wassup man. im really glad i found youre channel. im after buying one of this quads in rough shape for a project. and thatnks to you im learning a lot about them. thanks so much man
@@Schneids15 let me know if you come this way. Be glad to show you around. Question. Some people have been swapping out their petcock out with a yamaha petcock to get away from the diaphram. do you think this would work?
That would be great! I should have you shoot me an email. My email is in the about section of youtube. You could swap the petcock but honestly i just plug off the vacuum line at the carb and the petcock and use reserve or on and have never had an issue.
@@Schneids15 yes i have done that, cleaned the carb, checked the petcock, but it will only run good on prime. otherwise it dies after a few seconds and is hard to start.
That’s a good idea. I like watching it by myself with a light because i can see exactly when i am at overlap. Of course way easier to do off camera. Lol
Man mine is being a pain starts one time doesnt start another time.. did a carb rebuild on it now it's like almost wants to start but doesn't so fires but just not enough to start almost like flooding.... I give up any ideas?? Could it be value clearance for hard starting?? Thanks in advance
hi! I got a question about my quadrunner 300 1992. The front diff is making weird clicking noise sometime when I turn or push the 4 wheeler when its off. Even if the 4x4 is not engaged. I wonder what can cause that? bad oil? borken gear or something else? The 4x4 still work, but the diff lock i'm not shure.
Great as usual. Love the videos about the kingquad 300. Just aquired a 2000 Kingquad 300 with only 1928 KLM on it but seems like it is stuck in gear because I can't shift any of the levers. Any ideas. Thanks.
My quad is hard to start when cold i put choke start shut off like 5 sec after when give throttle die too and after like 1 min finish take gaz and run when hot start easy and run great
An easier way is to stick your finger over the hole. When valves are both closed, the piston pressure will "pop" your finger off of the hole. If you have a buddy you don't really care for you can put the spark plug against the back of his hand to verify, hahaha
Has anyone had their king quad have a very hard start,I mean like starter wines for a bit then will turn over,some times it will turn over a few times but very hard.replaced starter same thing,pull plug turns over fast put finger over plug hole and stops turning over,I’m lost
Thanks always enjoy your King Quad 300 videos,very informative. Not many videos out there for this machine.
your videos helped me get a 95 model back up and running after sitting for over 2 years ty for making all these helpful videos
wassup man. im really glad i found youre channel. im after buying one of this quads in rough shape for a project. and thatnks to you im learning a lot about them. thanks so much man
Thanks sir for making this video. You helped me tremendously.
Thanks very much for the video. I adjusted my quadrunner 250 and no more valve noises 🙂👍
Awesome man! I am glad it helped!
your King Quad videos have been invaluable. Thank you from Wyoming!!!
Hey ken! Glad i can help. Especially Wyoming. Would love to get there someday. Josh
@@Schneids15 let me know if you come this way. Be glad to show you around. Question. Some people have been swapping out their petcock out with a yamaha petcock to get away from the diaphram. do you think this would work?
That would be great! I should have you shoot me an email. My email is in the about section of youtube. You could swap the petcock but honestly i just plug off the vacuum line at the carb and the petcock and use reserve or on and have never had an issue.
@@Schneids15 yes i have done that, cleaned the carb, checked the petcock, but it will only run good on prime. otherwise it dies after a few seconds and is hard to start.
Thanks for this vid! I got 2 quadrunner, and your videos alway help!
I use a compression gauge tube and add a balloon so you can find top on the compression. Way easier to figure it out.
Keep up the King Quad Videos.
That’s a good idea. I like watching it by myself with a light because i can see exactly when i am at overlap. Of course way easier to do off camera. Lol
Great just what I needed thank you
Nice work just got one for $350 it probably need this to
Ty for the video 👍
Man mine is being a pain starts one time doesnt start another time.. did a carb rebuild on it now it's like almost wants to start but doesn't so fires but just not enough to start almost like flooding.... I give up any ideas?? Could it be value clearance for hard starting?? Thanks in advance
hi! I got a question about my quadrunner 300 1992. The front diff is making weird clicking noise sometime when I turn or push the 4 wheeler when its off. Even if the 4x4 is not engaged. I wonder what can cause that? bad oil? borken gear or something else? The 4x4 still work, but the diff lock i'm not shure.
Are you sure it is coming from the diff? I would be looking at a CV Joint
@@Schneids15 oh yeah, probably à cv joint, one of them got à cv boot broken since I dont know when. Thanks!
@@Schneids15 are cv joint rebuildable? Or I need to change everything?
You can rebuild them i think.... i have only replaced boots.
Thanks again🙏
Question can it stops my four wheeler for bogging out when I'm in like 4 or 3 gear
Thanks for vid. Nice info
You think both being out of tolerance would cause a lack of power i have alot of trouble keeping speed on hills
Thank you that helped me out
Great as usual. Love the videos about the kingquad 300. Just aquired a 2000 Kingquad 300 with only 1928 KLM on it but seems like it is stuck in gear because I can't shift any of the levers. Any ideas. Thanks.
Did you push down on the lever? There is a detent that requires you to push before shifting.
@@Schneids15 Yes I pushed down on the lever but still no movement.
how do you see in there to adjust the front valve, I cant get my head in there to see it?
i like video on setting valves
what would make exhaust glow red when you hold high idle?
Extremely lean condition.
i have a poping noise when i give throttle is that valves or carb isue
If run without intake on it will run lean and cause a popping.
My quad is hard to start when cold i put choke start shut off like 5 sec after when give throttle die too and after like 1 min finish take gaz and run when hot start easy and run great
Basically the first "repair" i did on mine was to replace the old cap o-rings.
Hey, what is a valve clearance on king quad 300 99??
Not sure off hand. I do say it in the video though.0
But mine is 99 model. I think its different
Need help hooking up fuel system on LT185 SUZUKI
An easier way is to stick your finger over the hole. When valves are both closed, the piston pressure will "pop" your finger off of the hole. If you have a buddy you don't really care for you can put the spark plug against the back of his hand to verify, hahaha
Why didn’t you tighten is 10 mm 12 m millimeter bolt
Has anyone had their king quad have a very hard start,I mean like starter wines for a bit then will turn over,some times it will turn over a few times but very hard.replaced starter same thing,pull plug turns over fast put finger over plug hole and stops turning over,I’m lost
Sounds like your starter clutch is failing. Same thing happened to mine. The one way bearing your starter spins fails and causes this.
thanks eh! now i know i did do it right...
Mine is quite cold noisy hot
Or you can buy the proper feeler gauges