Why did Toyota feel the need to rivet the side moldings on the LX suv's. What a pain! Very nice thorough job you did. The 2004 GX470 has side moldings that just pull off. No clips or rivets to mess with.
My land cruiser 100 OEM glass is still good but would like to seal it properly now that the top rubber seal is coming off. What is the solution if I need my rubber seals replaced?..
My glass guy told me the rubber molding along the top of the windshield is cosmetic since there is urethane sealing the glass underneath. If thats the piece you're talking about I think you can replace it for like $25. Part number 75531-60030
Hi, is there any chance you have a list of part numbers that I can obtain to replace all of the moldings? I just purchased a 2004 and the entire surround needs to be replaced. Thanks!
Ok, so I called my Toyota dealer, there are five moldings needed: Top 75531-60030, Left/Right short x 2 75543-60020, Passenger long 75533-60031 and Driver Long 75534-60021. And of course the rivets you mentioned 90269-04053. I own Airstreams, rivets are super easy to work with once you get the hang of them.
You are a true pro! That's the RIGHT way to do this not-so-simple job. There aren't many ways to kill a Land Cruiser or LX470, but rust is one of them... and if you brute force the old glass out, stuff WILL get scratched and you'll never see the result until the next time the windshield is out.
Great video, could you assit me if possible thank you kindly Idiots installed windsheld 2 times half job , lots of wind noise. same vehiclle. LC 2000 . Is it possible to add seal or the windscreen must come out?
I'm looking at buying a Lexus lx470 but it has rust around the windshield. I think I can even hear wind coming through when driving at 55mph. The two pillar moldings are really messed up it looks like they took sheet metal screws and screwed it in. Really bad hack job. I'm guessing there's pretty good rust all the way around the windshield. Do I stay clear of this vehicle or is it fixable?
I didn't see any damage to the glass. What was the reasoning for the replacement? Also, I'm in NC. You have any friends out here that do the same professional job as you?
On one hand comrade Alfredo save me a lot of headache removing cowl panels. On other hand @ ua-cam.com/video/iLQSljJNj-s/v-deo.html "It sounds like it broke" - it is broken, the other one :). The left panel has 2 clips, one is 2 cm from the edge and the second one 18 cm from the edge
great job mate, how long dose doing it like this take? and how do you price a job like this, I'm in Australia I do them all the time do I eveything you do but not as much the old tape on the moulding everyone just glues them I'm happy to put the effort in but find it hard to price jobs if I do them perfectly and take more time. I prime eveything clean the body up save the clips but not as pedantic because of time.
My rear view mirror detached from that black piece on the windshield. Do u have a video on how to reattach the rear view mirror to that black bracket piece (04lx470)? Mine won’t slide up and catch on both places and I may have made it worse trying to adjust it.
Great video! At 22:47 you talk about a spacer that you use to keep the glass from sinking in. What is that exactly? I've got a land cruiser that needs a windshield and I want to supply all the "special" parts to the shop. I gotta keep my baby safe:)
You should make a video of all glass installations doors roofs back, vents etc and sell the info to you know who so they can use it to train their employees
I didn’t understand when u say bottom later. The rubber molding has a hook type channel which I am not able to snap in the trim. Do I need to push the rubber molding channel inside the trim and then push up with some sort of tool like u r doing? I did that but it don’t catch anything!!!
It's a real pleasure watching real progressional do their job. Good job!!!
You're like a dentist!! I might travel to you. Seriously great work!!
Why did Toyota feel the need to rivet the side moldings on the LX suv's. What a pain! Very nice thorough job you did. The 2004 GX470 has side moldings that just pull off. No clips or rivets to mess with.
My land cruiser 100 OEM glass is still good but would like to seal it properly now that the top rubber seal is coming off. What is the solution if I need my rubber seals replaced?..
My glass guy told me the rubber molding along the top of the windshield is cosmetic since there is urethane sealing the glass underneath. If thats the piece you're talking about I think you can replace it for like $25. Part number 75531-60030
Hola Alfredo, why were you replacing this windscreen in the first place? Gracias.
Hi, is there any chance you have a list of part numbers that I can obtain to replace all of the moldings? I just purchased a 2004 and the entire surround needs to be replaced. Thanks!
Ok, so I called my Toyota dealer, there are five moldings needed: Top 75531-60030, Left/Right short x 2 75543-60020, Passenger long 75533-60031 and Driver Long 75534-60021. And of course the rivets you mentioned 90269-04053. I own Airstreams, rivets are super easy to work with once you get the hang of them.
