buenas, podria usarlo para hacer video mapping ? darle salida de la tarjeta grafica de mi computadora de un video 4k para distintos proyectores y formar una sola imagen con todos los poyectores formando el video que tengo en mi pc en una superficie mapeada con un software ?
Can I connect the Splitter's LAN port signal to a Managed Network PoE Switch (TL-SG2428P) and connect CAT7 Cable from another port in the Network Switch to the Receiver box and still get 4K or will it even work?
@@OREI-COM Why it will not work? Is the signal that is sent between the RJ45 ports in the receiver and transmitter a proprietary one and not confirming to standard network protocols?
If i connect computer as input and want to output it to 4 single monitors. So will this work? Or it can only duplicate picture? I bought a similar one and it only duplicate picture. Not extend the picture.
We want to send a HDMI signal from one location to another, about 13 kilometers between. They are connected in the same network, with a fiber cable going between the locations. Would this solution work for us? :)
Hello, I am currently using UHD18-EX115-K model. I have my ethernet cat6 wired in the house that runs together with power lines and UHF coaxial. I noticed that when I connect the cat6 in to the TX box, my UHF signal will be lost. It happened to all 3 output TVs I have in the house. May I know why? I was thinking to disable the PoE for testing but wonder how i can achieve that too. Thanks.
@@OREI-COM I believe I am not using the shielded cat6 type and unfortunately I have my cabling concealed in cement wall. So it is possible that the PoE feature causing the interference? I was on one-to-many HDbitT 1080p setup before without PoE and there were no issue. 😔
Can you hide the receivers in wallplates? I am remodelling the house and these seem the best solution but I want to simply plug into a HDMI wallplate rather having a Reciever box sticking out at every point as it doesn't look neat
Hello... Now i bought the product of 1X8 1080p HDMI Extender that support 120 meter now i have a very big and serious problem The Output videos always not stable and the signal comes and goes I can't make it stay good only for minutes . I even bought a new card " Nividia gtx 760" and replaced my old HDMI Cable with a new one which even support 4k videos my videos are all 720p in mp4
@@OREI-COM drive.google.com/file/d/1kE3O0iRP2P-amLf_rfdaAJYfvLH3e34O/view this happens always The Kit number : 1080P 1x8 HDMI Extender Splitter by Orei Multiple Over Single Cable CAT5e/6/7 Full HD with IR Remote EDID Management - Up to 400 Ft - Low Latency - Full Support, 1x8 HDMI Extender - 395 FT (HD-EX108) The purchased link: www.amazon.com/gp/product/B08HNK47WX/ref=ask_ql_qh_dp_hza
still have to run ethernet cables to the receivers? i thought it’s a wireless setup! Hahaha & all those distance of more than 100 feet doesn’t make any sense when you’re still using cables(either ethernet or HDMI cables, & we’re talking about MORE cables lol)
Exceptional tutorial on the splitter and how to set it up. I'm sold! Thanks!
is this usable thru a home network, ethernet switch, router or modem, or is this only useble whit a direct ethernet cable line
Hi. Thanks for the video. Is there anyone i could link up with before making purchase for a couple of specific questions for our requirements?
My man just what I needed to watch love from UK
But how 10G cable can pass through 18G signal required for 4K@60Hz?
Is it also applicable from desktop computer to multiple tv displays?
buenas, podria usarlo para hacer video mapping ? darle salida de la tarjeta grafica de mi computadora de un video 4k para distintos proyectores y formar una sola imagen con todos los poyectores formando el video que tengo en mi pc en una superficie mapeada con un software ?
@orei can this product be use on my NVR reolink for my cameras? Because I want to have multiple access on my 3 Tvs and 1 desktop
This is new to me and very neat I’ve just mirabox brand thinking which one should buy I really love your teachers video
Can I connect the Splitter's LAN port signal to a Managed Network PoE Switch (TL-SG2428P) and connect CAT7 Cable from another port in the Network Switch to the Receiver box and still get 4K or will it even work?
No, this will not work through a network switch, it needs to be a direct connection.
@@OREI-COM Why it will not work? Is the signal that is sent between the RJ45 ports in the receiver and transmitter a proprietary one and not confirming to standard network protocols?
Will this work with my Reolink Security Camera Sytems NVR? Trying to watch my cameras on multiple tvs throughout my house.
Yes, it will work with an NVR as well.
@@OREI-COM thank you
Hello, how do you update the system?
If i connect computer as input and want to output it to 4 single monitors. So will this work? Or it can only duplicate picture? I bought a similar one and it only duplicate picture. Not extend the picture.
when we connect it to set top box as HDMI in - can we watch different channels on different TVs at same time?
No, unfortunately, that is not possible. You can only view the same channel on all TVs at the same time.
What if I want to run multiple sources to multiple displays
We want to send a HDMI signal from one location to another, about 13 kilometers between. They are connected in the same network, with a fiber cable going between the locations. Would this solution work for us? :)
Can it work for audio only? I wanted to send audio to my sound bar from my projector
Hello, I am currently using UHD18-EX115-K model. I have my ethernet cat6 wired in the house that runs together with power lines and UHF coaxial. I noticed that when I connect the cat6 in to the TX box, my UHF signal will be lost. It happened to all 3 output TVs I have in the house. May I know why? I was thinking to disable the PoE for testing but wonder how i can achieve that too. Thanks.
@@OREI-COM I believe I am not using the shielded cat6 type and unfortunately I have my cabling concealed in cement wall. So it is possible that the PoE feature causing the interference? I was on one-to-many HDbitT 1080p setup before without PoE and there were no issue. 😔
Can you hide the receivers in wallplates? I am remodelling the house and these seem the best solution but I want to simply plug into a HDMI wallplate rather having a Reciever box sticking out at every point as it doesn't look neat
@OREI Interesting. How about if I use a RJ45 wallplate and then connected another cat6 cable to the receiver? Might start causing issues?
Does it work over standard L2/L3 network equipment?
This Extender requires a direct connection between the Transmitter and Receivers. It cannot be connected through a network switch.
Are these 1gig or 10gig Ethernet ports?
Hi when will they come out with an HDMI Spiltter 2.1 4K 120 for ps5 and Xbox series x
@@OREI-COM yes!!!
@@OREI-COM Has this been released yet? Also would 4k 120hz be supported over Cat6?
im looking for a HDMI 2.1 version. i want to game at 4K 120hz HDR and VRR
We are currently working on a lot of new products. An HDMI 2.1 version may be available in the near future.
zero latency?
Hello... Now i bought the product of 1X8 1080p HDMI Extender that support 120 meter
now i have a very big and serious problem
The Output videos always not stable and the signal comes and goes
I can't make it stay good only for minutes .
I even bought a new card " Nividia gtx 760"
and replaced my old HDMI Cable with a new one which even support 4k videos
my videos are all 720p in mp4
@@OREI-COM drive.google.com/file/d/1kE3O0iRP2P-amLf_rfdaAJYfvLH3e34O/view
this happens always
The Kit number :
1080P 1x8 HDMI Extender Splitter by Orei Multiple Over Single Cable CAT5e/6/7 Full HD with IR Remote EDID Management - Up to 400 Ft - Low Latency - Full Support, 1x8 HDMI Extender - 395 FT (HD-EX108)
The purchased link:
www.amazon.com/gp/product/B08HNK47WX/ref=ask_ql_qh_dp_hza
Nice
👍👍👍
still have to run ethernet cables to the receivers? i thought it’s a wireless setup! Hahaha & all those distance of more than 100 feet doesn’t make any sense when you’re still using cables(either ethernet or HDMI cables, & we’re talking about MORE cables lol)