Це відео не доступне.
Перепрошуємо.
OREI 1x4 HDMI Extender Splitter Over CAT 6/7 Cable up to 165 Ft [Installation Guide] HD14-EX165-K
Вставка
- Опубліковано 20 сер 2020
- This OREI HD14-EX165-K allow to distribute 1080P signals from 1 HDMI source to 4 HDMI displays over CAT6/7 network cable upto 165 feet
Buy at: - www.orei.com/p...
The OREI HD14-EX165-K HDMI extender splitter allows you to transmit HDMI audio/video signals over Cat6/7 cable along with maintaining original audio/video quality to up to 4 displays remotely.
It supports up to 1080p resolution and extends the transmission distance up to 165 feet (50 meters).
Durable and easy to set up and operate without any software installations.
Ideal for businesses, churches, test bench facilities, data centers and help desks to duplicate HDMI signals at long range.
HDMI Loop-out - Connect HDMI display to the transmitter (sender unit) for an output to local display at the source.
IR control - enables source device to recognize remote commands from remote display side.
Power Over Cable - only use one included power adapter at transmitter (sender) side to power all the receivers
EDID Management - multiple EDID configuration options to select the perfect resolution and audio output settings for your connected displays.
For More Audio Video Accessories visit us at www.orei.com
bit.ly/3U9wVRL
#extendersplitter #hdmisplitterextender
Best presentation of this, the clarity of the speaker and the examples are top notch. This sets the precedent of hardware tutorial explanation and presentation in my book. Well done!
Just installed one of this today at a local Gym... the PoE feature is worth every cent! Works perfectly!! Thank you OREI for this great product!
@@OREI-COM Also, really loved the Power Adapter security feature and the metal cases. Very good product!
I love this
very nice expelation
Can Orei be seen through NDI? I use V Mix and OBS
My church has pre installed cat5e, will this work with it? They have 6 TV's
Is this using audio over ethernet to send audio to the receiver location?
Glad I watched this video 1st b4 ordering it because I thought it was wireless. Thanks though
Glad I could help
hi is the advertised distance between the splitter and monitor or total distance from source to monitor?
If I need to cover more distance, around 250 feet, what would you recommend to extend the signal?
Great video..I'm new to this topic, say I want to connect my computer to 8 TV's, it's for a bar-restaurant, but I want to show different videos to each with no sound...does this extender allow me to do that or it will mirror mi pc? And if this extender helps me out, do I follow the same procedure as shown in the video?
@@OREI-COM is there a product like this that does this??
Hi so I got my extender with ARC on Saturday so i'm still new to this AV system world. I have a Marantz 8K SR5015. Since I'm trying to run Dolby atmos through ARC or my surround with HDMI ARC. I also have an AV Rack to a central location. I was wondering which goes where, I get confused when I see in the back of the AV receiver 8K OUT ARC. I would have thought my projector would be the one being the OUT or the receiving end. At least i got both extenders to light up showing arc on it. Currently i have the "sender" on my HDMI ARC port from the projector and receiver with my AV which I hooked up to the 8k ARC out. Both extenders are hooked up to a lan line with cat 6 cables. My AV rack is about 25 feet away from my main projector. Can you please help or tell me what i am doing wrong?
@@OREI-COM Ahhhh I bought the 132AR-K. So what is the difference? So with what I have I need another connection to go with my AV? Ok I will email
@@OREI-COM THank you for the response it helped. One more question. I plugged in the IR blaster and receiver and it doesn't to work. Does the RS323 have to been installed on the extender as well for the IR to work?
I want to setup four TVs at my house and watch both NFL games, NFL Redzone, and the NFL Network all at the same time. Will this be able to help me with that?
No, this will duplicate the same media on all of the connected monitors from a single HDMI source.
Do you have any product that will work with 4K?
If want to transmit to 100 meter then?
You can use the UHD14-EXB400-K
Does it work fine if the source is a PC Desktop or Laptop , I'm asking specifically about the product { " 1080P 1x8 HDMI Extender Splitter by Orei Multiple Over Single Cable CAT5e/6/7 Full HD with IR Remote EDID Management - Up to 400 Ft - Low Latency - Full Support, 1x8 HDMI Extender - 395 FT (HD-EX108) "} .
can I change the power source , Here we use The { INPUT : AC 100-240V 50/60HZ ,, }or the power sources that will come with it do fine ?
@@OREI-COM Hello... Now i bought the product of 1X8 1080p HDMI Extender that support 120 meter
now i have a very big and serious problem
The Output videos always not stable and the signal comes and goes
I can't make it stay good only for minutes .
I even bought a new card " Nividia gtx 760"
and replaced my old HDMI Cable with a new one which even support 4k videos
my videos are all 720p in mp4
I bought your product and put 4 tv the first at 10 meters the second at 20 meters and 2 at 30 meters and it does not work, it does not send an image, all our cables are populated, the device only works with a 1 meter rj cable like the one in the video I think they cheated on me with the product
We have the same issue. But we didn’t try the dip switch settings. Going to try this on Monday. I’ll post the results on we did and what works and what didn’t work. Thanks.
@@OREI-COM ok so we tried it and set the setting to its maximum length it would work intermittently. Using this in a church setting to show the service in remote rooms. Tinkered with the settings but it was a bit random on when it work or not. We seemed to get more success on port 1 going down the numbered ports display would be worse and look pixelated. We decided to return the product. We were hoping for something a bit more more plug and play. We went to straight Hdmi working off splitters. 😞