that tape trick is magic and makes one think why didn't Kiwi have something like that on the headstrap to start with...thanks for that, I will drink a beer for you
The tape trick was a lifesaver. I could not, for the life of me, figure out how to get the strap through that little space, but the tape made it such a cinch. My daughter loves her Kiwi headstrap for the Quest 2, so when we bought her a Quest 3 for her birthday, I knew a Kiwi strap for the Quest 3 was in our future. Thank you for taking the time to make this!
The instructions that came with the headset were lacking. I was able to follow your video in real time and install. Nice job on the viedo! Great hack with the tape.
That tape trick is mad good, if you don't have tape handy, you can use that sticker that says "pay attention to L and R" that is attached to the head strap, worked like a charm
This trick is so smart it makes me feel dumb because I spent 15 minutes trying to jam it in there and then decided there was no hook. Then I watched your video and fixed it in 30 seconds. Thanks!
Thank you so much for this! Incredibly, the included instructions skip entirely the step of removing the things on the side. Here I am trying to attach them over top 😂 Much appreciated!
I have the Kiwi strap on my Quest 2 and love it, so I purchased it when I ordered my Quest 3. Your tape method was a real time-saver. The only thing about this Kiwi strap I miss is the lens protector that came with the Quest 2 model, which also came with a facial interface.
Just got mine today. Very comfortable. For the step with the tape, you can just easily clip out the facepiece on the Quest and push the strap through, around that awkward slot. It will automatically feed through, then simply clip the face piece back on.
Wow! Thank you so much for this clear and helpful video. The tape trick worked great and saved a lot of time and frustration. I really appreciate you and this video. Thanks!!!
4:10 Damn! Why didn't I think of that trick with the adhesive tape? I removed the facial interface but it was still a bit of a chore to get the strap through. I ended up pushing it into the loop as far as it would go, then used a small metal pin to fish the front of the strap out of there just enough so I could grab it with my fingers. The tape-method looks *much* easier - with less risk of damaging any plastic parts. That said: This is a pretty great strap. I can't compare it to any other aftermarket products, but it sure beats the hell out of that flimsy thing the Q3 comes with. Which isn't saying much, I know, but the Kiwi is an awesome upgrade IMO. Also completely agree WRT the jump in clarity/visual quality between the Reverb G2 and the Q3 - as I made the same upgrade about 10 days ago. Couldn't be happier with the Quest's visual quality and overall performance in PCVR.
I cant do it even with the tape method. What is this design? Why was this made this way with no mention of it anywhere whatsoever? Why is this allowed?
How did this thing get good reviews, no one mentions its physically impossible to install without a particular type of a piece of tape? No one mentions that? What were they thinking? What is this design? Literally, wtf.
Good Video and now a comfortable headset but the unit no longer charges in my ridiculously overpriced Dock. The whole thing is a complete sham with rubbish battery life as an extra.
$60 and I need to use tape to connect it. Pathetic. Been an hour and it won’t come out the other side, almost like it’s too thick. Even without tape. Waste of my $
that tape trick is magic and makes one think why didn't Kiwi have something like that on the headstrap to start with...thanks for that, I will drink a beer for you
Thank you man. Cheers.
The tape trick was a lifesaver. I could not, for the life of me, figure out how to get the strap through that little space, but the tape made it such a cinch. My daughter loves her Kiwi headstrap for the Quest 2, so when we bought her a Quest 3 for her birthday, I knew a Kiwi strap for the Quest 3 was in our future.
Thank you for taking the time to make this!
Thank you man, Im gald that it helps. Cheers.
the trick with tape helped so much!
The tape idea was genius!
Agree !!
Great video! Our internal team also think the tape is genius idea🤣
I was lazy to remove the mask so I was thinking to be much easier for video. xDDD
SECOND ON KIWI OMG OMG
The tip about using tape to get the strap through the slot is brilliant!
Seriously, thanks for the tape trick!
The instructions that came with the headset were lacking. I was able to follow your video in real time and install. Nice job on the viedo! Great hack with the tape.
Thank you mate, Im glad that it helps. Cheers! )))
Thank you so much. Had no idea how to get the sides off, glad I came here first. Tape saved me a lot of frustration.
The tape trick worked a treat! Thank you 😊
That tape trick is mad good, if you don't have tape handy, you can use that sticker that says "pay attention to L and R" that is attached to the head strap, worked like a charm
Thank you very good instruction. Nice and easy
Glad to hear that! Cheers!
Genius!! Excellent tip with the tape, thank you :)
Thank you so much!! The tape tip saved me from a lot of rage. This was excellently explained and demonstrated!!
