I actually putted schrader valve on one of those foamers thinking it’s cheap i want to try it and get another if it breaks. But i was actually able to use it with schrader valve and xiao mi tire inflator. Safety valve is going to act somewhere between 27 to 30 psi so if i set my inflator to 30 psi, it would be keep going unless i turn the inflator off
You know what I love about this channel Phil you and your wife just make stuff work, what ever it is, that little brush on other companies charge 20+ bucks
Very informative thanks 🙏🏽 I bought a foam sprayer because my pressure washer broke and I needed to use something as a quick replacement. Those sprayers a a game changer for me 🎉
WOW! Amazing editing on this one Phil! Cudo’s to you sir! Also, all of those brushes look legit. I’ve seen what look like the exact same brushes under different brand for stupid money in comparison
I’ve ordered a bunch of stuff from temu I’ll write down below my experience. I ordered those weighted straw tubes.On some they work like the sooprinse and also a red and black foam cannon on temu it fit no problem. On my pf22 it did not fit but a small zip tie got it to tighten on. I got a silicone headlamp with a LED strip across the forehead and a flashlight on the side. I love that thing! Super bright great for interiors. I got 2 different spray guns. The simple small guns you typically find on Amazon and it was exactly the same as the ones on Amazon. Also got one that looks like the mckillans and it worked no issues. I didn’t have any leaks and all held pressure and lasted 10+ washes haven’t had any issues yet. Got a tire brush it’s all black and pretty stiff bristles can’t really mess that up. Also got the detail factory curveball dupe and it feels and looks the exact same. I still don’t get the hype with this brush tho I found a 10pk of microfiber applicator pads with a pocket on the back I love these for dressing tires. Got a bucket caddy exactly like the buckanizer. Solid great for wheel tools Grit guard eh it was flimsy and came bent Wide mouth foam cannon. I really like it I also ordered 1.1 orfice for it and it made good foam I got hex polishing pads. Ehh they’ll work but expect a use or 2 out of them Found a microfiber wash pad i love this thing it feels soft and holds a good amount of water Curved Extension want it’s 15in it’ll do the job but definitely prefer the 21in version. But does have a spot to hold nozzles which is cool Microfiber towels 10pk 10x10 they’re good kitchen towels Got a drying towel but it was too thin and shed allot I found a set of black nitrile gloves. I love them perfect for detailing but not so much mechanic work
Another great video Phil , I bought a few things from them as well. Not a bad thing to try different places for options, always appreciate the content.
That drying towel is my daily go 2 towel love that the best!! All other towels I tried gave fallen apart!! I don't buy towels but bottle brushes and large drying bowels and foam cannons are definitely worth the money
Cool video Phil. I got one of those makeup style brushes about a year ago. Don't like it for anything other than water based dressing. I like the options you give as always.
The filters in the foam cannon can be cleaned when they clog and become full. I use some gun solvent for that. Works really well. Let the solvent work for 10-15 minutes then rinse with warm water and they will be like new again. I also have replaceable filters I used but clean works just as well. Type Hoppes NR 9 solvent, a couple of drops of it on the filter then just wait and rinse off. Now I have not used Hoppes itself but Pro-Shot Solvent Copper IV on the filters. Just put the filter in a milliliter measure like that and you'll see when it dissolves all the shampoo and detergent. As well as Acetone works quite well to dissolve agents and shampoo.
You can put the valve on. I have 5 of the same and each has a valve. I purchased the all rubber short valves. They conform to the radius and allow the handle to spin. Great video.
Not at all. Just clean the inside burrs for a tight seal. I drilled about 3/4 inches below the collar. Wanted to put it up on the pump like my IK, but couldn’t find a good place. Since it has a release valve, I fill it till it hisses. 1/3 to 1/2 air gives you a lot of run time.
This is a great video. An “unpacking” video. These would be a great to do as an ongoing video feature. I certainly would enjoy it. Order up some “new” products and unpack the box they arrive in and do demos on the product. Enjoyed this one. Till the next one.
Bro, I am trying to checkout at Temu on an order and it's like an inquisition lol. I got a handful of things that I'm really excited to get. I actually got one of their detail carts. If the clip on parts were a little sturdier it would be the most useful cart I've ever see. You wouldn't believe how much I have hanging and stored on that thing. Just hope the clips are available lol. If so, going to head back to the inquisition and geta ton more lol. Thank you for the video.
