Vacuum repair man | How to Replace belts on a Bissell Revolution Pet Pro carpet cleaner
Вставка
- Опубліковано 4 жов 2024
- If this was helpful and you would like to send me a tip as a thank you: venmo @Brett-Magnuson-3
Belts: amzn.to/3K6X2XF
Interested in investing in a quality vacuum that can last you 20 years? Contact us directly at (321)454-3838 Ask for Brett
www.richardsvacuum.com
You are a Prince among men!!! The directions that came with the belts were WRONG. Thank you.😊
Hardly so. That title is for only One Man.
Thank you so much. I had broken belts, diagnosed by your video, accessed them, ordered a new belt on Amazon for 5.00, got in one day, watched the rest of your video and placed all broken belts and cleaned machine! I have a brand new machine and thanks to you my husband have clean carpet and I won’t have to get divorced!!! Hahah we live on a farm and it can be quite messy at times’ thank you is not enough
lol I’m adding “saved a divorce” to my resume
I didn’t know what the tiny holes were for. Thank you for your step by step instructions! Belt successfully changed.
I was just cleaning my machine having an issueputting the belt back on. thankyou for saving me so much time
Thanks bud! Exactly what I needed to know- clear concise and to the point- easy on the ears too I might add. Thanks again!
YOU are brilliant!!! The paper directions had me baffled. Thank you immensely.
I really appreciate the tutorial. I have a slightly different model, but your video sure did help. My thing was I could not see where the bigger belt went around, until your video. Thanks 👍🏾
I thank you very much for posting this video because it is spot on. Anybody that has this carpet cleaner and you have to do maintenance, watch him do this video!!!
Wow...thanks for the fabulous instructions. I couldn't get the brush cover off...you made it easy
Should have looked at your video before I wasted 30 mins on the booklet. Thanks, man.
I really needed this, thank you. Didn't realize it was so easy to take apart!
I love how you explain this. Thank you
Thank you so much for the instructions and the clear photos to get at the parts without breaking any of the plastic prongs off! You were a Godsend when I needed it.
After a $10 belt kit on Amazon this got the brushes spinning for me again - thanks!
What size belt did you order?
This was extremely helpful! Thank you so much!
Thank you so much! This was extremely helpful.
You are a lifesaver!!!!!!!!!!!!!
Thank you so much! Could not have done this without you!
Thank you very much. Very helpful 👌..God bless you 🙏
Excellent video, extremely informative. Thank you.
Super helpful and easy to follow…thanks!!!!!!
Great job. Thanks for the help!
Awesome!!!!!!! Thank you it worked like a charm!
Thanks, video was very helpful for installing the new belts.
Thank you so much. Very helpful .
Thank you so much. Perfect instructions.God bless you and yours
Do you have a video on how to replace the lower vacuum hose?
Very helpful, thank you!
Thanks! Made all the difference!
Glad it helped!
Very clear and to the point. Thank you.
Your video helped me SO much! Thank you!
Excellent, perfect how to video!
Excellent video. Of course I had difficulty putting the wheel cover back on and cut the belt thst had slipped off out of place because well why not?!
When I did put the belt on. I was just guessing but I got it right according to your video but my belt is too big but I love your video it makes things so easy
Thx for helping me fix my cleaner!
Awesome video, thank you
Help full Video Thanks.
Well.presented instructional video...thanks
Very Nice job!
Thank you so much!
Thanks for info!!!
Thank you man!!!
Thank you sooooo much!!
❤ I could do it now thanks. 😊😂
Helpful. Thank you!
very clear thank you so much
This is a great video. However I’m still having a few issues. My belts appear fine but the machine makes a very loud noise and smells like something is burning??? Could it be I need to replace the belts?
Possibly yes
The belt geared belt that goes directly to the brushes is slipping.. or clunking as it’s hopping off the gears even after replacing it with a genuine bissel belt. It’s to lose and I don’t see a way to tighten it.
Mine too. Just replaced with a new belt. Still doing it. Crappy design
Can you confirm that the axle for the brush properly installed inside the end piece?
I had the 1 inch long belt guide that is attached to the large cover fail. End of belt. Ebay to the rescue for a new cover.
I replaced my belts and it looks exactly like yours but it smells like burning rubber. When I check it after running it for a few minutes the main belt is hot but it doesn't look like it's rubbing on anything or show any wear. Any suggestions?
Check your bearings to make sure they aren’t bound up.
I have the same vacum its not turning on can you make a video for that
Check your plug first. Not sure I could make a video that can specifically help you because power issues can be many different things.
My sisters machine has an ceased shaft the one with the red pully. cant quite see how to remover it.
That’s a much more detailed video. I do not have that available at this time.
Wht do I do if the rollers are not turning anymore? How do I fix it?
Did you install new belts?
So I've done everything you've done, but it seems that the gear is jammed and will not even do one full spin. Any idea?
You may have a seized pump.
Do you have an Amazon link where i could order this? Thank you!
Yes check description
@@richardsvacuumcenterHey! Ordered! Thank you very much!!! 😊
Replaced stretch belt, turned on the machine, it started smoking.
Checked the stretch belt, and it had slipped off the pink/red pully so the rubber was burning on the shaft.
Any idea what caused this?
Something was jammed. Either the brushes or the pulley. When you installed the belt did you rotate it to ensure it centered onto the pink pulley before turning on?
@richardsvacuumcenter the shaft was rotating, but the pink pully wasn't.
Second go, centred, got the pink pully rotating this time. Turned on brushes spinning, etc. Then, it started to smoke a tiny bit, checked, and the belt had snapped off this time.
My side belt is way to small. What belt should I buy?
Check description
What size drive belt did u purchase
Please check description
Hi! So the main belt broke on mine. Got the new one. And have it put together but when I try to make it turn it doesn’t turn the other brushes. It also smells and smokes horrible when I turn it on. Idk what else it could be
Something is seized up. Check each brush and the pump pulley
Can it be bought at a big box store
Belt type or name would be useful
Thanks
If you click the link in the description it will take you to the right belts and the part numbers if you wish to buy somewhere else
I just took mine apart to clean it and when I put the brushes back in that I put the belt on.. when you roll the brushes to check and see if the belts are in.. the one belt sort of clicks... like when you roll the brushes by hand it feels like the belt slips for a second and it ckicks... is it supposed to do that?
No
@@richardsvacuumcenterin your video it does it too. Right after you reinstall it it makes one click.
do you have to take the brushes off to replace the stretch belt?
No just slide the gear brush off the pulley in that case
Is the belt that attaches the drive motor to the rollers a ribbed belt or a flat belt?
It's a flat belt
Thank you. Yes it is flat
What size r the 2 belts on the rollers. They have numbers on them
No idea. I don’t have any to measure here. Link in description of you need to replace them.