I show you how to tow a low corvette that sits lowered from the factory using wood ramps for loading and loading sports cars or flat tire cars onto a tow truck how to tow!
Owners of Corvettes are very picky. It's funny I mention loading my Corvette on my rollback and here you are showing me how it's done. I was happy to see you can use the stinger to stabilize the bed. I wasn't sure about that.
yes that’s why I had trouble in the past leaving tho tow ball in it doesn’t sit flush to the ground the stinger definitely helps the truck and bed stay put!
Trust me it’s as easy as it looks you can’t learn if you don’t try just use the burning desire oz is with you in your hardest moments!! I’ve done a few lowered car videos I’ll do one with hellcat no keys 🪝💪
Pro tip.. and I kno u do this job day in and day out and we all got our own way of doing things….. but going under a 3500pound car IN NEUTRAL and ON WOOD RAMPS, NEVER put urself under the car like that man. I’ve seen soooooo many ppl get hurt on simple things that go left
Ya Did, Great . 'Tips from a ole man " 😎 I've Taped 'the little green skates, to the under side of Exhust Tips. ( Just a Note: Turn-Off Hi-Idle / PTO When Not Using , Save Fuel $ )
Chances are with something so simple as a simple break down tow for a "luxury" vehicle or low vehicle, etc. If you are the only one doing the simple job, It's because you are getting suckered into doing it, In my experience, no one wants to pay for the extra work and liability that comes with these vehicles so they won't be run by me. I've got airbags and a good load angle, I wouldn't even need boards for this so it'd be no big deal, but the lower ones I won't do for the same fee, They will pay more or they will sit and wait for someone else.
Did you set the e brake at the end so it doesnt slide of on you when you're under getting your hooks? Edit: or do those skate type things hold it in place?
@@Towvibes any way to get some close ups of how you did it ? And does it leak ? Maybe a fast video over view of it ?? Will definitely save me from buying new boxes
The soft straps have small j hooks if they do the c4 will most Corvettes even the new one now I think the c3 doesn't have them and you have to use a big j hook or an endless loop for the control arm but behind the front tire near the rocker panel feel under there and you'll see an oval shaped hole that's where the baby j will go put them on there make sure the straps far enough forward where the cable hookup to your bridal is it bouncing on the oil pan it will definitely break it👍
I'll be having my C3 Vette towed in a month. Thought I'd watch to see what to expect. Yes, us Vette owners are funny. I feel nauseous just thinking about it. (I'm a woman).
you just need 2*6 5ft long and make a hole in the wood and bed and get a pin to lock in together never ever move up or down again! if you towing Lamborghini add extra 4 foot wood and lock in to the other wood with the pin that’s it
Yah I was thinking of that kind of set up I try to keep extra wood for different kinds of situations always comes in handy doing recoveries and general towing 🪝
Instead of all the wood just flip your skies upside down roll car up skies because they like ramps when you have em upside down and 2 pieces of 2x6 I do it all the time fast better than using all that extra wood
All you need is 2 2x6's , but this will work.
Owners of Corvettes are very picky. It's funny I mention loading my Corvette on my rollback and here you are showing me how it's done. I was happy to see you can use the stinger to stabilize the bed. I wasn't sure about that.
yes that’s why I had trouble in the past leaving tho tow ball in it doesn’t sit flush to the ground the stinger definitely helps the truck and bed stay put!
You got all the tools man thats how its supposed to be, good work bro
Thank you for a great video! That guy was watching everything on this tow driver! This tow person was great!
Muy bueno hermano tu trabajo, un ejemplo.para los que nos gusta lo que se hacemos te felicito aprendo mucho.cpn esos videos
Grasias
Good shit man I don’t feel comfortable enough to do low cars yet but will practice with mine seeing your video then I’ll do customers thanks 🙏🏻
Trust me it’s as easy as it looks you can’t learn if you don’t try just use the burning desire oz is with you in your hardest moments!! I’ve done a few lowered car videos I’ll do one with hellcat no keys 🪝💪
Love the videos man.
Thank you buddy I do what I can!!🪝👍
I did a '74 Corvette the other day, owner was so nervous! Went great tho.
Yah it happens glad you got it done though great job 🪝💪
Thanks good video
Thank you so much I try! 🪝🪝
Pro tip.. and I kno u do this job day in and day out and we all got our own way of doing things….. but going under a 3500pound car IN NEUTRAL and ON WOOD RAMPS, NEVER put urself under the car like that man. I’ve seen soooooo many ppl get hurt on simple things that go left
Most def bro I’m wild but yah light vette! I trust my equipment I do daily inspections I’m more worried getting hit by driver more than anything
Ya Did, Great . 'Tips from a ole man " 😎 I've Taped 'the little green skates, to the under side of Exhust Tips. ( Just a Note: Turn-Off Hi-Idle / PTO When Not Using , Save Fuel $ )
Awesome ..!