Another great video, l got to get the angled head attachment. I can see it being useful when trying to clean the dash at the windshield defrost/vent area, especially in those long low windshields like you get in most sports cars. I’m pretty sure I saw those at Carzilla.
Temu has some nice stuff for detailing and some of the stuff that is on amazon is the same thing on temu but for cheaper 😂 just my own opinion 🤷♂️ Awesome video 👍
The Camaro looks awesome and I love the manual transmission. I am not the best at manual transmissions but they are fun. Temp has so many products for car detailing and I was looking their polisher holders. I need to check order a few and test them out. Thank you for the video!
Use a ziptie for the hose, use pliers to pull it tighter one click Ive bought some drying towels from there they are so good. Not exactly all that cheaper than Amazon though when you look into it though... the prices were literally alright its not crazy cheap.
I like that cannon too, I got it on Amazon to be used as a dedicated LSP cannon for the likes of Polar seal, it’s great value for money but, it’ll never replace my MJJC S V3, they both have their jobs and do an excellent job respectively. I do prefer the IK sprayer type pump handle though as it gives more purchase when pumping it up, I have the 1,5 Ltr and a Spear and Jackson 5 ltr that makes applying the citrus pre wash so much easier. Great video 👍👍
Ive found with their brushes and pump sprayers they are really good. The foam canons are far better than the price you pay. The lights are fantastic, ive torches and they are so cheap ive got all the family one to keep in the car in case it breaks down in the dark. The most useful ligĥt is a small flip arm style with a magnet. Ideal for interiors and small enough to fit into a pocket. Only things ive not liked are some microfiber cloths are poor quality but for the price you dont lose a huge amount
All to funny Phil . I was just surfing around the temu site last night looking at alot of the stuff you got . Glad you did this video b4 i ordered ! Now i feel better about the stuff so time to spend some money . Lol .
awesome video brother👍🏽…i finally tried your tip for adding schrader valves to my pump sprayers. i had actually had some 90 degree valves where you poke em through then lock em down with a nut, it squeezes the gasket together to be air tight. it worked perfectly with the handle clearance on the ik sprayer, i may shoot you some pics via email if i can find it on your website ✌🏽
Hi. Thanks for so most hybrid ceramic spray sealants like this can be applied wet or dry and as a topper on coatings or a stand alone. I never have issues with my towels after using products like this. Towels will loose their absorbency over time anyway, but again just getting the towel a little damp again when drying and the towel will absorb just fine.
Great video,my foam cannon needs parts it's about 7years old number two works great,brushes used speed master just order meguiars all purpose cleaner gallon refill my 5gallon.frank in norridge,ill were I do small detailing over at Iggy's muffler,my church one family owns 6 cars for detailing.
I bought you the hoses, but too big for the MTM foam gun. but cut the original hose, so there was about a cm left, then I threaded the temu hose over it, it works great,
i bought the clear pump sprayer and the pumping mechanism cracked and it didn't hold any pressure I would recommend investing in a good one like an IK or Marolex.
Aw man. That sucks. I have multiple ok and Marilee pumps and they too had pressure seal issues and some broke on me. Unfortunately I don’t really trust any company to have true quality, it’s still a gamble no matter what we get.
Hi. I have the link in the description. But I’ll link it here for you also. Pressure Washer Tip Holder madcarcareproducts.com/products/mad-car-care-universal-nozzle-tip-holder
i have the same black foam bottle. i cant get mine of foam no matter what. It came with little bits of clear plastic which look like they go inside the nozzle but im thinking im missing a part.
@@MirandaDetailing which is why I searched for this video. I was hoping I would come across someone who had the same issue and had guidance on assembling the nozzle. Trivial, I know, but the pieces I have don't make sense.
hey Phil I saw you guys are using ar 630 pressure washer. How’s the machine performing? Planning to get it for my detailing studio here in delhi..India. Btw will soon be Gtechniq accredited, any piece of advice. Just subscribed 😊.
Hi. Yes we love it I had an oil leak out of one of the gaskets but it was an easy fix ua-cam.com/video/zXk9WI-XA-c/v-deo.htmlsi=EBUxhNvDqc_HXDPp Other than that it runs perfectly.
Another Awesome video Phil! Been using Temu for a few years now but never tried there detailing products. Now I will, thanks for the vote of confidence to try them out..