This trick is so smart it makes me feel dumb because I spent 15 minutes trying to jam it in there and then decided there was no hook. Then I watched your video and fixed it in 30 seconds. Thanks!
Tape trick is genius. Thanks!
the tip with the tape was awesome! i’m subscribed
Thank you man. Cheers.
The tape idea helped a ton thanks!
Thank you so much for this! Incredibly, the included instructions skip entirely the step of removing the things on the side. Here I am trying to attach them over top 😂 Much appreciated!
the trick with tape helped so much too. Dankeschön from Germany!
Fantastic video thanks so much. Your tip with the tape is brilliant 🎉
I have the Kiwi strap on my Quest 2 and love it, so I purchased it when I ordered my Quest 3.
Your tape method was a real time-saver.
The only thing about this Kiwi strap I miss is the lens protector that came with the Quest 2 model, which also came with a facial interface.
Great video! Tweezers to pull the strap through worked for me.
Just got mine today. Very comfortable. For the step with the tape, you can just easily clip out the facepiece on the Quest and push the strap through, around that awkward slot. It will automatically feed through, then simply clip the face piece back on.
So helpful tyyysm, i was afraid to push incase it breaks, but this helpp
Thanx ! The scotch tip has surely saved me from anger 😅
Wow! Thank you so much for this clear and helpful video. The tape trick worked great and saved a lot of time and frustration. I really appreciate you and this video. Thanks!!!
LOVE the tape trick
The tape helped alot
You're actually a hero
The tape though. Seriously great idea. 👍
Holy crap thank you for the tape trick, saved my sanity.
Cool trick with the tape!
Thank you for the video,
I was confused at first thinking that padding is for the face...
I guess I need to buy a replacement for this one too
Subbed for the tape trick
Wow great idea for tape. I seen everyone has to take off facial interface to make it work
4:10 Damn! Why didn't I think of that trick with the adhesive tape? I removed the facial interface but it was still a bit of a chore to get the strap through. I ended up pushing it into the loop as far as it would go, then used a small metal pin to fish the front of the strap out of there just enough so I could grab it with my fingers. The tape-method looks *much* easier - with less risk of damaging any plastic parts.
That said: This is a pretty great strap. I can't compare it to any other aftermarket products, but it sure beats the hell out of that flimsy thing the Q3 comes with. Which isn't saying much, I know, but the Kiwi is an awesome upgrade IMO.
Also completely agree WRT the jump in clarity/visual quality between the Reverb G2 and the Q3 - as I made the same upgrade about 10 days ago. Couldn't be happier with the Quest's visual quality and overall performance in PCVR.
Thank you for sharing!
This helped me a lot🙏🏾
Omg bro thank you so much i was trying to click the headstrap but i didnt realise i needed to click ot that hard, but thanks anyways
Thank you bro, Im gald that it helps.
Thank you. That was so easy thanks to you. The tape idea was genius.
Thanks!
Thank you for the video, this trick helped me!
Thank you, terrific guide 🙂
I love your accent by the way. Thank you
for me i just put the strap thring in the hole and wiggled it around a couple of times till it popped out the top.
instead of using the tape trick i slightly bent the very tip of the strap so when you push it in it turns and comes out the other side
You are the best! Thanks for the tape part so you earned 10 subs(me and my alts)
Thank you mate. Cheers!
THANKS FOR THE TAPE TRICK!🎉🎉🎉🎉🎉
great tip to use tape. so fast. thanks!
Legend!! Thank you 🙏
this helped me thank you!!
Your tip on insert part of Velcro was cool and your vid is cool, how about audio wired headset..?
Tape is a lifeeeeesaver
Bro thank you so much, the tape trick makes it so convenient cause im scared to take the interface off 😭
Thank you man, God bless!
Thank you helped a lot
Tape is clutch 🎉
Genius
I cant do it even with the tape method. What is this design? Why was this made this way with no mention of it anywhere whatsoever? Why is this allowed?
What kind of tape did you use?
Ordinary self adhesive tape
Hello, thanks very much for posting this video! The instructions inclued with the strap were terrible. Stay cool...
How did this thing get good reviews, no one mentions its physically impossible to install without a particular type of a piece of tape? No one mentions that? What were they thinking? What is this design? Literally, wtf.
Good Video and now a comfortable headset but the unit no longer charges in my ridiculously overpriced Dock. The whole thing is a complete sham with rubbish battery life as an extra.
TAAAAAAAPE
$60 and I need to use tape to connect it. Pathetic. Been an hour and it won’t come out the other side, almost like it’s too thick. Even without tape. Waste of my $
You can actually tow a row of 9 Mack trucks with the absolutely ridiculous Velcro they use on this strap. My god. 🤦♂️
Gyatt Ohio sigma
thanks
thanks