Hi all. I've added Super Thanks to my channel. If this video has saved you the expense of buying a new pair of headphones, please consider donating via the "THANKS" button. Cheers!
my headphones fell on the floor at the gym today and the left side stopped working. I was seriously about to throw them away. Your video saved my day, and my money!! thanks!!
@@metalreactswithgrandmajean8395 i don't know, it happens to me sometimes and reconnecting the bluetooth solves it. You will need someone to check inside if there's a misconnection maybe :/
That was EXACTLY my predicament! For a moment I thought I had lost my wonderful-sounding headphone, and then I found your video and fixed it in less than five minutes! Thanks dude!
So glad I looked for an answer on my left speaker not working. I disassembled it and saw that the board was intact. So I looked overall and all seemed good. Last thing I did was spray contact cleaner on the board. After reassembling. I powered on and heard both speakers 🔊 Thank you for having this available. You made my day. Now I can listen totally. And listen to these bad boys when I mow my yard!!👍💛💙
Yay! Thanks a lot for showing how to properly open and close these. Got both sides of the phone working again! Opened, stretched the springs, as someone suggested in the comments, and closed - and it was fixed. (The circuit board was firmly in place.)
Thank you very much for this video mate. I have the Tune500bt, almost the same model but with longer battery life and some other feature I think but same appearance. A nephew of mine dropped them 2 nights ago and they completely stopped on the right side for me unfortunately. I was reading through the comments and found someone who had the issue and followed his suggestions about the springs not touching the pads etc. I stretched them out and now it works normal again. Thanks for the video, I will even leave a like on my way.
Thanks for the help! Mine stopped working on the left side after they fell on the floor during my training and thought there was no solution. Just found your video and gave it a try. I'm so happy I tried! They're working fine now 🤩🤩🤩
Now I think about it, I reckon I might have dropped mine a day or two before this as well. The left was cutting in and out when I shook the phones a little. I do a lot of audio tech stuff, but I'm no headphone expert. I just like to encourage people to investigate before throwing stuff out. Amazing how often a broken item has a very simple fix.... Glad you like my video!
@@RobMods I prefer to fix things if possible instead throwing them away at the first failure. I'm glad you did it because I searched on JBL site and there wasn't anything useful to this simple fault. There wasn't anything broken, just misplaced. Keep it up! 🤘
I had the same symptom, but turned out the actual speaker was open circuit. Also, I guess I have a newer version of the Tune 500BT because there were no springs; now there are soldered wires. Still, I had a second non-working pair so managed to fix this one by replacing the speaker. And would never have figured out how to open, test speaker resistance, and then replace the pad, without this video. Thanks.
Thanks rob, i was going to replace mine because of several problems, but seeing how easy is was to take them apart, i dont need to! Thank you for saving me and my headphones!
Works perfectly. When I went home frome work my right earpiece stopped working. Now (after dinner) I went to look at possible repair videos. I have seen yours and I wanted to check that it was really the right earpiece that was not working. It seems that watching your video repaired my headset 😃
Cool, I only cleaned those contact where the springs touch with some isopropanol and now it works again (I didn't see any dirt or anything but somehow it worked). Thanks also for showing how to put the ear cushion back on, that was easier than I thought!
Ich danke dir, war schon so traurig weil sie runtergefallen sind und ich natürlich den kassenzettel nicht aufgehoben hab ... Dank deinem einfachen verständlichen Video hat man Geld/ Zeit und Elektroschrott gespart 🤩
Had a problem with the right side, it's a bit different there, the board was not moving, but video helped me to understand about that connection (strings and pads... I am not an electrician, sorry). I think strings were short, they didn't touch those pads, so I helped them a little with a force. It works now. Thank you :)
Thanks! The soft padding came off on the right headpiece. I had no idea how to put it back until I watched your video! Thanks! I am now subscribed and I liked your video😁
Help bro I have JBL E55BT .. My JBL can't be turned on, when charging the charge indicator is on and when using the cable it turns on normally.. What do you think is damaged? Thank you bro
I have a Momentum 2 that has been great for me but my water bottle leaked in my bag and after about 3-5 months after that it randomly pairs with my phone will it fully stopped pairing. It powers ON and I can use it wired but I miss the wirelss function of it. I believe the bluetooth does not power ON or the part that needs to power on the bluetooth is damaged. Have ever looked ito one or know where I should start?Thanks
hey i slept and probably presssured the minus key button and it won't click and that is creating the issue so I see you opened the left one can I do that with the right one to?
