and the sprayer and suction is still not working
might have a clogged heater. you may need to bring into a local repair shop
I have the same one but not getting suction on the bottom part but I am on the tool wand. I turn the dial to carpet but suction. I cleaned it and took it apart cleaned the filter and nozzle on the front. Still no suction??? What am I over looking? Can the drive belt cause it to not have suction on the carpet part? Still have suction on the tool wand?
drive belt would not have any relation to your suction issue. not sure what your issue is. sorry it's hard to help online with things like this!
While maintaining side casing water jet side a little spring came out is it part same model as demo thanks
I figured it out it was the belt and the face plate was cracked.
thank u very helpful
Good video, but I'd like to see one on the Proheat 2X Lift off, 1565 series. Different from the one in your video.
Noted
@@richardsvacuumcenter thanks.
My left side belt keeps ripping. Why is this?
Not sure! That would be something I’d have to lay my eyes on!
Mine also keeps breaking
But I do have another one for you my carpet cleaner will not suck the water back up off of the carpet what is wrong with it do you have a video on that
I do not. Have you checked your red intake screen on the dirty water tank?
The large belt isn't there so I'm assuming it needs to be replaced. What should I do?
The large belt is gone? Yeah it sounds like you need to install a new one.
I opened my machine but my 2 belts are not broken. Still the brushes don't spin and I have very weak suction. What should I do next?
handle needs to be in back position for brushes to turn. did you test it with handle back or locked upright? for suction you need to check the little red screen inside your top cover of the recovery tank. it's rectangular and usually gets hair stuck in it and will reduce suction significantly.
Great video we have a Bissell Pet Pro model 17 N4 which doesn’t spray could that be a belt or would that be the pump that failed??? Thanks for the response we truly appreciate your assistance.
Does it have a heater?
Yes it does.
Most of the Bissell that come in my shop that don’t spray have a clogged heater.
Thanks for the response and advice not sure if I can take it apart and check the heater or see if it’s clogged looking for an authorized repair shop in my area now.
@@richardsvacuumcenter do you have video for cleaning a clogged heater?
Great video. I have same or similar model (had it for ~20-25 yrs). I have disassembled, cleaned, checked belts many times, so I am pretty familiar. Just now, my machine stopped dispensing clean water from the 2-in-1 tank. It does dispense the cleaning solution from small tank. Machine has good suction, brush rollers turn when machine is on and handle is back. I checked to make sure the poppet in the valve at the bottom of the water tank moves freely. Any ideas? This model is so old, most online "help" is geared toward newer units. I will gladly send you a gernerous donation via paypal if you can offer some help that gets me up and operational again. Thanks!
Does it have a heater?
@@richardsvacuumcenter Yes
Update: Called Bissell toll free product support line. Went through additional troubleshooting. Turned out the white plastic spray nozzles on the ends of the black rubber feeder tubes in the base were clogged. Cleaned them with an old toothbrush and got back to work!
Hi, just a quick question, does the brush suppose to spin during cleaning? Because I just noticed mine doesn't. Thanks in advance
I already checked and belts are fine and not broken
Yes they should be spinning during washing
@@richardsvacuumcenter thank you for getting back to me, any suggestions why not spinning even though the belts are not broken?
@@hosenmo1727 I'm having the same issue. Did you identify the problem in the four months since you posted?
Hey do you know how to remove the bottom part that holds the brush rolls with the belt and it has the metal poles attached?
The non motor side has a clear cover as well with 2 screws. Remove that clear cover and it will give access to that axle assembly
@@richardsvacuumcenter thanks and I tried replacing my brushroll but everytime when I push the vacuum I hear friction sound coming from the belt on the left underneath the cover I did everything like you did in the video
@@moreatastic4590 hmm then I don't know if I can help you beyond that. It's hard to diagnose things like this without just having a look at them.
Great job!!! Thanks it helped me out!!!!!
Would this fix a no spray also problem. I got no spray and no rotation
Probably not. No spray is usually a clogged heater or a bad valve.
It’s actually both no spin, no spray. Thank you for the response
do you have video on replace the belt motor ?
I do not.
My machine only have one brush, but they send me two belts on with teeth and thin, the other wider and flat
What is the model number of your machine?
Do you have the belt part numbers handy?
added to description.
I opened up my machine, both belts are fine, not split. Yet my brushes don’t turn when i turn on my machine.
Is the handle in the back position when you are testing?
I do not have a track on the end of my roller where the belt goes
I think it burnt off with the belt. I only have one shaft that is not attached to the brush roll .the other is stuck Inside of the brush roller
@@teresafroemel79 send me a few photos. I'll take a look and can better assist after seeing it. richardsvacuummi@gmail.com thanks!
Where can I buy the belts?
You should be able to find on Amazon or eBay.
My large one broke???
You’ll have to determine that for yourself
My 2x looks way different than this one
Can you just put the dam belt on to see how
lol relax my friend! Use the fast forward button! 😂 remember this is free content. You’re welcome.
Thanks!