Daiwa Kyohga Full Start to finish Service tutorial. Daiwa USA will not service this reel.
Вставка
- Опубліковано 1 жов 2024
- Daiwa USA brought over and sold a few hundred Daiwa Kyohga reels. Unfortunately they are refusing to service what they sold. The sad thing is. I was told when I inquired that Daiwa USA would service this originally JDM exclusive reel.
This reel was sold at JandH tackle. After he couldn't get Daiwa to service the reel. He contacted me to see if I could help.
This is a step by step service tutorial showing how to service your Kyohga.
Tools and Lubricants used.
2.5 mm hex driver amzn.to/3r7IYSm
000 Philips screwdriver amzn.to/2LHIQZu
0 Pozidriv amzn.to/2WqjAJw
12 mm wrench (I most often use this one Knipex pliers wrench 6") amzn.to/3piQNTJ
I used the Roro Trust wrench in this video
Pick set amzn.to/38hsAWH
Lubricants:
Corrosion X oil amzn.to/38qzlFK
Aquashield grease bit.ly/aquashie...
Tsi 321 oil bit.ly/-TSI-321...
(I mix corrosionx oil with the aquasheild to thin, It appears to play nicely and I've used it on about 75 reels in that manner without issue)
I also cut my TSI 321 for small bearings with 100% Isopropyl alcohol which helps in distribution and over oiling as it flashes off
Do not mix TSI with grease.
Join this channel to get access to perks:
/ @tackleadvisors
Make sure you check out J and H Tackle's awesome deals and giveaways!
bit.ly/JandHtackle
And most importantly! Thank you to every single person who spends their valuable time watching the content I put out!
You guys are what make this possible!!!!
Help support real information
The "Thanks bro! Tip Jar bit.ly/TackleAd...
Monthly reoccurring support (changes coming soon here.)
/ tackleadvisors
Subscribe to my channel:
/ tackleadvisor. .
Subscribe to JandH Tackle's channel: bit.ly/JandHtac...
Fishing Reel reviews
Best Fishing reel under $100
Best Reel under $100
Best Reel under $200
Best Bass Reel under $100
Best Bass Reel under $200
Best Inshore reel
Best surf reel
Best beach reel
I’d love to see more of these, especially where to oil vs grease parts on spinning reels and baitcasters.
Simply love these reel service vids. Your Tranx breakdown inspired me and got me hooked . Please keep these coming - your content is gold!
Thanks Shanaka! will do!
You should make more of these. Informative for those who may want to get into servicing their stuff.
Classic Daiwa not standing behind what they sell.
Brought my satiga 20 in diawa refused service cuz it discontinue , never buy a diawa again!
@@hosu5724 yea man, different people have different experiences. I know people who hate the bike company because they sent it in and had to jump through hoops. I never send reels in so for me the most important thing is how easily I can order parts. Only reason I sent my Daiwa in was because it was brand new and I could could tell right away a gear had stripped. I still own several Lexas but I can get all the parts off eBay or third party sites. Just saying a roller clutch from Daiwa is like 40$...a schimano roller clutch never cost me more than 22$
Daiwa has been really good for me, but I haven't sent any reels in for service I just call and order the parts and they send them for free half the time
@@gowrestle160 damn man got real? I deal with them out on west coast. I might try and order some parts cause I got a Coastal that roller clutch had taken a dump.
I see a lot of reels (models sold in the US and models not offered here) for sale on eBay that state that the reel being offered is in Japan. If I'm willing to roll the dice and take my chances on the warranty and servicing is there any other reason to not buy a Japanese reel from Japan? Are these rejects or seconds from the manufacturing process or are they legitimately decent reels?
Hello from Mallorca, Spain. Nice video as always, thank you for sharing your knowledge. Could you please tell me your opinion about this reel. I know you have a very good opinion about Maxel Rage and Shimano Tranx 400, what about this little one???, Thank you
are there more left handed people in the states or what? Is the video just flipped? WHY are there always left handed reels in these videos
I guess that magsealed bearing is ruined now that you oiled it, better add that to the parts list too, hey? 😉
Shit shit shit... I forgot there was a mag sealed bearing.... Fml... Ughh... Doh!
