facts but when you think in your head you the best it shows in actions 🤦♂ im really thinking about ever getting anything fanatec again as much as i love my wheel in fact i been modding my g920 having a fanatec 😂 stay blessed bro if you sim or drift get at me would like to ask a few thing i not new but new 😂
5:00 did you not replace the metal ring with the plastic one? It saves you pins when you are putting on the wheel to the base since it is tapered and can go in crooked without that spacer
Been watching your videos for a long time and just realized I'm not subscribed. Sorry about that problem fixed! You and Boosted Media are my go to driving sim youtubers. Keep up the great videos! Always learn a lot!
5:00 - looks like you did not follow the installation instructions. The metal washer used with QR1 must be replaced with the plastic washer included with QR2 wheel-side.
For that shot, I quickly attached the QR on several rims to film with the white background and as such, didn’t bother to change out the washers and bolts. Dumb oversight on my end but in actual use, I did make sure to use the correct washer and bolts 👍
It’s crazy that Moza uses a 35 dollar quick release mechanism that’s seamless. I’m good on fanatec and their pricing model with the bs qr2 and boost kit
would qr2 lite limit the torque on a cs dd(+) base. and if not would it be limited if u use for example csl grade wheel like mclaren gt3 with normal qr2 on cs dd(+)? its really messy now trying to understand fanatec rn
0:01 & 04:59 Why are you using the metal washer and the old screws on that wheel instead of replacing them with the new plastic washer and smaller screws which come with the QR2 like you seem to have done on other wheels correctly? By using the old stuff you damage the Base-Side QR2 everytime you attach the wheel and this damage is not covered by warranty...
Currently all my quick releases are un-attached from my rims since I’m swapping them out for filming. For that shot I just placed it on there for filming with the white background (not racing) and as such, didn’t bother to change the washers and screws. Dumb oversight on my end but figured it didn’t matter for just getting b-roll footage :/
I've had a csl dd for like 2 years, and it has broken. I was planning to get a new one with the great deal going on now, but having to spend $150+ to use QR2 turned me off of it. Now I'm thinking about getting the new CS DD and the csl elite v2 petals
@@johnzome788 all of a sudden the ffb cut back to like 30% of what it was. I have the 8nm and now it feels weaker than a g29. I've tried everything software wise, even set it up on a new PC, but it is still weak.
You mentioned the QR2 base side is made from carbon infused plastic. I thought both options of the QR2 (base side) were metal with one being a full cnc piece (pro) and the other being cast. Am I mixed up here?
Question to you, do you notice FFB or any other details changes between your QR1 and QR2, now some weeks in use? I have to install mine yet on my DD Pro
@@Daz5Dazthe qr1 lite is absolute dog though so that’s not surprising, mine used to bend and slide off of my wheel base shaft, instantly went and purchased the qr1.
@@goldsnafu QR1 lite is a bit shit yes, just in a different way to the standard QR1. The problem with the metal QR1 is that it could not cope at all with manufacturing tolerance issues - some people had a rock solid QR1 and others had a sloppy, knocking, mess. QR1 Lite was at least good in an "average" sense for the price. QR2 solves all of this of course.
funny when you see they hold the ar lever back to fit the wheel. there a reason for the tapped shaft it so you have to pull the lever to fit the wheel.
My first CSL DD 8Nm burned itself after 2 weeks. I received the RMA'd product (new wheelbase) yesterday and tested it today for 2 hours. Suddenly it disconnected mid-race and after checking the wheelbase, the usb-connector in the QR1 base-side had bent and destroyed. What the fuck is going on. I hope QR2 fixes this. It's my only option next to a full-refund.
Just get the chinese qr2 wheel side. They are literally the same quality and fitment. 0 issues with 150$ less in cost. I personally have 2 of them. Your welcome.
I was hyped for the QR2, but when i saw their pricing i just went nope. Their qr1 is hot garbage compared to competition, has plenty of issues, and should have been discountinued as soon as qr2 released.
@@johnathanmoyer2375no one should be content with the QR1 and that is OPs point. It should’ve became the standard that QR1 said it was. No one should have a QR that can shorten the lifespan of the main product
I can‘t recommend the qr2 lite. It started creaking extremely loud out of the box. Went away when I bought the metal QR2 (from aliexpress). Fanatec will never see a penny from me
I gave up on Fanatec when they went bankrupt and went Moza. That wheel base runs better to me than anything fanatec has and its options are much better to me
QR2 is not an upgrade and will not improve your sim driving performance. Actually is just a new way of wheel/base contact and frankly, will prove to be inferior to QR1 in the long run.