Hi, I disassembled my t450bt and need to change the black wire (with the 4 wires insinde) that goes through the whole headphones. I'm new at this and don't know which kind of wire to order. Please, can you help me? Cheers
Really I'd think any 4-core cable that is flexible and the same outer diameter would work. You could probably also make 3-core shielded cable work by using the braid as the battery negative connection. You could probably re-use an old (4-core) USB cable if it's the right diameter. Good luck with the repair!
My 500bt sounds very high pitched after i assembled it. I can't fix it. I took it apart, cleaned it, stretched the springs but there is still no bass. Do you know how to fix this?
Cool. I'm glad this helped. I have two pairs of these, and the other pair has been fine. But so many on here are saying they had the same problem, so I guess it is a common issue...
Mine has an issue where as soon as you touch them they turn off and will randomly turn back on. Tried to open both sides, everything looks in place, sprayed contact leaner all over electronic parts but still getting this issue. Anyone has the same problem? Thanks
I think I have the same problem, when I turn them in some sort of way they switch of and when I turn them back they turn on again. However I still haven’t found a solution to this but I think it might be a cable that has a cut or something
I plugged my one for charge but it's not charging? What should I do. The red light doesn't on when I plug it in? It comes on and goes out again please help
Hey idk if you can help but my headphones (JBL 500bt) my favorite ones I use to make my music have broken i don't know what the problem is the seem to be less loud if you have any clue on how to fix it it would help me out a lot
I'm not really a headphone expert, more an audio tech person really. But I had a similar problem with mine the other day. They were very quiet with my laptop, but fine with my phone. I simply "removed device" in windows, then scanned, found, and added them again. They are fine now. Also, a few times I've had the opposite problem, where they were really loud and the windows volume slider did nothing. The fix was to change the "absolute volume" setting in windows. I hope this helps mate!
it is the contact to the springs that cause intermittent ot no sound. u can use a pencils rubber eraser and clean the contacts then after cleaning, I's stretch the springs out about an extra eight inch or less, but make sure the electrical board is tight/snug in it's pcket. Sometimes that board comes loose. If it is, get some epoxy and glue it in place let dry. reassemble.
Thanks, nicely made. But my headphones work perfectly on both sides but on per cable. Bluetooth or startup sound only right. Anyone knows this problem and how to solve?
Hi all. I've added Super Thanks to my channel. If this video has saved you the expense of buying a new pair of headphones, please consider donating via the "THANKS" button. Cheers!
my headphones fell on the floor at the gym today and the left side stopped working. I was seriously about to throw them away. Your video saved my day, and my money!! thanks!!
I was about to do the same and just found this vid. Tried ut and now there're working again 🤩
Mine keeps shutting themselves off after about 30 seconds of being turned on. What do you think it is?
@@metalreactswithgrandmajean8395 they need to be charged or the bluetooth is off. You can try turning it on and off again.
@@shubikl9826 I've done both. They connect n my music plays for a few seconds and then it shuts off. Do you think they need to be reset?
@@metalreactswithgrandmajean8395 i don't know, it happens to me sometimes and reconnecting the bluetooth solves it. You will need someone to check inside if there's a misconnection maybe :/
That was EXACTLY my predicament! For a moment I thought I had lost my wonderful-sounding headphone, and then I found your video and fixed it in less than five minutes! Thanks dude!
My man gave s super thanks and didn’t get any appreciation:(
Man , you know what ? I just want to cry . I have this problem for like 1 year and you just fixed it . Thanks a lot.
This video is not really typical of my channel, but it seems like a fairly common problem with this model. Glad to have helped you mate!
Finally! I opened mine, pulled on the springs ever so lightly and reassembled. Working again, thanks so much!
Same, checked all the wiring and all good but still not working... flicked the spring and all good lol 😁
Brilliant video. I've followed your easy steps, tested the coils and now my JBL's are working again! Thank you from South Africa 😊
My JBL’s are having a hard time charging can anyone help?
