How To Install A 60 Amp AC Disconnect
Вставка
- Опубліковано 2 жов 2024
- My AC condensing unit has never had a power disconnect, so in this video I show installing a new AC disconnect from beginning to end.
**DISCLAIMER: Some links in this description may be affiliate links. If you buy any of these products using these links I'll receive a small commission at no added cost to you. All links are to products that I actually use or recommend. Thank you in advance for your support!
Tools & Items Used In This Video:
PVC Cutter: amzn.to/3Idjpcg
Quick Dry PVC Glue: amzn.to/3uKpkTc
Tapcons: amzn.to/49vwrOy
Disconnect Box: amzn.to/4bRSekK
Fluke Tool Bag: amzn.to/49tBkaz
Sealproof 6' Whip: amzn.to/3UWyq9Z
Knipex Pliers: amzn.to/3uDQJGq
Gorilla Grip Kneeling Pad: amzn.to/3SK3rLG
Klein 7n1 nut driver: amzn.to/3uDoQ1d
Magnetic Parts Tray: amzn.to/3US7k3W
Klein Lineman & Crimping Pliers: amzn.to/3OTyraM
Klein Screwdriver Set: amzn.to/3OXii4b
Klein Wire Cutter, Stripper, Crimper Tool: amzn.to/3Tb2hdx
Fluke 902 FC HVAC True-RMS Clamp Meter: amzn.to/3SVa5ia
Big Rock - Take the Lead by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
Perhaps it's me, but I didn't think one was supposed to run romex in PVC, THHN only?
I addressed that very thing in the video. I said that it is against code to use Romex outside, even in conduit. It has been that way for many many years. It requires wire rated for outside such as UF-B cable and it has been swapped out to the correct cable since this video was released.
Yes, he addressed that early at 4:15 and again at 16:20, said he was going to have to put a junction box in the attic and run the correct UFB cable from there down to the disconnect, but it was "a job for another day."
Great video Rus! I'm excited about the new channel and I'm sure that I'll have a couple requests for you in the near future!
Thank you Greg! It feels good getting my hands dirty again! This channel may just whip me back in shape haha 😂 Heck yeah, send those requests!
Excellent work Rus!
Thanks Luis!
Enjoyed the video.
Awesome, thank you!
Great job Rus!!! I got some projects waiting for you when you come up here in July!!!!!! hahaha
Thanks Jeff! Should I bring my tools? Haha 😂
nice job rus.
Thanks Scotty!
Great first video. You definitely have the years of experience and knowledge for a how to videos on many DIY projects and job related work. Look forward to seeing and learning more.
Thanks Derek! You would know first hand son!
What were those fake cats on the lawn🤣🤣🤣🤣Rus, I'm a handy fella, matter of fact i can fix just about anything if I want. That said. You just taught me something. Nice job man. Looking forward to more learning!!
My wife's cats are very much alive lol! Thanks for watching Tommy, I appreciate it!
Was wondering how long can you run liquid tight clipped at 18" - 36" intervals along the exterior of a building?
I learned something new today... Great Video, Rus!
Awesome! Thank you!
Nice job, Rus! Great work! Really enjoyed watching you show your other skills. I hear you can cook pretty well too lol.
Thanks Mike! I appreciate you watching the very first video! Yeah I’ve been known to cook a thing or two haha 😂
He is good. watched a many of his videos.@@SkillSavvyDIY
Does code still require a disconnect if ac is installed within 6' of the breaker panel? I was under the impression that it isn't required. I ran 10-2 UF in conduit straight from my breaker to the unit. Thanks
The code states that a disconnect must be in sight from the condensing unit and readily accessible. Mine was neither of these but it is now.
@SkillSavvyDIY ok thanks. My breaker is within line of sight.
This is an awesome video brother ❤
Thank you Sapo!
Great informative video Rus.. how many time did you say Smoky Ribs BBQ on exit?
Thanks I appreciate you watching! LOL, believe it or not, not once and that is surprising LOL
Very informative and helpful video Rus! . This will definitely be a awesome channel! Cheers brother 🍻
Thanks and I appreciate you checking out the very first video!
Great video to kick things off! I definitely learned a few things.
Great to hear!
Great first video for your new series, cousin! You could actually show your lunch break in each show and give a plug for your other channel, too! You speak with authority and years of sage experience. Good luck with this new venture!
Thank you Steven! Yeah, plugging this new channel from my older channel is definitely going to happen. Thanks for watching cousin, I appreciate it!
Great new channel Russ!!
@@garytingler3222 Thank you Gary!
Nice job, Rus!👍👍
Thanks Kevin!
This was very interesting!
Cool name for this channel “Kick Ass DIY” 🤓
Hello Rus, great video and well explained except for one thing I don’t understand. You installed a 60 amp disconnect on a unit using a 30 amp breaker. Can you explain that because from what I learned and been told is that a disconnect should be rated no higher than the breaker it is using.
Yes, you absolutely can use a 60 amp disconnect on a circuit as long as the circuit is protected with the proper breaker which is a 30 amp in my case. You can always go bigger but never smaller. My disconnect is not fused, since I have a 30 amp breaker at the panel, but some disconnects do have fuses. If you used a fused 60 amp disconnect, you would have to use 30 amp fuses in it to protect the wiring which is rated at 30 amps. Hope this makes sense to you. Thanks for watching.