My QR1 has play between the base side and the wheel side. As tight as it gets, the machine tolerances leave 1/32" to 1/16" of play. When the torque is quickly bouncing left to right I can feel it plain and obvious. Feels cheap and shitty. Maybe you got one that turned out tighter. Maybe you just don't pick up on the sensation. But a lot of us have shitty QR1s and it is due to the system design. QR2 uses slope and wedge shapes that automatically pull dead tight. You may personally be happy with your QR1, but QR2 is factually an upgrade. It's obvious in the design. Shouldn't be an upgrade purchase, though. Should be a free recall item, as their original design was faulty. Consumers don't seem to hold companies accountable these days, though, so here we are having to drop $200 to make the product how it should've been out the box.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You don’t need to pull the collar when attaching the wheel. Just line it up and push it in.
Only need to pull when releasing the wheel.
Fanatec really should throw in a QR2 wheel side or at least a 50% discount with the purchase of a wheel base and a wheel.
facts but when you think in your head you the best it shows in actions 🤦♂ im really thinking about ever getting anything fanatec again as much as i love my wheel in fact i been modding my g920 having a fanatec 😂 stay blessed bro if you sim or drift get at me would like to ask a few thing i not new but new 😂
5:00 did you not replace the metal ring with the plastic one? It saves you pins when you are putting on the wheel to the base since it is tapered and can go in crooked without that spacer
Been watching your videos for a long time and just realized I'm not subscribed. Sorry about that problem fixed! You and Boosted Media are my go to driving sim youtubers. Keep up the great videos! Always learn a lot!
5:00 - looks like you did not follow the installation instructions. The metal washer used with QR1 must be replaced with the plastic washer included with QR2 wheel-side.
For that shot, I quickly attached the QR on several rims to film with the white background and as such, didn’t bother to change out the washers and bolts.
Dumb oversight on my end but in actual use, I did make sure to use the correct washer and bolts 👍
@@OCRacing great to hear!
It’s crazy that Moza uses a 35 dollar quick release mechanism that’s seamless. I’m good on fanatec and their pricing model with the bs qr2 and boost kit
Enjoy the overheating and cheap built quality on ur moza then 🤷🏻♂️😂 why are you here if you are D riding Moza anyway
Wow a year later!!!🥴🥴🥴 you sound like a snowlfake
@@John-Wack_DKHoly hell how is complaining about a $140 QR system being too expensive dickriding? Projection?
You do not have to pull back the quick release to attach it. You can just push it on
True. Pulling it back will reduce scratches I'd imagine.
Yup, it’s just a habit of mine haha
@@Daz5Daz Didn´t think of that. Might be smart to do so for scratches
2:22 those random outdated memes you put in while speaking in a serious manner always cracks me up lol
It’s just my terrible sense of humor 😭🤣
Nice vid man keep up the good work
Thank you, will do :)
What about the base side for the “new” (whenever they decide to start shipping them) clubsport DD.
For this they should have included option to have shaft extension so people can mount monitor between wheel and base for fov
It's coming. They showed it off at sim racing expo.
isnt it already long enough ?
would qr2 lite limit the torque on a cs dd(+) base. and if not would it be limited if u use for example csl grade wheel like mclaren gt3 with normal qr2 on cs dd(+)?
its really messy now trying to understand fanatec rn
0:01 & 04:59 Why are you using the metal washer and the old screws on that wheel instead of replacing them with the new plastic washer and smaller screws which come with the QR2 like you seem to have done on other wheels correctly?
By using the old stuff you damage the Base-Side QR2 everytime you attach the wheel and this damage is not covered by warranty...
because you wouldn't want someone who is reviewing products to actually read the manual right? Also probably blaming the company when it breaks
Currently all my quick releases are un-attached from my rims since I’m swapping them out for filming.
For that shot I just placed it on there for filming with the white background (not racing) and as such, didn’t bother to change the washers and screws.
Dumb oversight on my end but figured it didn’t matter for just getting b-roll footage :/
I've had a csl dd for like 2 years, and it has broken. I was planning to get a new one with the great deal going on now, but having to spend $150+ to use QR2 turned me off of it. Now I'm thinking about getting the new CS DD and the csl elite v2 petals
What broke?
@@johnzome788 all of a sudden the ffb cut back to like 30% of what it was. I have the 8nm and now it feels weaker than a g29. I've tried everything software wise, even set it up on a new PC, but it is still weak.
Hmm super weird… I’ve heard great things about the new Fanatec 12 and 15nm versions coming out, I’ll try to review those
@@samhill88 Im about to get my first wheel, the 5nm bundle, and hopping it works for more than two years.
@@OCRacing I would love to see that
The best thing in years!
Why You hold it though? I mean, while puting it back on the base, thats like the most important difference in usability betwen QR1 and QR2.
You mentioned the QR2 base side is made from carbon infused plastic. I thought both options of the QR2 (base side) were metal with one being a full cnc piece (pro) and the other being cast. Am I mixed up here?
QR2 Lite is glass reinforced plastic. Just installed one, seems solid enough but we'll see how she goes shortly.
Question to you, do you notice FFB or any other details changes between your QR1 and QR2, now some weeks in use? I have to install mine yet on my DD Pro
I went from QR1 lite to QR2 standard and can confirm that it definitely does make the wheel feel more lively overall. It's a superb upgrade.