What screwdriver did you use
@@Z4ZR Hi, I used a tiny one similar to the one in the video
What glue did u use
@@ndaedzomasevhe2465I’m having the same problem
So glad I looked for an answer on my left speaker not working. I disassembled it and saw that the board was intact. So I looked overall and all seemed good. Last thing I did was spray contact cleaner on the board. After reassembling. I powered on and heard both speakers 🔊 Thank you for having this available. You made my day. Now I can listen totally. And listen to these bad boys when I mow my yard!!👍💛💙
Almost went to JBL service center which is 2 hours away from my home then i found this video and it works! Thankyou ✨
Yay! Thanks a lot for showing how to properly open and close these. Got both sides of the phone working again! Opened, stretched the springs, as someone suggested in the comments, and closed - and it was fixed. (The circuit board was firmly in place.)
Glad it helped!
Thank you very much for this video mate. I have the Tune500bt, almost the same model but with longer battery life and some other feature I think but same appearance. A nephew of mine dropped them 2 nights ago and they completely stopped on the right side for me unfortunately. I was reading through the comments and found someone who had the issue and followed his suggestions about the springs not touching the pads etc. I stretched them out and now it works normal again. Thanks for the video, I will even leave a like on my way.
I had exactly the same problem and fixed it with the springs ! Thanks a lot !!!
Fixed mine the same way after they fell on the floor. Many thanks for the video and for the comments.☺️
OMG thank you! Left side was not working. I've just literally opened that side, cleaned it a bit and it works!!!
Thanks for the help! Mine stopped working on the left side after they fell on the floor during my training and thought there was no solution. Just found your video and gave it a try. I'm so happy I tried! They're working fine now 🤩🤩🤩
Now I think about it, I reckon I might have dropped mine a day or two before this as well. The left was cutting in and out when I shook the phones a little. I do a lot of audio tech stuff, but I'm no headphone expert. I just like to encourage people to investigate before throwing stuff out. Amazing how often a broken item has a very simple fix.... Glad you like my video!
@@RobMods I prefer to fix things if possible instead throwing them away at the first failure. I'm glad you did it because I searched on JBL site and there wasn't anything useful to this simple fault. There wasn't anything broken, just misplaced. Keep it up! 🤘
What if the headphones charge but wont turn on
@@JmanTV647battery might need replacing
I had the same symptom, but turned out the actual speaker was open circuit. Also, I guess I have a newer version of the Tune 500BT because there were no springs; now there are soldered wires. Still, I had a second non-working pair so managed to fix this one by replacing the speaker. And would never have figured out how to open, test speaker resistance, and then replace the pad, without this video. Thanks.
Hey I have the same issue with you and I also have newer version of the Tune 500BT. Do you mind telling me how to replace the speaker?
Thanks rob, i was going to replace mine because of several problems, but seeing how easy is was to take them apart, i dont need to! Thank you for saving me and my headphones!
Works perfectly. When I went home frome work my right earpiece stopped working.
Now (after dinner) I went to look at possible repair videos. I have seen yours and I wanted to check that it was really the right earpiece that was not working.
It seems that watching your video repaired my headset 😃
can yall help me out when i take out the screws the black part wont open its glued
Cool, I only cleaned those contact where the springs touch with some isopropanol and now it works again (I didn't see any dirt or anything but somehow it worked). Thanks also for showing how to put the ear cushion back on, that was easier than I thought!
Ich danke dir, war schon so traurig weil sie runtergefallen sind und ich natürlich den kassenzettel nicht aufgehoben hab ... Dank deinem einfachen verständlichen Video hat man Geld/ Zeit und Elektroschrott gespart 🤩
Had a problem with the right side, it's a bit different there, the board was not moving, but video helped me to understand about that connection (strings and pads... I am not an electrician, sorry). I think strings were short, they didn't touch those pads, so I helped them a little with a force. It works now. Thank you :)
Same problem as well, story short you will helped me skip the troubleshooting and just stretched the springs and it works again. gg mate
Had mine for years, the left side barely works now, was wondering were you can buy replacement spring things, pretty sure mine are corroded
Mulțumim!
The way you put back the soft padding is truly impressive. I'm still working on it. 🤪
Thank you so much, got mine working again after they fell c:
This was a great tutorial!
Mine also didn't work after it fell. How did u fix it
This video is a lifesaver. Thank you so much for saving me from making an expensive decision! My headphones are working perfectly now.