Hi. So it all comes down to what our customers want and can afford. We definitely can apply CSU or Gyeon Infiniti coatings, but we also charge approximately for them. Most of our customers don’t need or want to pay for that. So CSL or the other Gyeon coatings are perfect for them. I do already have of of the C6 coatings, but not sure when I use it. 😎👍🏼
I ordered the same black foamer you used for the prewash, its complete trash. it doesn't hold pressure, once i pull the lever it releases all the pressure. damn temu
Aw that sucks. Sorry to hear that. I have 4 of them now and they all work fine. But who knows, sometimes you get crap. I have had expensive ones from Bigbio crap out the day i get them, two of them in fact. So even expensive, supposedly good quality tools are crap also.
the brush with an angle i have one and this case the holes of the wheels are large enough and its easy to go around the wheel barrel and you did a camaro I work so fair I know for a school for students who has problems at school and want to learn to be a car mechanic also restoration classic cars he has or had a red Alfa Romeo 3 doors 164 I think and took it to the automatic car wash 2 metal poles clear coat problems and wheels look awful I wash cars .and sometimes you as third party have to use what you getand could be very very simple
Phil! I spy some Jimbo's products. How do you like them? I wasn't a fan of how bad he trashed cerakote but definitely curious if his stuff is any good. What are your thoughts?
@kmt_alen8373 I didn’t need to refill the chemical at all. I fact I was able to use it on 3 different vehicles. But as you may have seen in the video I would pump it up after about 2 panels or so. It’s very easy to hand pump it while using it.
I didn’t have to refill it at all with chemical. In fact I got about 3 vehicles out of this one fill. But as you may have seen I would hand pump it after a few panels. It’s very easy to hand pump on the fly.
I bought Some wheels to replace those office chair wheels they are roller blade wheels. Best for anything they work for. I got them off Amazon. But if you need to upgrade those wheels you will like them.
Wow! You and wifey have lost some weight! You guys are looking great since I last saw y'all! Why the beard? Gonna miss that young and boyishly good looks now! 😂 I have the Temu cannon and spray bottle, the one with the more brittle plastic that you can't put a Schrader valve on, and I must say, the foam cannon is pretty good! I still prefer the Griots Boss or MJJC cannons, but that guy surprised me, and I do use the measuring cup a lot! The foam sprayer, not so much on it, its lost its umph for me already. Hopefully you have better results. I should check out the other one you have. I'll be checking out your videos again, now that life is settling down here a little.
I like watching you open new stuff. Fun. Also gives me ideas. I bet the owner of the Camaro freaks out when they wash the car and the water and soap beads and sheets off. I know i do. Now take the new portable table you just got and bring it in the house and push it down to the bedroom and serve Jess breakfast in bed. See.....multiple uses. Lol. Fun video Phil, hi wife!
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I actually putted schrader valve on one of those foamers thinking it’s cheap i want to try it and get another if it breaks. But i was actually able to use it with schrader valve and xiao mi tire inflator. Safety valve is going to act somewhere between 27 to 30 psi so if i set my inflator to 30 psi, it would be keep going unless i turn the inflator off
You know what I love about this channel Phil you and your wife just make stuff work, what ever it is, that little brush on other companies charge 20+ bucks
Thanks so much!!
Very informative thanks 🙏🏽 I bought a foam sprayer because my pressure washer broke and I needed to use something as a quick replacement. Those sprayers a a game changer for me 🎉
After I'm done with my foam cannon I usually turn it so only water comes out cleaning it
Good tip! That’s good if you’re using it once every 2-3 weeks.
Best thing to do with any pump sprayer is just relieve the pressure and she's swoit
Hey Phil !!! Always fun to open detail packages... Keep your videos going !!!
Thanks! Will do!
WOW! Amazing editing on this one Phil! Cudo’s to you sir! Also, all of those brushes look legit. I’ve seen what look like the exact same brushes under different brand for stupid money in comparison
Thanks man.
Great review on the products. Pretty cool brushes.
Thanks!
I’ve ordered a bunch of stuff from temu I’ll write down below my experience.
I ordered those weighted straw tubes.On some they work like the sooprinse and also a red and black foam cannon on temu it fit no problem. On my pf22 it did not fit but a small zip tie got it to tighten on.
I got a silicone headlamp with a LED strip across the forehead and a flashlight on the side. I love that thing! Super bright great for interiors.
