Do they communicate via IP Protocol? Can you configure the IPs? Subnet Mask? Default Gateway? Maybe via a DHCP server? I'm thinking about using them from different subnets, so they would have to communicate via a gateway
Hello, I bought an extender pair (transmitter/receiver) and it works fine. I will soon buy another pair because I use two monitors. In the user manual, it is written the following: "When using multi-connection, the 1000 Mbps network switch should support IGMP protocol (Not IGMP snooping)". Can you give an example of a not very expansive switch that will work? What means "Not IGMP snooping" ? I see two meanings: a) It is enough for the switch to support the IGMP protocol. It can support also IGMP snooping, but it is not mandatory; b) A switch that supports IGMP snooping will not work. It should only support the IGMP protocol. Which is the correct meaning? I intend to buy a switch, but many of them support IGMP snooping, so I am not sure if they will work. Thank you!
Does this work with protect display content? Like Disney streaming or Netflix? Also what if you pug this device through a managed network switch, utilising existing cables instead of laying a dedicated ethernet cable? And what about Vlans for security reasons.... also protocol dpes it use?
It compatible with HDCP 1.1, if your source is HDCP protected, your display also must support HDCP. Use Cat5e/6 ethernet cable with T568B order. It canbe managed by VLANs, and the network switch must support IGMP protocol (Not IGMP snooping) if you use several transmitters in a local area network.
Do I need to connect the IR cable if all I want to do is to connect from remote PC to my PC? what if I have walls between rooms? Regarding the CAT6 cable - do I need a crossover cable? (If I'm not connecting through a switch)
If you don't need to use IR you could leave IR cables don't connect. It doesn't matter whether there is wall. Don't use crossover cat cable, follow T568B standard.
The KVM extender don't support DHCP, they all have self IP addresses, but they can work in a LAN with IP address range 192.168.1.0/24 (or other range like 192.168.3.0/24) . We don't suggest to put the extenders and other network devices in a same LAN. If you did need to do this, you should use a network switch which support VLAN configuration and separate the extenders from other network devices.
Hello I want to extend the signal from a PC Gamer to a 1080p TV screen, is there a problem with the FPS (frame per seconds)? Or that refresh rate of the image is given by the monitor or the video card? In my case it would be an Nvidia GTX1070. regards
Do you guys do something that would use dhcp assigned ips? i'm looking to add 10s of hdmi outputs and have accessible over a kvm output. Ideally i'd have an 8 or 16 port kvm per rack if you guys do that?
Not sure if you're still searching, but they have different hdmi switches, hdmi KVMs and HDMI Matrix solutions for 19 inch racks and up to 16 devices available on eBay and Amazon. Currently I have their 8x8 Matrix in use.
2 questions: 1. Will there be a 4-USB port version or USB 3 version with 4 ports? keyboard and mouse is great but many times someone would like also to connect disk-on-key etc... 2. Where can i buy your products like model HKE1011A7U?
Hello, if you want to buy our products, you can send an email to this email（sales@tesla-smart.com） to ask for specific details. our sale colleague will contact with you in the first time.
I can use this devices over internet connection? I’m searching for a solution to control remotely my Cable TV box and watch my paid TV cable channels when away from home.
This device will not work over the internet. Good news though, you can create a free TeamViewer account and install it on any pc you want to remote control
Is audio also transmitted or just video? I want to send what my computer screen to all the TVs in my house, but if audio isn't transmitted too it defeats the purpose..
This is the audio and video transmission at the same time, you can transmit your computer information to each of your rooms, but the transmission distance is within 120 meters.
Hello, the purpose of building two switches is to let users know that our equipment can transmit audio and video signals through a local area network. Of course, we can use only a single switch or more than two switches to build this LAN.