Thanks you so much🔥🔥🔥🔥
I was so worried when my previous JBL TUNE 600BTNC randomly stopped working.
Thank you and bless you
Glad I could help!
TY IT WORKEDD!!! I STRETCHED THE COIL LIKE THE OTHERS IN THE COMMENTS AND IT FINALLY WORKKKEDDD
Thank you sir, because of you i wont have to buy new headphones
Thanks! The soft padding came off on the right headpiece. I had no idea how to put it back until I watched your video! Thanks! I am now subscribed and I liked your video😁
Wow!! Thank you very much. By following your advice I fixed my JBL TUNE750BYNC left side that wasn't working after a fall down
Help bro I have JBL E55BT .. My JBL can't be turned on, when charging the charge indicator is on and when using the cable it turns on normally.. What do you think is damaged? Thank you bro
This video just saved me a few hundred dollars, This helped a lot. Good stuff mate✌🏽
Excellent tutorial Rob. Very appreciate.
Problem fixed!
Cheers mate, great video 🎧 🎆
Thanks mate!
Thanks for sharing this!🙌 you're the GOAT!🏅
Rad video! How do you disable the led on these?
Wow! Thanks so much!! Took two attempts, but it really worked!!
Where are you based , I got the same problem or might be the switch
Super thanks! My JBL BT's left headphone is working again.
Hello
What does those sprays do? Are they really necessary?
Excellent video! Short, straight to the point but still you can learn few tricks. We need more of those kind of, not useless talking and sh...!
Thanks so much. Very helpful..fixed my troubleshooting (jbl 500) already. It worked! Godbless. More power!
Thanks for this vid. Just saved my son’s headphones 👍🏻🥳
It worked!!!!! Unbelievable! Ty man 👍
Thank you very much, you saved my headphones 🤩
problem solved, great guide, thank you very much, keep it up!! by from Italy
omg I´ve been having the exact same issue! i can´t hear a thing on the left side! I´ll definitely try this out. Thank you!
I have a Momentum 2 that has been great for me but my water bottle leaked in my bag and after about 3-5 months after that it randomly pairs with my phone will it fully stopped pairing. It powers ON and I can use it wired but I miss the wirelss function of it. I believe the bluetooth does not power ON or the part that needs to power on the bluetooth is damaged. Have ever looked ito one or know where I should start?Thanks
It works to the wireless ones?
Thank you Thank you just fixed my headphones now I'm happy the video really helped 🇿🇦🇿🇦🇿🇦
Well this help if the headphones won’t turn on?
The unit has no response.Not used for long time.Could the battery not working ?Thanks.
I have problems with the charging any advice?
Do you have a guidance how to replace the battery?
What did you use on your video? Please can you answer I see everyone have their headphones fixed
hey i slept and probably presssured the minus key button and it won't click and that is creating the issue so I see you opened the left one can I do that with the right one to?
Mine fixed this way thank you so much!
Hi, I disassembled my t450bt and need to change the black wire (with the 4 wires insinde) that goes through the whole headphones. I'm new at this and don't know which kind of wire to order. Please, can you help me?
Cheers
Really I'd think any 4-core cable that is flexible and the same outer diameter would work. You could probably also make 3-core shielded cable work by using the braid as the battery negative connection. You could probably re-use an old (4-core) USB cable if it's the right diameter. Good luck with the repair!
@@RobMods thank you very much, it might take me a while but will sure try. And do you happen to know the gauge of these wires normally?
Awesome man! Thanks for the info, worked perfectly.
What is the battery dimension and mah of jbl t450bt... Please reply
Thanks for your video!! I was about to throw the headphones to the bin. Good work!
My 500bt sounds very high pitched after i assembled it. I can't fix it. I took it apart, cleaned it, stretched the springs but there is still no bass. Do you know how to fix this?
What is the dimension of battery for jbl t450bt.....
HOLY SHIT!! I was so sceptic about this and I was about to throw mine away but then is was like why not try it and it ACTUALLY worked 😳
Cool. I'm glad this helped. I have two pairs of these, and the other pair has been fine. But so many on here are saying they had the same problem, so I guess it is a common issue...
excuse me but can this fix both sides of the headphones? or only one
My left only works if i move around my right one... I tried your method on the left but it didnt work. I dont understand how to fix, please help
my jbl wont turn on and the volume button and stop button is not working too do you know what should i do?