Oops!
I have a Saltiga BJ 100 SH. It looks like the same reel. Does this reel have magseal? I would like to break mine down, but it has magseal. I watched your video on the spinning reels with magseal, it looks like a PITA to get the bearings out. Where is the magseal on the casting reels, on the side plate and in the bearings? Any place else? Thanks, Roger
PS, I found when they side plate goes back on you need to rotate the spool to get those plastic gears to engage, if you don’t they will be damaged. Maybe that’s what happened with the owner of this reel
That's a complicated reel to service. To bad you're on your own with it. I live in Scandinavia and I really hope Daiwa Scandinavia will service my JDM reels I bought over here...even though Daiwa over here are pretty famous for not being very efficient with service. I'd be pretty disappointed if they wouldn't service them. Normark, the distributor of Shimano until this autumn, havn't been good at the service department either so over here you kind of do best by learning to service your reels by yourself.
For me , it's always been neck and neck performance wise between Shimano & daiwa , withstanding (fully submersible reels like van stal , zbass of course) . But I always lean towards Shimano because I've always felt that if you purchase a Shimano reel from a authorized dealer in the usa , Shimano always stand behind their product and I've had a positive experiences with their service department. Now after this , it gives me further pause on buying a high dollar daiwa reels ( I currently own a few of their midrange reels ,which are excellent) because of this video and the fact that a regular consumer cannot directly purchase magseal oil has strengthened my beliefs. Am i misinformed?
I've been thinking of buying a Diawa Ryoga as an all purpose bass, catfish, walleye reel. Anyone have any experience with the Ryoga?
Hello can you make a video of shimano stradic CI4+ full maintenance and what kind of greace you using? Thanks if you can help.
This is gold! I have the same reel, not wanting to service it, it’s a bad move from Daiwa USA, it’s definitely not a “beginners” reel, when it comes to service it...
Daiwa or Shimano should hire you as their lead reel tech. 👍
I have no interest in moving to california :)
I hate working on baitcasters! You are a patient man.
Man..I almost bought one of these till you said they won't service them in US.
Yeah it’s all part of the plan
As always great video. Slowly picking up some of the information you have about reels lol
can you do a comparison between some of the higher end baitcasters from each brand eg: Penn, Shimano, Daiwa, 13 fishing?, Abu and Okuma. Im not sure though. loved the vid great work.
I compared the Steez sv tw to the mgxtreme 2 and antares....I also reviewed the new steez ct70/700. I didn't touch on the new antares though. I haven't touched the new Z or boss..Likely a winter purchase of the new z.
@@TackleAdvisors Thank you!!! at some point I know you have a tight upload schedule but if you got your hand on the penn squall low profile and compared it to a Curado. there art many fair reviews on it yet. thank you so much your channel has been a big help in me finding gear I like. Thanks.
So does this reel have casting control weights? I haven't scanned down the comments to see if asked before, sorry about that if its a repeat question...
Simple 2 pin centrifugal. The pins were removed from this reel.
Sounds like Daiwa USA is about as good as Daiwa Australia. I sent a basically new JDM Daiwa reel to Daiwa Australia after it was submerged due to an upturned kayak in salt water, it took them two weeks to look at it, they then gave me a quote of over $300 to "fix" it. The reel only cost me $300 to buy, I declined the offer and had the reel returned. I dismantled it myself, cleaned and lubricated every part (mag fluid was still in place but has been replaced in a subsequent service by me) and reassembled it. No parts needed replacing and the reel is still working perfectly 8 years later.
Wow, how did you get your hands on legit daiwa mag-sealed oil? The daiwa authorized 3rd party repair shops here refused to sell any. They will only clean and top up the mag seal oil bearings if you sent in the whole reel for servicing.