Hello, thanks for the information,, to transmit different videos to several screens, how can I do it? You know that I have a funeral home and I want to put screens to process a photo of the person with the data of the same, as well as a small video type that is reproducing all day. There are 4 chapels, then there would be 4 different videos with 4 different screens. You tell me I have to have 4 PC? or 4 different devices (sources) to transmit? Can not do everything from a single PC? Thanks in advance. regards
Hi, a very late response but maybe you can still use it. Try Aster Control (www.ibik.ru/) with this system. You can split 1 pc to many virtual pc's works great for me.
Hi, I would like to use this but over PowerLine plugs from one room (living room with Sky-Q Box) to another room (bedroom) could that work ?. if so, I presume the powerline units would have to be of a certain spec/speed - can you elaborate. Many thanks
Hello, for this video, due to limited space, we only connected 4 receivers. Actually, this product can support up to 16 transmitters and 253 receivers.
Thank you for your message. The USB extender in the video can only extend the keyboard and mouse signal. We have another one that can support extended USB2.0. You can follow us. We will bring you more new products in the future.
¿Puedo utilizarlo en una red local inalambrica? de la siguiente forma: transmisor > punto de acceso en modo puente > estacion en modo puente > receptor. Espero me entiendan.
The fiber optic modem has LAN input. So your devices support the IPv4 LAN protocol? They have a range of network numbers from 192.168.0.1 to 192.168.0.16. Or am I wrong?
Thanks for the very quick and detailed answers! And one more question. The standard request on a local network from transmitter 192.168.168.50:8080. Or are you using a different port?
This has high latency, I can't use it for 3D designing or creative work, the latency is very annoying, imagine if it was for gaming. its good enough to check on your server.
Great achievement, this technology was develop by newtek. This is also very good for video conferencing & video links for long distance viewer.
Oh, my friend, thank you for your support.
Do they communicate via IP Protocol? Can you configure the IPs? Subnet Mask? Default Gateway? Maybe via a DHCP server?
I'm thinking about using them from different subnets, so they would have to communicate via a gateway
Hello, this is used in the local area network.
@Tesla-smart is this available in UAE? May I know if you have distributor here. Thank you.
Hello, I bought an extender pair (transmitter/receiver) and it works fine. I will soon buy another pair because I use two monitors. In the user manual, it is written the following: "When using multi-connection, the 1000 Mbps network switch should support IGMP protocol (Not IGMP snooping)". Can you give an example of a not very expansive switch that will work? What means "Not IGMP snooping" ? I see two meanings: a) It is enough for the switch to support the IGMP protocol. It can support also IGMP snooping, but it is not mandatory; b) A switch that supports IGMP snooping will not work. It should only support the IGMP protocol. Which is the correct meaning? I intend to buy a switch, but many of them support IGMP snooping, so I am not sure if they will work. Thank you!
Need to support the IGMP protocol switch, and in the switch configuration interface, turn on the switch of the IGMP protocol
hello can you give me the network switch spec that i can use?
Is it possible to achieve it with camcorders by converting the hdmi output to ip and make a multicamera from a distance of more than 200 meters?
Mümkün mü?
Does this work with protect display content? Like Disney streaming or Netflix?
Also what if you pug this device through a managed network switch, utilising existing cables instead of laying a dedicated ethernet cable? And what about Vlans for security reasons.... also protocol dpes it use?
It compatible with HDCP 1.1, if your source is HDCP protected, your display also must support HDCP. Use Cat5e/6 ethernet cable with T568B order. It canbe managed by VLANs, and the network switch must support IGMP protocol (Not IGMP snooping) if you use several transmitters in a local area network.
I want to use the transmitter without the receiver... connect from my laptop to my server. Like tightvnc or something
Hello,This one needs to be used in pairs.
Do I need to connect the IR cable if all I want to do is to connect from remote PC to my PC? what if I have walls between rooms?
Regarding the CAT6 cable - do I need a crossover cable? (If I'm not connecting through a switch)
If you don't need to use IR you could leave IR cables don't connect. It doesn't matter whether there is wall.