Oh okay yes now it makes sense to me. Got it Rus thanks for the info
@@oscargarcia6929 You bet, have a great weekend
Good job bro! Excellent video. 👍
Thanks Randy, I appreciate you watching the very first one! You do know that you were the one that taught me a lot about electrical when you had your electrical contractors license way back when. I remember helping you rough in a few electrical jobs. Good memories brother!
I replaced my fan motor a few days back after they wanted to charge me 575.00 dollars. Four wires is all it had to disconnect and connect plus reverse the direction on the fan.. HVAC guys were ripping me a new one. took me 45 minutes to fix. Thanks for sharing Rus excellent video.
That right there is exactly why I started this channel. There are so many things that most people can easily do themselves to save a lot of money.
Temporary repairs are temporary, unless they work.
Great job Rus.Well explained! Romex strips so much better than UF-B , i hate trying to strip that !
Thanks Kent! Oh for sure, much easier and faster
Its against NEC to use NM cable in conduit outdoors. That paper liner will wick moisture right back inside.
You obviously skipped through the video because I discussed that very thing
@@SkillSavvyDIY yet you still did it??!?
It’s been like that for many many years, so it’s not like I had to jump through hoops to get it changed out that same day, but just so you know it’s been replaced with UF-B just like I said I would do in the video. Have a nice day and thanks for the view. It really helps out!
I cought your FIRST video , you could bet your butt I'm gonna catch them all , like them all , comment on them all, you my friend are gonna get tired of my comments . THANK YOU FRANK FROM MONTANA. PS . I'm gonna tell both my son in laws about this new channel...
Thank you Frank! That is very much appreciated!
Hi my non fused pull out disconnect looks like burn (copper) now do I need to replace the pullout copper or the whole unit thanks
If heat has caused the connections between the copper blades and the busses to swell and loosen then you may want to change out the box with a new one. As long as the circuit is protected with the correct size wire and breaker, then you can upgrade to a higher amp non fusible disconnect. In this video I installed a 60 amp disconnect even though the wire and breaker is rated at 30 amps. Hope this makes sense.
@@SkillSavvyDIY got it thx 🙏
You’re welcome
Great video. Thank you, helped me a lot for installing my mini split ac today.
Glad it helped!
ROMEX IN A CONDUIT?
Yeah, I discussed that in the video
I love how someone used MC cable for the original whip. That stuff is not watertight, nor is it suitable for direct contact with the ground.
Yeah there was a lot of sketchy stuff about this wiring.
Great video Rus
Glad you enjoyed it
he he its different seeing you with a screwdriver in your hand and not a spatula. Great video Rus TY
Haha Lance! I'm glad I didn't reach for the spatula out of habit 😂, thanks Lance, I appreciate you stopping by!
You're so multi-talented Rus! Thanks for the vid! - Looking forward to many more DIY from this channel. - Cheers!
Your welcome Garry and thank you! Cheers!
☑ all tapped in Rus👍🏼
Thanks NBL!
Minty repair
Thanks for watching
SO OLD SL. NICE 😅 TO REMIND THANK YA. KEITH AND DEBORHA M. AND FAMILY IN OHIO...😊😅😅😅😅
At 65 years old, I'm definitely old school. Thanks for watching
Good stuff Rus! Looking forward to all your great tips here.
Thanks for checking the new channel out Zach!
I love anything, DIY! Thanks for sharing, Rus!
You’re welcome and it’s good to hear from you. It’s been awhile
200th like and just subbed, good content sir!
Awesome, thank you!
Почему провода без запаса в коробке оставляете?
А если отгорит провод? А запаса жил нет
@@НиколайНиколаев-й5ц7м What if the wire burns out in the middle? If it did then new wire would have to be ran anyway. If it burned out at the connections then I left enough to take care of that. Our code does not require to use any more wire than needed to make the connections, even though I did use a few extra inches. The breaker is designed to protect the wire and prevent them from ever burning out. If you have made good tight connections and the proper size wire for the circuit then there should never be an issue. Only receptacle boxes require you to leave 6" of wire from where the wire enters the box, and this is not a receptacle box.
Спасибо теперь понял. У нас в России запасы оставляют везде где нужно и не нужно)))@@SkillSavvyDIY
Nice video, just subscribed 👌
Thank you, I appreciate you subscribing!
Love your new channel…
Glad you like it. Much much more to come!
Knee pad check!
NEVER put connectors in mortar joints! They won't hold over time. You saw that when you took the pipe down.
Tapcons dig in very well in comparison to the original wall anchors that were originally used. The box it self was mounted to brick.
You have a good point. I should have watched the whole video before I made my comment. I am like you, I am 60 and have done a little bit of everything as well. There were no Tapcons when I was coming up.@@SkillSavvyDIY I am glad to see your videos. Good luck in your life!
Thank you, I appreciate it!
I’m excited I’m a visual n hands on learner and this is very helpful thanks so much
@@banjobbqllc You're welcome and thanks for watching
woohoooooooooooooo🌷
Hey! Thanks for stopping by my new channel!