@@kwong7058 The fluid I used is not genuine Daiwa, my son bought it for me when on an overseas deployment (RAAF pilot). It works fine and seems to be holding up as well as the original Daiwa fluid. Daiwa should be charged by consumer rights authorities for not selling the fluid, as a company I have zero respect for them but they do make some good reels.
250 $
reels still have plastic gears on level wind shame on them
This one is just like the Ryoga. Annoying as hell to work with
Great video...you have a lot of patience.....only one F bomb😏
80's elevator music in the background!
Love the difficulty rating. This video was very interesting
I’m going to buy a spinning reel soon. I’m looking into the lews custom pro speed spin. Is this a good choice?
Daiwa Shimano... Are the only fw spinning reels I recommend everyone else is a distant third... Keep in mind... Shimano and Daiwa are the only companies that make their own spinners in their own factories
have you ever "got lost" trying to reassemble a reel and had to watch the dissasembly to know whats "missing" ... just curious ... greetings from portugal , love your insights about the reels ... merry christmas btw
There was a tiny little washer in a steez ct700 that I didn't know where it came from.... I thought i lost a spacing washer in a talica 2 speed... Big brass /bronze washer.. Hunted for hours... Watched the video.. And I never took it off the gear and it blended in (I was overhauling a pair of them) that's about it in my recent memory
And glad to hear that you enjoy what I put out! And greetings from the other side of the globe :)
What lubricants did you use? (Left out of the description)
Weird, they didn't save. I just re added them.
I wish you could service my Daiwa pluton
I have a new daiwa certate lt 4000 2019 and it is really geary and I try to open it and add some penn grease and it got a bit more geary so how do i fix it can you teach me please
If a reel gets geary... Grease usually won't make a difference... Send it in for service.. You can't do much without the side plate tool.. Adding Penn grease on top of Daiwa grease likely didn't do much to help.
@@TackleAdvisors thank you for the advice
Reels looking good ! I can't wait to get it back!👌
Man I need to find some thick grease for my reels.
wait so youre saying if daiwa refuses to fix one of my reels i can just send it to you.
LOL....sorry but no. This was a favor for JandH tackle who's a good friend and supporter.
@@TackleAdvisors well i have almost all penn reels anyway, my first daiwa is underwater somewhere and my second one is filled with a birds nest that i dont want to untangle.
Tackle advisor....what does it possibly mean when you feel in a bait caster and you hear noise like something is hitting something inside the handle side plate when you reel in line plus also a slight stoppage every full rotation?
Usually something not good... Too tough to tell without seeing it first hand. If something is clanking around it may or may not have something to do with what's causing the bind up.. Got to crack her open and take a look... Just a guess could be one of the yoke rods at the pinion... Gear teeth of the worm or even main or pinion... Could even be a bearing retaining clip
@@TackleAdvisors unfortunately, this is a aldebarron BFS reel. You can also feel the clicking when you feel in line.
@@TackleAdvisors just so you know, I devour your videos like food after I haven't eaten for three days!!
@@TackleAdvisors i just got my tranx 201hg which I will use as my replacement. My tranx 301 is awesome but won't throw anything under 1/2oz. Plus it's heavy for my fishing which involves casting 1000 times each session in creeks for reds
Why would that line guide move with the clutch pressed ?
It's a synchronise line guide system, pretty common for light to medium-light saltwater or heavier freshwater fishing. It's to prevent the line guide from snapping off during quick first runs or heavy load retrievals. Also helps with line management- the braid is always laid inline with line guide, smoother payout of line, less likely-hood of line breaking from friction rub against line guide.
would you recommend this reel for jigging for tog?
I think it would be perfect for that.....light line to make direct contact, lots of power....super refined....and a clicky drag for lotsa fun :) But it's a one trick poney. And if there's an issue..you are on your own
Can you do a KastKing Royale Legend II GT
Hohoholiawww
Last time I went hiking there was an old squirrel in the pathway and he told me that you should never buy daiwa reels. They are not good unless you like there expensive reels. I said thank you and never did buy a daiwa
Hello from Malaysia
Hola!
Your late.
Guilty....and wrong your :)
That's one ugly color. Purple 🤮