What am I missing. 2022 raptor as well. But I don't have a 2 pin for the white connector at the first stop. It's a 3 pin. I see the Grey 2 pin. Also see a black 2 pin. But no mention of that.
Hay,iv just brought a raptor 700r 2015 plate,its got a twin big EVO black on but thats it,do i need one of these or will my quad be fine with out one? Appreciate any advice
Depending on your setup, you can either download a MAP from our database on our website or visit a local Authorized Dyno Center to have it professionally tuned to your configuration.
Max, we've got a few AutoTune videos for you: ua-cam.com/users/DynojetResearchsearch?view_as=subscriber&query=autotune. If you have questions, we're happy to answer them over email (powercommandertech@dynojet.com).
The PC6 now supersedes the PCV. You can find the PC6 available on our website now for the 2022 Raptor 700. www.dynojet.com/power-commander-6-for-2015-2020-yamaha-raptor-700-pc6-22074/
I bought one for a raptor 700 with a open airbox and stock exhaust but with the spark arrestor removed if and its tuned to this setup if i get a after market full exhaust do i have to tune it again ?
To maximize air/fuel ratio and efficiency of your motorcycle, it is recommended to equip your motorcycle with a tune when switching the configuration. You can find the different configurations of exhaust/air filters etc. in our tune database.
Should I use the power commander with stock exhaust? I will install a high flow filter. I want one because of the engine heat, but will I get a hp gain without the pipe? Thanks!
Hi! I have has the same problem with my 2018 700R. I also thought about replacing the foam filter with a K&N, but before you do that, check your radiator or get rid of your thermostat.
@@efrainmoreno6964 it comes with a tune for a completely stock model. We have tunes available for download on our website and if you would like to request a tune, you can reach out to us at powercommandertech@dynojet.com.
@@DynojetResearch thanks for your answer. I was getting ready to buy it this week since the dynojet customer support told me they are compatible. Thanks again keep up the hard work.
We now have the Power Commander 6 available for purchase. You can find more details on our website at www.dynojet.com and by filling out our drop-down menu for the make/model/year of you vehicle.
Dynojet Research, Inc. thanks I have another question after I installed everything as in this video my fuel pump won’t prime anymore therefore the engine doesn’t start, it does turn over but it doesn’t start, I’ve already replaced all of the fuses
Do not install this on a 2023 or a 24 700 what they won’t tell you is Yamaha change parts on the wiring harness for 23 to be able to hook up a diagnostic tool that is why the programmers caused the bike to throw engine code 33 and will not fire and it will leave you stranded take it or leave it. Everyone thinks they know everything, but I am speaking from experience along with hundreds of others, there’s a reason on the website that you cannot select a 2023 or 2024 yet
If you have a stock bike and just have a slip on leave it alone, I installed this on my 2023 raptor 700 R and after four hours it made it a $11,000 paperweight and had to remove it because the bike would not start these things are garbage and your bike does not like them despite what everybody says on those Facebook pages unless you’re doing a big kit and a KN air filter, leave it alone the stock computer will compensate for a slip on pipe, the code it will throw is 33. There’s a reason on all the websites they don’t offer one for a 2023-24, they changed the wiring harness in 23 and the programmer doesn’t pair well.
@@markeithsellers8522yes it is, I’m sorry just seen this, zero issues, they just push the programmers to make money your bike will compensate just fine with a slip on like a yoshi. Zero issues. Dyno proven
@@bigbeef8935what about a fall exhaust a big gun Evo black “I think it’s called” I brought it 3 days ago the only mod is the fall exhaust I think it’s still got the stock air box & not a K&N filter ect ? seems to run fine but I do see these channels & people saying you need one of these power commanders if running a fall exhaust? Appreciate any feedback
Thank you for doing this. It is nice to use this to ensure I was right prior to being assembled. Great job showing and explaining man.
Thanks for tuning in and for the positive feedback!
@@DynojetResearchHow do you solve Code 39 afterwards ????