You could have Amazon link for cowling tool
what a work ethic, you do great work sir! Thanks for your video
You are a true pro! That's the RIGHT way to do this not-so-simple job. There aren't many ways to kill a Land Cruiser or LX470, but rust is one of them... and if you brute force the old glass out, stuff WILL get scratched and you'll never see the result until the next time the windshield is out.
Alfredo, I'm coming to see you next time I need glass for my LX :-)
Colin Kennedy definitely! Thank you
Seriously the real deal.
Donde compras las nabajas
I hope you could move your store to east coast
Friend, good work. I am signed. Where to get QuickSet?
Awesome attention to detail and technique! Thank you for sharing your process.
Absolutely professional job. I’d love to see you record this same process on a newer land cruiser or LX570. 2008+. Keep up the nice work.
Wish you were in NYC
Amigo, buenisimo tu video, eres un chingon! Gracias, justo quiero arreglar el plastico con los remaches que se despego del techo
Same thing as a 1999?
Wrd TOOLS Raptor tools which once you recommend to u ?
I love them both! I use both if them.
@@AlfredosAutoGlassRepairCorona both are good brand for which once recommend to me for long lasting ?
Great video, could you assit me if possible thank you kindly
Idiots installed windsheld 2 times half job , lots of wind noise. same vehiclle. LC 2000 .
Is it possible to add seal or the windscreen must come out?
I'm looking at buying a Lexus lx470 but it has rust around the windshield. I think I can even hear wind coming through when driving at 55mph. The two pillar moldings are really messed up it looks like they took sheet metal screws and screwed it in. Really bad hack job. I'm guessing there's pretty good rust all the way around the windshield. Do I stay clear of this vehicle or is it fixable?
I didn't see any damage to the glass. What was the reasoning for the replacement? Also, I'm in NC. You have any friends out here that do the same professional job as you?
THANK YOU!!! I needed this so much. Been hearing wind noise on my new LC 2006
On one hand comrade Alfredo save me a lot of headache removing cowl panels. On other hand @ ua-cam.com/video/iLQSljJNj-s/v-deo.html "It sounds like it broke" - it is broken, the other one :). The left panel has 2 clips, one is 2 cm from the edge and the second one 18 cm from the edge
great job mate, how long dose doing it like this take? and how do you price a job like this, I'm in Australia I do them all the time do I eveything you do but not as much the old tape on the moulding everyone just glues them I'm happy to put the effort in but find it hard to price jobs if I do them perfectly and take more time. I prime eveything clean the body up save the clips but not as pedantic because of time.
Michael OZ STPB VP it takes anywhere from 1:30 to 2:30hrs. It feels nice to do a good job like if it was for my own car. Cheers from California
@@AlfredosAutoGlassRepairCorona cool thanks mate.
Alfredo, what would it cost to get a 2000 LX470 windshield replaced? Thanks!
My rear view mirror detached from that black piece on the windshield. Do u have a video on how to reattach the rear view mirror to that black bracket piece (04lx470)? Mine won’t slide up and catch on both places and I may have made it worse trying to adjust it.
Great job !!! Keep doing it !!
Victor Gladun thank you 😊
Great video! At 22:47 you talk about a spacer that you use to keep the glass from sinking in. What is that exactly? I've got a land cruiser that needs a windshield and I want to supply all the "special" parts to the shop. I gotta keep my baby safe:)
Sounds like a workout in the background
Randy Hillhouse 😂 yes gym next door.
excellente! how do i get you to fix my glass on a 98 Landcruiser? thanks for the vid!
How much do you charge for the windshield replacement?
This was very helpful! especially the part when you show how to remove and replace the side trim. Thanks so much!
Alfredo where you get your windshield from?? And how do you do to pick the right windshield for each car??
Rad that you are pro with us & your son. And he's pro with you. A pleasure to watch.
What is the spacer you use to keep the glass from settling deeper than the molding?
You should make a video of all glass installations doors roofs back, vents etc and sell the info to you know who so they can use it to train their employees
Best teacher ever!! 👍👍👌
slim 33 Thank you!
Alfredo where you get the windshield from??
Wish there was more techs like you. Great job.
For those clips just use a pick tool.
How do you remove the glass?
I am not able to put the last rubber molding covering rivets. I am not able to channel it in place. Any suggestions?
The part of the rubber that has the lip goes toward the top, insert the top first then the bottom
I didn’t understand when u say bottom later. The rubber molding has a hook type channel which I am not able to snap in the trim. Do I need to push the rubber molding channel inside the trim and then push up with some sort of tool like u r doing? I did that but it don’t catch anything!!!
Super work sir!