Don't use crossover cat cable, follow T568B standard.
Hi, work with mouse and keyboard wifi??? Work in a Lan network with DHCP range 192.168.1.2-255??
The KVM extender don't support DHCP, they all have self IP addresses, but they can work in a LAN with IP address range 192.168.1.0/24 (or other range like 192.168.3.0/24) . We don't suggest to put the extenders and other network devices in a same LAN. If you did need to do this, you should use a network switch which support VLAN configuration and separate the extenders from other network devices.
Can i use joystik on this device?
Hello
I want to extend the signal from a PC Gamer to a 1080p TV screen, is there a problem with the FPS (frame per seconds)?
Or that refresh rate of the image is given by the monitor or the video card?
In my case it would be an Nvidia GTX1070.
regards
Hi ,please can it be used with point to point wireless radios if it's not possible to run cables?
Example is to link CPE 210
Do you guys do something that would use dhcp assigned ips? i'm looking to add 10s of hdmi outputs and have accessible over a kvm output. Ideally i'd have an 8 or 16 port kvm per rack if you guys do that?
Not sure if you're still searching, but they have different hdmi switches, hdmi KVMs and HDMI Matrix solutions for 19 inch racks and up to 16 devices available on eBay and Amazon. Currently I have their 8x8 Matrix in use.
oh, friend, thank you very much for your reply
Hello, your specific needs can be emailed to us: social@te-smart.com
2 questions:
1. Will there be a 4-USB port version or USB 3 version with 4 ports? keyboard and mouse is great but many times someone would like also to connect disk-on-key etc...
2. Where can i buy your products like model HKE1011A7U?
Hello, if you want to buy our products, you can send an email to this email（sales@tesla-smart.com） to ask for specific details. our sale colleague will contact with you in the first time.
Why is there latency on KVM?
I can use this devices over internet connection?
I’m searching for a solution to control remotely my Cable TV box and watch my paid TV cable channels when away from home.
This device will not work over the internet. Good news though, you can create a free TeamViewer account and install it on any pc you want to remote control
Sorry, we don’t have a remote plan yet
Oh, friend, thank you for your reply.
can i use wireless keyboard and mouse on the Receiver side with the usb ports for keyboard and mouse?
Yeh just add a Bluetooth dongle to it
Hello, support wireless keyboard and mouse for office use
Is audio also transmitted or just video? I want to send what my computer screen to all the TVs in my house, but if audio isn't transmitted too it defeats the purpose..
This is the audio and video transmission at the same time, you can transmit your computer information to each of your rooms, but the transmission distance is within 120 meters.
What length does it support between TX & RX... For cat6
Where it is available in India...?
Hello, this one supports up to 120 meters. We have not sold it in India for the time being. Are you using it for personal use?
on "One to Many" why you have to use 2 Network switches?
Hello, the purpose of building two switches is to let users know that our equipment can transmit audio and video signals through a local area network. Of course, we can use only a single switch or more than two switches to build this LAN.
Hello, thanks for the information,, to transmit different videos to several screens, how can I do it?
You know that I have a funeral home and I want to put screens to process a photo of the person with the data of the same, as well as a small video type that is reproducing all day. There are 4 chapels, then there would be 4 different videos with 4 different screens. You tell me I have to have 4 PC? or 4 different devices (sources) to transmit? Can not do everything from a single PC? Thanks in advance.
regards
Yes, if you want 4 different videos with 4 different screens, you should have 4 input devices.
I hope my answer will help you.
Hi,
a very late response but maybe you can still use it.
Try Aster Control (www.ibik.ru/) with this system.
You can split 1 pc to many virtual pc's works great for me.
Hi, I would like to use this but over PowerLine plugs from one room (living room with Sky-Q Box) to another room (bedroom) could that work ?. if so, I presume the powerline units would have to be of a certain spec/speed - can you elaborate. Many thanks
Hello, do you want to transmit the video signal to the far end? This is a video extender that can extend the video signal by 120 meters.