Thank You. Love from Ethiopia
Love back to you, from Australia!
what to do when the battery are overheating when charging like do i need to replace the battery?
what do you use to clean the board?
That's just a squirt of electronics contact cleaner for the spring terminals. Definitely optional...
Thanx so much. It works. You the OG
You're welcome!
Thank you for this solution. I was in the same situation, but on the other side.
Thank you!!! it helped me a lot 😁
Thank you! It was very useful.
What were the liquids u used?
Hi Manav. I used Loctite 480, but regular super glue will work just fine.
Where is the thing at Mine look fine but not playing
What do I do if my wire got caught on something and it just stopped working
i have 450BT JBL head phone BUT THERE IS SOME CHARGING PROBLEM WHOLE NIGHT CHARGED BUT NOT POWERON...PLZ HELP ME DEAR....
Saved my phones too ! Thanks !!!
You just saved my day ❤️
Like a charm, thanks!
I just wanna say thank youuu so muchggg Man
Thanks mate.
I have a problem, my headphones fell and now the buttons wont click (most of them) and they get pressed really easily
Thank you idol, hehe right lang kasi gumagana, ngayon ok na 👍
Mine has an issue where as soon as you touch them they turn off and will randomly turn back on. Tried to open both sides, everything looks in place, sprayed contact leaner all over electronic parts but still getting this issue. Anyone has the same problem? Thanks
I think I have the same problem, when I turn them in some sort of way they switch of and when I turn them back they turn on again. However I still haven’t found a solution to this but I think it might be a cable that has a cut or something
Does anyone know how to reconnect a earphone that popped out of the swivel? I fell asleep with them on and now one side is hanging.
It worked! Thank u so much
Opened mine up today (510BT) and it doesn’t have the springs and contacts. Do you know anything else I can check. Right side not working.
Did you try using the continuity mode (digital multimeter) on those 2 springy contacts ? If you get a beep then the actual speaker itself is fine. 🤔
@@davidbolha Thank you for replying. Mine doesn’t have springs and contacts. I wish I could send a picture.
@@IluvYahweh You could send them via my IG... 😉🤔
@@davidbolha I’m sorry, what is IG?
Please explain what your “IG” is? I would like to send pictures to you. Thank you
I plugged my one for charge but it's not charging? What should I do. The red light doesn't on when I plug it in? It comes on and goes out again please help
Can you solve it ?.i have the dame problem
Mine stopped charging out of no where pls help.
My off/on button is idk like loose and idk how to fix it
It worked!!! Thanks a lot!!!
Repair successful!! Thanx a lot!!!
Hey idk if you can help but my headphones (JBL 500bt) my favorite ones I use to make my music have broken i don't know what the problem is the seem to be less loud if you have any clue on how to fix it it would help me out a lot
I'm not really a headphone expert, more an audio tech person really. But I had a similar problem with mine the other day. They were very quiet with my laptop, but fine with my phone. I simply "removed device" in windows, then scanned, found, and added them again. They are fine now. Also, a few times I've had the opposite problem, where they were really loud and the windows volume slider did nothing. The fix was to change the "absolute volume" setting in windows. I hope this helps mate!
@@RobMods mine are quiet with everything and I kinda need them that's only reason I'm looking for help
@@turtlebeats3867 Did you get it fixed, because I am facing similar problem, where it started with less volume to 0 volume now. Help!
My right side is it working plz help
Bro I don't have that spray , is there any other options?
it is the contact to the springs that cause intermittent ot no sound. u can use a pencils rubber eraser and clean the contacts then after cleaning, I's stretch the springs out about an extra eight inch or less, but make sure the electrical board is tight/snug in it's pcket. Sometimes that board comes loose. If it is, get some epoxy and glue it in place let dry. reassemble.
Mine seem to only work when I place my t500s at a certain angle
HOW TO STOP THE HISSING SOUND ONY JBL NC 760 ?
Sof kaha pi hai apki
Thanks!
Thanks, nicely made. But my headphones work perfectly on both sides but on per cable. Bluetooth or startup sound only right. Anyone knows this problem and how to solve?