Installed a PC5 to my 2022 Raptor 700 today. Very easy thanks to this video 👍
Awesome! Glad we could help. Enjoy the ride! 🔥
What am I missing. 2022 raptor as well. But I don't have a 2 pin for the white connector at the first stop. It's a 3 pin. I see the Grey 2 pin. Also see a black 2 pin. But no mention of that.
@@pestilencec11 Please reach out to our technical support at powercommandertech@dynojet.com
Besides the heavy mouth breathing it’s a great video
Bro you are a gift from god! Pay this man more!
HEAVY BREATHING
Is it the same on a PC6?
Pc5 basically lets anyone tune it with a laptop, it also has more things unlocked. PC6 can ONLY be tuned by licensed shops.
How do you solve Code 39 afterwards?
Quality video. Much appreciated
Thank you for the support!
Hay,iv just brought a raptor 700r 2015 plate,its got a twin big EVO black on but thats it,do i need one of these or will my quad be fine with out one?
Appreciate any advice
Is ot the same for older raptors?
Is it automatically tuned and ready to run once you connect the power commander or do you need to take it into a shop for tuning and computer work ?
Depending on your setup, you can either download a MAP from our database on our website or visit a local Authorized Dyno Center to have it professionally tuned to your configuration.
Does the install go the same for the 06-14 raptor
Please refer to the install guide listed with the product on our website.
www.dynojet.com/power-commander-v-for-2006-2014-yamaha-raptor-22-046/
Where is he located
And how fast is the raptor whit this
you guys plan on doing a auto tune install? i just got mine in the mail today
Max, we've got a few AutoTune videos for you: ua-cam.com/users/DynojetResearchsearch?view_as=subscriber&query=autotune. If you have questions, we're happy to answer them over email (powercommandertech@dynojet.com).
So what kind of gains can I ex
That works on my 2023 raptor 700r se?
Did you ever found out if it works??
How are y’all getting this module for the 2023 every time I go to any site it said it’s not available can you send me a direct link thanks
man, im in the same boat ...nothing seems to fit rigth in the 2023 . have you found something ?
So is this compatible with a 2022 model? You’ve said it is and isn’t in two other comments below.
The PC6 now supersedes the PCV. You can find the PC6 available on our website now for the 2022 Raptor 700.
www.dynojet.com/power-commander-6-for-2015-2020-yamaha-raptor-700-pc6-22074/
@@DynojetResearch Great, thanks.
Can I install it myself and then take it to a shop? Or will they just take it back out to tune it?
The shop will just need to be able to access the module.
@@DynojetResearch ok thank you
I bought one for a raptor 700 with a open airbox and stock exhaust but with the spark arrestor removed if and its tuned to this setup if i get a after market full exhaust do i have to tune it again ?
It is recommended that you tune your vehicle with performance upgrades.
I want to install dual empire exhaust, do I need a tune up or something in order to install the exhaust?
To maximize air/fuel ratio and efficiency of your motorcycle, it is recommended to equip your motorcycle with a tune when switching the configuration. You can find the different configurations of exhaust/air filters etc. in our tune database.
Should I use the power commander with stock exhaust? I will install a high flow filter. I want one because of the engine heat, but will I get a hp gain without the pipe? Thanks!
Todd, send us an email (powercommandertech@dynojet.com) and we can answer your questions. Thanks!
Hello I have the same question as Todd Merriott
Manuel, email us at powercommandertech@dynojet.com and we can help you out.
Hi! I have has the same problem with my 2018 700R. I also thought about replacing the foam filter with a K&N, but before you do that, check your radiator or get rid of your thermostat.
What would be the best map to download for a Yfz 450r 2021 with a yoshimura slip on exhaust ?
Is there a video like this but with a yfz 450r ?
Unfortunately, not at this time.
@@DynojetResearch Do you need to download a map for the tune to work or does it automatically work once installed without downloading a map ?
@@efrainmoreno6964 it comes with a tune for a completely stock model. We have tunes available for download on our website and if you would like to request a tune, you can reach out to us at powercommandertech@dynojet.com.