Chances are with something so simple as a simple break down tow for a "luxury" vehicle or low vehicle, etc. If you are the only one doing the simple job, It's because you are getting suckered into doing it, In my experience, no one wants to pay for the extra work and liability that comes with these vehicles so they won't be run by me.
I've got airbags and a good load angle, I wouldn't even need boards for this so it'd be no big deal, but the lower ones I won't do for the same fee, They will pay more or they will sit and wait for someone else.
Yup. If your gonna drive a bed then its good to have plenty of lumber. 😃
Mclaren's, Lamborghini's and Ferrari's are always cool to pick up, specially when there's no key phone.😲😎
I've done two Ferrari's so far an one only had 500km on it
We towed vettes with a sling and corvette bars before there were beds. You guys today have it too easy.
cars are a lot harder to tow these days as well!
I drive a big one with air bags. Wow convenient
I’m jealous 🤷🏻🪝💪
Lol I drove a f450 gasser one time. Had too fill it 4 times a day gaaaaa
@@kevinhoward6607 omg brother I don’t know how people run them trucks!
Did you set the e brake at the end so it doesnt slide of on you when you're under getting your hooks?
Edit: or do those skate type things hold it in place?
i usually set the brake!
You gotta pluck that 1 Gy hair just to the right of the ear lol great job
that’s my tow sensor!
I've never seen anyone put the planks under the bed. Definitely gonna try that out
Yes i stair step them!
Can you provide the sizes for that plank ramp setup?
Just get u couple 4x4 posts and some 2x6 boards and few short ones at least 4ft long
You made the storage on top of the box your self ?
yes sir I got carpenter skills from before my tow days
@@Towvibes any way to get some close ups of how you did it ? And does it leak ? Maybe a fast video over view of it ?? Will definitely save me from buying new boxes
great ideal 👍
@@Towvibes can’t wait to see. Then do it on my truck
I loaded a video for the tool box 👍🪝
I loaded one of these with one board each side .
Nice brother my load angle is terrible but with custie right there best to be more safe than sorry!
Straps and wood is all you'll ever need on production cars..super low race cars that's another story....called race car trailer.
Do u have a video unloading one
Yes same video watch till the end…
How do you attach the soft strap
go around control arm
The soft straps have small j hooks if they do the c4 will most Corvettes even the new one now I think the c3 doesn't have them and you have to use a big j hook or an endless loop for the control arm but behind the front tire near the rocker panel feel under there and you'll see an oval shaped hole that's where the baby j will go put them on there make sure the straps far enough forward where the cable hookup to your bridal is it bouncing on the oil pan it will definitely break it👍
Boy oh boy I got a white on red tho 40th anniversary
what if a car is lowered on coilovers, bodykit, very little clearance at the front lip AND the car wont start ? not driveable
longer more wood
I'll be having my C3 Vette towed in a month. Thought I'd watch to see what to expect. Yes, us Vette owners are funny. I feel nauseous just thinking about it. (I'm a woman).
Absolutely u can always try to find a tow company with a low pro bed and truck with air drop on top of that throw a few boards down or ramps!
you just need 2*6 5ft long and make a hole in the wood and bed and get a pin to lock in together never ever move up or down again! if you towing Lamborghini add extra 4 foot wood and lock in to the other wood with the pin that’s it
Yah I was thinking of that kind of set up I try to keep extra wood for different kinds of situations always comes in handy doing recoveries and general towing 🪝
The car has tow hooks at the front…why use the suspension to pull on the car???
It worked but not ideal
Yah I’ve towed a dozen Vettes since then all the same way! If you have a better way like I always say do what works for you!
The oval holes in the frame
My truck has rear airbag suspension
Yah I had one like that I wish they had them on 5500s
@Towvibes I drive a FD HINO
I wish you would show your hook points in your video
I did I used the axle straps around control arms easy peasy they loop around and clip to the strap!
Lot work when don’t have breakable bed … I hate aluminum beds
I know but I’d rather throw some wood down on the low cars than buy a 75k $ truck hopefully one day! 🙏 💪🪝
@@Towvibes I know you Willl …be safe
Just invest into race ramps ?
I just evolved into better wood ramps I use them for recovery also!
Not clear on where he hooks the bridle and can't finds any information on the web about it.
Slots in this case I used the axle straps they loop around control arm clamp to themselves
Instead of all the wood just flip your skies upside down roll car up skies because they like ramps when you have em upside down and 2 pieces of 2x6 I do it all the time fast better than using all that extra wood
yes I did that video using skates as ramps years ago on a slammed srt that truck had a huge ram angle!
Get an izusu nrr you wouldn't have to use board's.
I have a 20 jerrdan bed now! low pro that bed angle sucked on the old truck!
Wear gloves. You don't want dirty hands if you hafta get in the car.
I just spit on them a wipe on the seats!
should tell the moron order it's a bad idea to stand behind a car while it's being winched..