@@Daz5Dazthe qr1 lite is absolute dog though so that’s not surprising, mine used to bend and slide off of my wheel base shaft, instantly went and purchased the qr1.
@@goldsnafu QR1 lite is a bit shit yes, just in a different way to the standard QR1. The problem with the metal QR1 is that it could not cope at all with manufacturing tolerance issues - some people had a rock solid QR1 and others had a sloppy, knocking, mess. QR1 Lite was at least good in an "average" sense for the price.
QR2 solves all of this of course.
funny when you see they hold the ar lever back to fit the wheel. there a reason for the tapped shaft it so you have to pull the lever to fit the wheel.
Hey OC, quick question:
Any plans on reviewing the Playseat Trophy?
Hmmm... probably not as I'm running out of space from so many cockpit reviews lol
@@OCRacing ah I see makes sense thanks
@@OCRacingsell the ones you don't want to keep and you'll have more space.
Saldra el pack csl dd pro con qr2 directamente o siempre habra que comprarlo aparte?
Oc racing posted big W
Rare Tuesday upload 👀
thanks simube for these!
Sick Video as always
Sick comment as always
The qr2 pro is not well mounted you could damage you pins
My first CSL DD 8Nm burned itself after 2 weeks. I received the RMA'd product (new wheelbase) yesterday and tested it today for 2 hours. Suddenly it disconnected mid-race and after checking the wheelbase, the usb-connector in the QR1 base-side had bent and destroyed. What the fuck is going on.
I hope QR2 fixes this. It's my only option next to a full-refund.
Good video
how to put a QR2 on a aftermarket wheel?
You didn't align the clamp even close to how it should be and you forgot to switch the metal thin ring with the new thicker plastic ring on your wheel
OC in love your content! What is a wheel I should get next I currently have a g920
Thanks! Depends on your budget. Usually Moza or Fanatec is a great upgrade from the beginner Logitech wheels
@@OCRacing thanks homi have a good one
Moza R5 bundle (pc only) or Moza R3 (xbox and pc). Still waiting for R3 to go retail.
Greetings 👍
Hello 👋 how are the gloves doing?
@@OCRacing Like them and using them!! Thanks! Hope you had a great time in Amsterdam!?
Just get the chinese qr2 wheel side. They are literally the same quality and fitment. 0 issues with 150$ less in cost. I personally have 2 of them. Your welcome.
I have six rims, I'm kidding can you imagine. Have a good Halloween you scary guy.😄🙋👍
🤣 happy Halloween :)
TLDR: It's the second edition of their quick release system, hence the name qr2 and its better, than qr1.
I was hyped for the QR2, but when i saw their pricing i just went nope. Their qr1 is hot garbage compared to competition, has plenty of issues, and should have been discountinued as soon as qr2 released.
So everyone who was content with the QR1 or used a CSL Elite or CSW base wouldn't be able to buy any more fanatec wheels ever?
@@johnathanmoyer2375no one should be content with the QR1 and that is OPs point. It should’ve became the standard that QR1 said it was. No one should have a QR that can shorten the lifespan of the main product
QR2 PRO STILL has clicking during quick direction changes and slow chicanes 😦 Do NOT buy a lite!
LOL "This is the QR2" - 0:02 - Instantly shows it improperly installed.
I can‘t recommend the qr2 lite. It started creaking extremely loud out of the box. Went away when I bought the metal QR2 (from aliexpress). Fanatec will never see a penny from me
👌🏻👌🏻
👍
interesting, but I don't think it's worth the upgrade, I don't see any benefit here, it's just a catch system nothing more
You never used a bad QR1 if you say that.
I gave up on Fanatec when they went bankrupt and went Moza. That wheel base runs better to me than anything fanatec has and its options are much better to me
🤔🤔🤔
It has pins... Nuff said.
QR2 is not an upgrade and will not improve your sim driving performance.
Actually is just a new way of wheel/base contact and frankly, will prove to be inferior to QR1 in the long run.
How do you figure? I got mine installed and it stopped the metallic clicking sound I was getting with the QR1.
My QR1 has play between the base side and the wheel side. As tight as it gets, the machine tolerances leave 1/32" to 1/16" of play. When the torque is quickly bouncing left to right I can feel it plain and obvious. Feels cheap and shitty. Maybe you got one that turned out tighter. Maybe you just don't pick up on the sensation. But a lot of us have shitty QR1s and it is due to the system design. QR2 uses slope and wedge shapes that automatically pull dead tight. You may personally be happy with your QR1, but QR2 is factually an upgrade. It's obvious in the design. Shouldn't be an upgrade purchase, though. Should be a free recall item, as their original design was faulty. Consumers don't seem to hold companies accountable these days, though, so here we are having to drop $200 to make the product how it should've been out the box.
first
Legend 🫡
@@OCRacing
third
Third is not good enough unfortunately 😬