Does the power commander V to 2020 models can be connected to raptor 700r SE 2022?
The PCV will not be compatible with a 2022 model.
@@DynojetResearch thanks for your answer. I was getting ready to buy it this week since the dynojet customer support told me they are compatible. Thanks again keep up the hard work.
@@DynojetResearch
So is there an option at all for a 2022 model? Do
You need the PC6? I’m in the U.K.
Is this one different to the older looking pc5?
We now have the Power Commander 6 available for purchase. You can find more details on our website at www.dynojet.com and by filling out our drop-down menu for the make/model/year of you vehicle.
Can I install a 2015 power commander 5 on a 2008 se? Thanks
Unfortunately, no. They are different part numbers.
Do it work on a raptor 700r 2022
Yes
is this compatible with the 2022 raptor 700r se?
Yes, it is compatible with the 2022 model.
There’s a app to connect to the power commander?
No, we do not have an app available at this time.
So do I have to download the tune to the power commander first or do I install the power commander and then download the tune then start the engine
Either way works, Leonardo.
Dynojet Research, Inc. thanks I have another question after I installed everything as in this video my fuel pump won’t prime anymore therefore the engine doesn’t start, it does turn over but it doesn’t start, I’ve already replaced all of the fuses
@@jalisco872 You can email us at powercommandertech@dynojet.com and we're happy to help you out with that.
@@jalisco872 you hooked the wrong 3 prong, you hooked on the upper fuel rail but are supposed to hook on the lower right side of the throttle body.
hey i had a question about it, i have a leovince exhaust and i couldn't find the map to tune it. does it have a different name ?
Adil, email us at powercommandertech@dynojet.com and we can help you find a map!
What octane fuel should I use ?
Daniel, on a stock engine, 91 octane will be fine.
@@DynojetResearch outside CA we have 93 octane. Use it if you can! - Ohio
Rec 90 ethanol free
Hi, how many hp the raptor will e
increase? I've already a Leovince exhaust system (only final part not complete) and bmc air filter
Get a pro tec moflo airbox cover gives 3-4hp an better filtration! $90.
Why is he out of breath?
Entirely too much work. Take after the car community and make this a 1 or 2 step process. For now ill pass.
You had to start the quad
Do not install this on a 2023 or a 24 700 what they won’t tell you is Yamaha change parts on the wiring harness for 23 to be able to hook up a diagnostic tool that is why the programmers caused the bike to throw engine code 33 and will not fire and it will leave you stranded take it or leave it. Everyone thinks they know everything, but I am speaking from experience along with hundreds of others, there’s a reason on the website that you cannot select a 2023 or 2024 yet
If you have a stock bike and just have a slip on leave it alone, I installed this on my 2023 raptor 700 R and after four hours it made it a $11,000 paperweight and had to remove it because the bike would not start these things are garbage and your bike does not like them despite what everybody says on those Facebook pages unless you’re doing a big kit and a KN air filter, leave it alone the stock computer will compensate for a slip on pipe, the code it will throw is 33. There’s a reason on all the websites they don’t offer one for a 2023-24, they changed the wiring harness in 23 and the programmer doesn’t pair well.
Hey I have a 2023 700 just bought the slip on is your bike still running the same after not doing the tune also.
@@markeithsellers8522yes it is, I’m sorry just seen this, zero issues, they just push the programmers to make money your bike will compensate just fine with a slip on like a yoshi. Zero issues. Dyno proven
@@bigbeef8935what about a fall exhaust a big gun Evo black “I think it’s called” I brought it 3 days ago the only mod is the fall exhaust I think it’s still got the stock air box & not a K&N filter ect ? seems to run fine but I do see these channels & people saying you need one of these power commanders if running a fall exhaust? Appreciate any feedback
But on the 2021 model the Commander will do well ?
Traducir al español
Lo sentimos... tiene una pregunta?
Why are you breathing so hard sir