I got 2 different spray guns. The simple small guns you typically find on Amazon and it was exactly the same as the ones on Amazon. Also got one that looks like the mckillans and it worked no issues. I didn’t have any leaks and all held pressure and lasted 10+ washes haven’t had any issues yet.
Got a tire brush it’s all black and pretty stiff bristles can’t really mess that up.
Also got the detail factory curveball dupe and it feels and looks the exact same. I still don’t get the hype with this brush tho
I found a 10pk of microfiber applicator pads with a pocket on the back I love these for dressing tires.
Got a bucket caddy exactly like the buckanizer. Solid great for wheel tools
Grit guard eh it was flimsy and came bent
Wide mouth foam cannon. I really like it I also ordered 1.1 orfice for it and it made good foam
I got hex polishing pads. Ehh they’ll work but expect a use or 2 out of them
Found a microfiber wash pad i love this thing it feels soft and holds a good amount of water
Curved Extension want it’s 15in it’ll do the job but definitely prefer the 21in version. But does have a spot to hold nozzles which is cool
Microfiber towels 10pk 10x10 they’re good kitchen towels
Got a drying towel but it was too thin and shed allot
I found a set of black nitrile gloves. I love them perfect for detailing but not so much mechanic work
Nice! Thanks for sharing
I like seeing a variety of detailing tools, I really appreciate you and Mrs Phil, thanks and happy Easter 👍😁
Thanks 👍
That little black brush for applying dressings or coatings to tires is brilliant. Used mine today. Fabulous tool.
The cart looks pretty solid. Great video!
Totally! Thanks!
Another great video Phil , I bought a few things from them as well. Not a bad thing to try different places for options, always appreciate the content.
Imo that dryn towel looks like the best out of that pkg.def looks like a solid towel
That drying towel is my daily go 2 towel love that the best!! All other towels I tried gave fallen apart!! I don't buy towels but bottle brushes and large drying bowels and foam cannons are definitely worth the money
That coating looks fantastic….
Cool video Phil. I got one of those makeup style brushes about a year ago. Don't like it for anything other than water based dressing. I like the options you give as always.
The filters in the foam cannon can be cleaned when they clog and become full.
I use some gun solvent for that.
Works really well.
Let the solvent work for 10-15 minutes then rinse with warm water and they will be like new again.
I also have replaceable filters I used but clean works just as well.
Type Hoppes NR 9 solvent, a couple of drops of it on the filter then just wait and rinse off.
Now I have not used Hoppes itself but Pro-Shot Solvent Copper IV on the filters.
Just put the filter in a milliliter measure like that and you'll see when it dissolves all the shampoo and detergent.
As well as Acetone works quite well to dissolve agents and shampoo.
Cool. Thanks for the tip!
Welcome back to UA-cam !!
Nice work light & the blue brushes, big microfibre & like the cart. Really looking forward to the spray bottles to see how they perform
Thanks!
I bought the foaming pump sprayer last month from Temu and it’s been great so far for applying wheel cleaner 🥳
Awesome!
Aquagloss and a air paint gun from harbor freight for tire dressing from superior products
You can put the valve on. I have 5 of the same and each has a valve. I purchased the all rubber short valves. They conform to the radius and allow the handle to spin. Great video.
Oh cool! No issues drilling on that type of plastic?
Not at all. Just clean the inside burrs for a tight seal. I drilled about 3/4 inches below the collar. Wanted to put it up on the pump like my IK, but couldn’t find a good place. Since it has a release valve, I fill it till it hisses. 1/3 to 1/2 air gives you a lot of run time.
That’s awesome! Thanks for sharing that! I will definitely do that to these bottles.
Thanks Phil for another great video.
You are very welcome
Thanks, for the video Phil. I have never ordered anything from Temu.
This is a great video. An “unpacking” video. These would be a great to do as an ongoing video feature. I certainly would enjoy it. Order up some “new” products and unpack the box they arrive in and do demos on the product. Enjoyed this one. Till the next one.
Cool! I’m glad some people like this. Thanks.
Bro, I am trying to checkout at Temu on an order and it's like an inquisition lol. I got a handful of things that I'm really excited to get. I actually got one of their detail carts. If the clip on parts were a little sturdier it would be the most useful cart I've ever see. You wouldn't believe how much I have hanging and stored on that thing. Just hope the clips are available lol. If so, going to head back to the inquisition and geta ton more lol. Thank you for the video.