Hmmm
Nice thanks for information
You are welcome, friends, you can follow us and bring you more information.
what is the IR used for?
What kind of lag if any can one expect from this? Is Audio transmitted also?
Hello, there will be a delay, because there is a switch that can output audio.
how about audio? no connector for audio?
HDMI has its own audio output. If your output is equipped with speakers, there will be sound.
So its extender or it works with LAN, with switches and routers?
Also, does it support mouse USB in and out?
Yes，it can work with switches and routers, and it supports mouse and keyboard.
Tesla -smart ok, where i can get one on Poland? I need to test it
Yeah, you can send an e-mail to this adress: capricornus@tesla-smart.com
How get address more??? Only 4 receiver??
Hello, for this video, due to limited space, we only connected 4 receivers. Actually, this product can support up to 16 transmitters and 253 receivers.
Thanks for answer my question ❤️❤️❤️
Thanx for the video. Tell me please will it works by switch? or it works only by direct cabel connection?
Hello, this extender needs to be connected to a power source to work.
can i use it for my settup box to see in 3 tv in real time different channel ??
If your input source is 3, then you will be able to achieve 3 different display contents.
I am interested in purchasing this, is there a USB 3.0 model? also where can I purchase?
Thank you for your message. The USB extender in the video can only extend the keyboard and mouse signal. We have another one that can support extended USB2.0. You can follow us. We will bring you more new products in the future.
@@tesla-smart969 one year later lol
@@PistolPete1980 We will reply quickly in the future.
@@tesla-smart969 upping your online presence game. That's respectable. Good Luck to you :)
¿Puedo utilizarlo en una red local inalambrica? de la siguiente forma: transmisor > punto de acceso en modo puente > estacion en modo puente > receptor. Espero me entiendan.
Yes, it can be used in wireless networks, but it is not stable.
I want to turn on your devices in different cities on the Internet by using DynDNS. Is it possible?
Our devices support Fiber-Optic converter to extend transmission distance up to 20KM.
The fiber optic modem has LAN input. So your devices support the IPv4 LAN protocol? They have a range of network numbers from 192.168.0.1 to 192.168.0.16. Or am I wrong?
Our devices support the IPv4 LAN protocol, but it doesn't support DynDNS, and the range of network numbers from 192.168.168.50 to 192.168.168.65.
Thanks for the very quick and detailed answers! And one more question.
The standard request on a local network from transmitter 192.168.168.50:8080. Or are you using a different port?
The request in the local network from the transmitter is 192.168.168.50:80.
where to buy and does you ship it to algeria wanna review it
We have opened an Amazon platform.
Is that based on hdbt which is on 18gb?
Sorry, this does not support HDBT
@@tesla-smart969 poor
Does it work over 4 switches?
Yes, it can work over 4 switches, but there may be some delay.
Tesla -smart what if the switch has live traffic going on?
Our extender is best to use the switch alone, with other devices may have some interference.
This has high latency, I can't use it for 3D designing or creative work, the latency is very annoying, imagine if it was for gaming. its good enough to check on your server.
Yes, you are right! We are also continuing to optimize it and improve its performance.
really ? I was hoping it would not ...
IP in this case is an abbreviation of Iron Pony. Has nothing to do with Internet protocol.
Shop address：tesla-smart.en.alibaba.com/
Official website：www.tesla-smart.com/
It is prefect
@: RiV ALDO JAPPEN
👍💖🐇🦄💯👍
Nice where tobuy
Can you provide model number or purchase link
The model number is: HKE12MMA10, you can visit the website and contact the service for more information. www.tesla-smart.com/
Not wireless with cable?????????
No, it is not wireless, should be connected to LAN with cat cable.
@@tesla-smart969 what is IR then?
This is a horrible explanation, you should have a DIAGRAM . Link to some pictures so you can see in one image what connects to what
Thank you for your good suggestion!