Arduino Multimeter V1.0 | DIY Arduino Project | Voltage, Resistance, Continuity tester and more
Вставка
- Опубліковано 13 лип 2024
- Hi guys ! Today we are going to make DIY Arduino Multi meter. A multimeter is one of the most necessary tools when working on electronic projects. While you can buy a multimeter in two types, analog and digital and also you can get a multimeter in different price ranges. We can make a multimeter using an open source platform like Arduino. So today in this video we are talking about how to make an Arduino multimeter very simply and using less components.
Component list-
(For multimeter)
Arduino NANO or UNO x 1
SSD1306 inch 0.91 OLED display x 1
10K Resistor x 1
2K Variable Resistor x 1
200K variable Resistor x 1
Vero Board x 1
Push Buttons x 3
Switch x 1
Circuit Wires
Buzzer x 1
LED x 1
Male and Female Pin headers
(For rechargeable battery)
TP4056 Module x 1
CKCS BS-01 or 5V step-up module x 1
Li-ion Battery x 1
Arduino Multimeter Project Code and File link
drive.google.com/file/d/14zTZ...
Password - The ElectroRoot
0:00 Intro
0:45 Introduction
1:32 What you need?
2.30 How it works?
5:59 Let's make DIY Arduino multimeter
7:48 Resistance / Continuity / Drop voltage section
8:45 Voltmeter section
10:00 Analog section
10:13 PWM signal generator section
10:26 Rechargeable Battery section
11:05 Final touch
12:10 How to calibrate DIY multimeter
14:25 How to use DIY Arduino Multimeter
------MORE VIDEOS------
Power Bank Module
• Power Bank Module - Ty...
Li-ion/LiFePo4 Battery Protection 100A BMS 3S 4S 5S 12V 16.8V 21V
• Li-ion/LiFePo4 Battery...
IP2312 Quick Fast Charging Board.
• IP2312 Quick Fast Char...
SZBK07 300W 20A Buck converter
• SZBK07 300W 20A Buck c...
How to make Power Backup UPS For Router and Modem
• How to make Power Back...
Wireless Charger Transmitter And Receiver Modules.
• Wireless Charger Trans...
PWM solar charge controller
• PWM solar charge contr...
How to modify TP4056 module
• How to modify TP4056 m...
ECC Easy Chip Charge Module
• ECC Easy Chip Charge M...
Tp4056 Li-ion battery charging module
• Tp4056 Li-ion battery ...
How to use CKCS BS01 Mini DC-DC Step Up Module
• Tp4056 Li-ion battery ...
How BMS modules are Working
• How to make Li-Ion Bat...
How to make Power Backup UPS For Router and Modem
• How to make Power Back...
How to use XL-6009 Buck Boost convertor
• How to use XL6009 Buck...
XH-M604 Battery Cut-Off Module With Display. Configuration and Full Review.
• XH-M604 Battery Cut-Of...
Thanks you so much
Excelente video amigo, tienes un nuevo suscriptor
මේක සුපිරියක්
Excellent work..👍🏻
thank you
Great video
thank you very much
Bravo
Supper
thank you very much
👌👌👌
🤜🤛
හෝද පැහැදිලි කිරීමක් ස්තුතියි
බොහොම ස්තූතියි
thanks ... waiting your update ...
Please tell me, what program did you draw the diagram with?
keyak yaida aiye badu walata😊
loku ganak yanne na. arduino nano ekatai display ekatai witarai witadamak yanne . online order karanawanam 2000 k wat yana ekak na
Can you add the provision to measure AC mains voltages
yes we can modify this system. in this way i only use very simple components to circuit. in next time let’s make much better multimeter with additional components
Uda link eken pennanne na Download karata
link eka wada. aye poddak try karala balanna. hari nogiyot kiyanna mn oyata whtsapp karannam. drive.google.com/file/d/14zTZI0KieTvZy3Ie1t63RU6YjXojtqc4/view?usp=sharing