🤣😎👍🏼. You’re welcome.
Another great video, l got to get the angled head attachment. I can see it being useful when trying to clean the dash at the windshield defrost/vent area, especially in those long low windshields like you get in most sports cars. I’m pretty sure I saw those at Carzilla.
That's some excellent products there. Camaro looks awesome!! 👌 🇨🇦
Thanks.
I purchased some stuff recently, was pleasantly surprised, they sell some garbage but some good items too....thx again for great content @phil
Thanks
Such a nice colour on that Camaro.
Temu has some nice stuff for detailing and some of the stuff that is on amazon is the same thing on temu but for cheaper 😂 just my own opinion 🤷♂️ Awesome video 👍
Awesome video very nice job. I got to get some soft brushes. Love the Camaro! Just seeing the water beads and shine you know its ceramic coated.
Thanks!😎👍🏼
The Camaro looks awesome and I love the manual transmission. I am not the best at manual transmissions but they are fun. Temp has so many products for car detailing and I was looking their polisher holders. I need to check order a few and test them out. Thank you for the video!
Thanks 👍
That’s a really nice looking Camaro, cleaned up great
Thanks!
Hi all whats the best leather cleaning product for my seats and the best way to clean the embroidery without damaging it??? thanks
Hi. We love the Meguiar’s leather cleaner
bit.ly/3XmuHUy
And this is awesome for any fabric
bit.ly/3JQh3Bk
What first wheel brush was that you used on the barrels with the bend
Hi. It’s this amzn.to/3R6xWeO
Awesome take on that pkg.
Use a ziptie for the hose, use pliers to pull it tighter one click
Ive bought some drying towels from there they are so good. Not exactly all that cheaper than Amazon though when you look into it though... the prices were literally alright its not crazy cheap.
Thanks!
Thanks for sharing this review.
Amazing video, keep up the good work man! Btw was the drying towel worth it for you?
Thanks. Oh yeah. We still use it all the time.
I like that cannon too, I got it on Amazon to be used as a dedicated LSP cannon for the likes of Polar seal, it’s great value for money but, it’ll never replace my MJJC S V3, they both have their jobs and do an excellent job respectively. I do prefer the IK sprayer type pump handle though as it gives more purchase when pumping it up, I have the 1,5 Ltr and a Spear and Jackson 5 ltr that makes applying the citrus pre wash so much easier. Great video 👍👍
Thanks for sharing! 😎👍🏼
Hi were did you get your equipment from and how much thank you?
Hi. You mean the tools from Temu?
@@MirandaDetailing yes ,exactly thank you brother
Great video! I’m curious where you got that nozzle holder for the spray gun? Keep up the great work!
Hi. It’s this madcarcareproducts.com/products/mad-car-care-universal-nozzle-tip-holder
Ive found with their brushes and pump sprayers they are really good. The foam canons are far better than the price you pay. The lights are fantastic, ive torches and they are so cheap ive got all the family one to keep in the car in case it breaks down in the dark. The most useful ligĥt is a small flip arm style with a magnet. Ideal for interiors and small enough to fit into a pocket. Only things ive not liked are some microfiber cloths are poor quality but for the price you dont lose a huge amount
All to funny Phil . I was just surfing around the temu site last night looking at alot of the stuff you got . Glad you did this video b4 i ordered ! Now i feel better about the stuff so time to spend some money . Lol .
Glad you enjoyed it
Heat the straws up to shrink on the foam cannon. I dig the jacket would like to get one.
The pump sprayers leak overtime. Well mine did.
I’ll have to try heating them up and see if they shrink or just melt 🤣
awesome video brother👍🏽…i finally tried your tip for adding schrader valves to my pump sprayers. i had actually had some 90 degree valves where you poke em through then lock em down with a nut, it squeezes the gasket together to be air tight. it worked perfectly with the handle clearance on the ik sprayer, i may shoot you some pics via email if i can find it on your website ✌🏽
Awesome! Thanks
Hello. Great video. I noticed you're using a lsp like a drying aid, Does doing this ruin how well the towel absorbs over time?
Hi. Thanks for so most hybrid ceramic spray sealants like this can be applied wet or dry and as a topper on coatings or a stand alone. I never have issues with my towels after using products like this. Towels will loose their absorbency over time anyway, but again just getting the towel a little damp again when drying and the towel will absorb just fine.
