THE REVIVAL OF A SUZUKI GSXR (PART 4)

Поділитися
Вставка
  • Опубліковано 8 лип 2024
  • Welcome to the channel and another episode on the GSXR revival.
    I am really excited as in this video we manage to get the engine back into the bike! along with that we got a whole host of other work done and we are so close to getting the bike started. I have tried to show you as much of the process as possible whilst keeping the video to a reasonable length.
    Here is a link to the series on the GSXR if you haven't seen any of the other videos:
    • GSXR BARN FIND
    Timecodes:
    0:00 - Intro.
    1:00 - Dyno jet kit.
    1:39 - Pre checks prior to engine refit.
    3:33 - Fitting the engine.
    9:57 - Fitting in the wiring loom.
    11:34 - Fitting the oil cooler lines.
    12:13 - Fitting the exhaust system.
    14:10 - Wiring repair.
    14:48 - Up top, fitting more engine components.
    18:10 - Fitting up the cooling system.
    20:06 - Fitting the oil filter and oil cooler.
    21:11 - Filling the fluids.
    21:35 - Progress update.
    22:39 - Fitting the carb to airbox pipework.
    23:12 - Fitting the carbs.
    27:05 - Replacing airbox screws & air filter.
    28:28 - Fitting the rear cowling.
    29:24 - Outro
    Thank you so much for watching, please consider subscribing to the channel.
    * Please note that all work undertaken is done so at your own risk, this video is for general information/entertainment purposes only*

КОМЕНТАРІ • 9

  • @cedley1969
    @cedley1969 Місяць тому +1

    You'll be impressed with the dynojet kit, i fitted one to a gsxr750wn with ramair filters/ignition advancer and it transformed the bike.

  • @Northfox46
    @Northfox46 Місяць тому +1

    Coming on nicely! 👏 a little tip with the carbs is smearing a little oil on the rubbers, makes them a bit easier to slide in 👍

    • @TurningSpannerz
      @TurningSpannerz  Місяць тому +1

      Thanks for the great tip! I did end up using some silicone spray to aid me in fitting the carbs. 😃

    • @Northfox46
      @Northfox46 Місяць тому

      @@TurningSpannerz I was waiting for you to be sat on the subframe with your feet pushing them in! I did that a few times 😂

    • @TurningSpannerz
      @TurningSpannerz  Місяць тому +1

      @@Northfox46 Sounds like I got off lightly🤣 I wasn't far from it on a FZ6 I had a few years back.

  • @bomberaustychunksbruv4119
    @bomberaustychunksbruv4119 Місяць тому

    I have a GSX1100EF I picked up last year, I was lucky the engine is very low Km's and it had a lot already done like the wiring etc. As they are getting rarer by the day, I went and painted it origional Blue/White, and it just is so rare to see one like it now people remark on it every time I go out. I always wanted to streetfighter one up, but now i've gone origional !!. Mad world.

    • @TurningSpannerz
      @TurningSpannerz  Місяць тому

      Sounds awesome! I bet it looks great. I couldn't believe when first posting the GSXR how many people had great stories about their own bikes & experiences. It is great to hear about them all! Thanks for sharing !!

  • @christopherjohnson6056
    @christopherjohnson6056 Місяць тому

    I am being polite,is it nervous chatter you suffer from, you honestly don’t need to feed us with useless information the Video says it all , they are good to watch with out toooooo much chatter , please do think I’m being rude to you , I’m not .👍

    • @TurningSpannerz
      @TurningSpannerz  Місяць тому +1

      Thanks for the comment Chris, I have been trying some different approaches to see what people like/dislike so I can continue to improve the content I deliver.