Cool sunglasses for you 👍🏼👍🏼
For those foam cannon straws, maybe someone could print up an adapter to fit those hoses you just bought.
Btw as always awesome content!
That’s a great idea!! 😎👍🏼
I wondered about that stuff. Thanks for the review!
You’re welcome.
Hi, what tip were you using at 14:30 with the handheld?
Hi. You mean this? bit.ly/3Q4Vj7P
@@MirandaDetailing actually, I figured it out. Thanks !
Great video,my foam cannon needs parts it's about 7years old number two works great,brushes used speed master just order meguiars all purpose cleaner gallon refill my 5gallon.frank in norridge,ill were I do small detailing over at Iggy's muffler,my church one family owns 6 cars for detailing.
I bought you the hoses, but too big for the MTM foam gun. but cut the original hose, so there was about a cm left, then I threaded the temu hose over it, it works great,
Great tip!! Thanks!
I have the foamer from Temu. It works nice. Nice vid!
Cool, thanks!
Awesome car! And great tools for detailing
Thanks! 👍
A lot of good stuff there! 👍🏻👍🏻
Thanks man
Awesome video and content good friend
What do you use for prewash? Thanks
Hi. It depends on the service we’re doing. Usually an apc like Super Clean 1:10.
For coatings I usually Koch Chemie super foam or active foam.
@@MirandaDetailing Thank you
Great job guys...
Thanks
i bought the clear pump sprayer and the pumping mechanism cracked and it didn't hold any pressure
I would recommend investing in a good one like an IK or Marolex.
Aw man. That sucks. I have multiple ok and Marilee pumps and they too had pressure seal issues and some broke on me. Unfortunately I don’t really trust any company to have true quality, it’s still a gamble no matter what we get.
Wondering where you got a hold of that tip holder thats on your pressure washer gun ?
Hi. I have the link in the description. But I’ll link it here for you also.
Pressure Washer Tip Holder madcarcareproducts.com/products/mad-car-care-universal-nozzle-tip-holder
Thinking it's not 'team-o' but Tem-U as in tempt-you. Clearly they did....class vid as usual.
i have the same black foam bottle. i cant get mine of foam no matter what. It came with little bits of clear plastic which look like they go inside the nozzle but im thinking im missing a part.
Oh thats weird. sometimes pieces are missing on some things.
@@MirandaDetailing which is why I searched for this video. I was hoping I would come across someone who had the same issue and had guidance on assembling the nozzle. Trivial, I know, but the pieces I have don't make sense.
Where did you get that Pure:est foam canon?
Hi. www.carsupplieswarehouse.com/products/pure-est-foam-canon-adapter-kit-for-pressure-washers?_pos=18&_sid=46f706db6&_ss=r
Link to the nozzle holder on your pressure washer gun?
Hi. It’s this madcarcareproducts.com/products/mad-car-care-universal-nozzle-tip-holder
I need a link to that little rolling table.
Hi. It’s in the description but I’ll put it here also.
Salon Tray Trolley Cart With Wheels temu.to/m/u69d9riwb7g
another great video guys thanks
Thanks!
Great video!
Thanks!
Nice video Phil
Thanks!
hey Phil I saw you guys are using ar 630 pressure washer. How’s the machine performing? Planning to get it for my detailing studio here in delhi..India. Btw will soon be Gtechniq accredited, any piece of advice. Just subscribed 😊.
Hi. Yes we love it I had an oil leak out of one of the gaskets but it was an easy fix
ua-cam.com/video/zXk9WI-XA-c/v-deo.htmlsi=EBUxhNvDqc_HXDPp
Other than that it runs perfectly.
@@MirandaDetailing Thanks
Nice Video....Great learning Tool
Thanks.
What chemical you use for your prewash
Hi. It was Koch Chemie Super Foam.
bit.ly/3Rxjz3M
Thanks for the video 😊
What’s your pre wash soap solution?
Hi. Minute 10:13 I used the Pure:est Alkaline pre wash soap. But usually I use Super clean 1:10 in my IK pro 12 foamer.
Another Awesome video Phil! Been using Temu for a few years now but never tried there detailing products. Now I will, thanks for the vote of confidence to try them out..
Great video 👍☺️
Thank you
Good stuff right there
Fantastic Video
Thanks man!
How do you like that Clean and Protect?
I love it!
I bought the black water pressure can, and it leaked out the bottom as soon as i pumped it up, brilliant lol
Dang that sucks. Sorry. All 3 of mine are still working great
You guys use CSL even with access to all of the pro stuff regular people don't, this says something for this coating and will you be trying the new C6
Hi. So it all comes down to what our customers want and can afford. We definitely can apply CSU or Gyeon Infiniti coatings, but we also charge approximately for them. Most of our customers don’t need or want to pay for that. So CSL or the other Gyeon coatings are perfect for them. I do already have of of the C6 coatings, but not sure when I use it. 😎👍🏼
I ordered the same black foamer you used for the prewash, its complete trash. it doesn't hold pressure, once i pull the lever it releases all the pressure. damn temu
Aw that sucks. Sorry to hear that. I have 4 of them now and they all work fine. But who knows, sometimes you get crap. I have had expensive ones from Bigbio crap out the day i get them, two of them in fact. So even expensive, supposedly good quality tools are crap also.
You have an amazing wife helping you.
Not to brag…but I totally do! 🤣😎👍🏼
the brush with an angle i have one and this case the holes of the wheels are large enough and its easy to go around the wheel barrel
and you did a camaro
I work so fair I know for a school for students who has problems at school and want to learn to be a car mechanic also restoration classic cars
he has or had a red Alfa Romeo 3 doors 164 I think and took it to the automatic car wash 2 metal poles clear coat problems and wheels look awful I wash cars .and sometimes you as third party have to use what you getand could be very very simple
that's a huge towel. i like it
I love it!
Phil! I spy some Jimbo's products. How do you like them? I wasn't a fan of how bad he trashed cerakote but definitely curious if his stuff is any good. What are your thoughts?
Hi. I will be using them soon. I haven’t yet.
Thats our advantage here in Asia. Those 2L sparyers are $5 and those interior and tire brushes are $.50 each
Wow. Awesome.
Cool products😎
How many refills did the foam sprayer take to do the whole car?
Hi. Do you mean refilling of chemicals or hand pumping to keep it filled with compression?
@@MirandaDetailing both
@kmt_alen8373 I didn’t need to refill the chemical at all. I fact I was able to use it on 3 different vehicles. But as you may have seen in the video I would pump it up after about 2 panels or so. It’s very easy to hand pump it while using it.
I didn’t have to refill it at all with chemical. In fact I got about 3 vehicles out of this one fill. But as you may have seen I would hand pump it after a few panels. It’s very easy to hand pump on the fly.
Temu stuff is very expensive compared to other online merchants in my country
Aw sorry…then it’s probably not for you. We can get most things cheaper on TEMU here in the US.
I bought Some wheels to replace those office chair wheels they are roller blade wheels. Best for anything they work for. I got them off Amazon. But if you need to upgrade those wheels you will like them.
Thanks for the tip!
Great video….
Wishing you and the wife a prayerful and blessed Resurrection Sunday 🙏✝️🩸
Smurfe said he loved that sprayer
Wow! You and wifey have lost some weight! You guys are looking great since I last saw y'all! Why the beard? Gonna miss that young and boyishly good looks now! 😂 I have the Temu cannon and spray bottle, the one with the more brittle plastic that you can't put a Schrader valve on, and I must say, the foam cannon is pretty good! I still prefer the Griots Boss or MJJC cannons, but that guy surprised me, and I do use the measuring cup a lot! The foam sprayer, not so much on it, its lost its umph for me already. Hopefully you have better results. I should check out the other one you have. I'll be checking out your videos again, now that life is settling down here a little.
Thanks!
Nice car , would buy it too. I am German female ❤
Thanks! 😎👍🏼
One of the bortre is the same as fireball has
I like watching you open new stuff. Fun. Also gives me ideas. I bet the owner of the Camaro freaks out when they wash the car and the water and soap beads and sheets off. I know i do.
Now take the new portable table you just got and bring it in the house and push it down to the bedroom and serve Jess breakfast in bed. See.....multiple uses. Lol. Fun video Phil, hi wife!
Thanks! 🤣. Will do!!
Those hand pump foamers are better than the overpriced Mesto foamers
this video did pretty well
Yeah I’m surprised it did so well! I guess UA-cam loves branded videos.