Yamaha Raptor 700 AIS Block Off Plate by Cuervo Racing - Stop the Popping
Вставка
- Опубліковано 22 лип 2024
- Stop the popping sounds attributed with adding an aftermarket exhaust and other upgrades to the 2015 and above Yamaha Raptor 700 ATVs. The AIR INDUCTION SYSTEM or AIS can cause an excessive amount of air to build up in the cylinder causing a popping sound during deceleration. This plate by Cuervo Racing eliminates that condition and STOPS THE POP.
Cuervo Racing AIS installation. Everything there is to know, it's simple stuff Raptor 700
• Video
Also from Cuervo Racing: What is the AIS Air Induction system and reed valve Raptor 700 atv
• Video
Cuervo Racing Ebay Store: www.ebay.com/usr/mrcuervoracing
Yamaha 700 Raptor 700R Cuervo POP STOP AIS BLOCK OFF TEST PLATE 2015 16 17 2019: www.ebay.com/itm/MADE-IN-USA-...
#yamaha
#atv
#quad - Авто та транспорт
Im I the only one who actually loves that popping sound? 😳
i know I am kind of randomly asking but do anyone know a good website to watch new series online ?
Great to see that you are back, I missed watching these.
Thanks for watching!
be sure to watch the entire video and enter our contest for a $50 gift card at RMATVMC
Just ordered two. One for me and one for my son. Thank you!
Awesome 👍 let me know how to like it once you get it installed. I felt it runs a lot better
You bet! Here is one of our riding vids. ua-cam.com/video/fhBIek3bRZ0/v-deo.html
We don’t run aftermarket headers, but we do run slip ons. We still get occasional deceleration pops. So I am really glad I watched your vid!
He's back! 😎
I'm alive! LOL
Great video
I think the next mod will be the rims 👍
Been a while!! Glad to see all is well! 💯💪
Be sure to check out the whole video. There is a giveaway hidden in there somewhere 😁
@@trailblogger haha!! You get a winner yet!?
Not yet!
@@trailblogger oh wow! Let me guess then! Lol Wheel spacers!?
@@TerrellSpivey close but nope
Nice Video. Glad you like it!
Hey! I just purchased your block of pate and it is in the tool box waiting for a stage 1. Would it Hurt anything to run this plate without exaust, intake and tuner?
Love all your videos with in depth and detailed installations. Seen in this video you relocated the ignition. Did you make a video on that? Looking to re-route my ignition sonic can install a Trail Tech GPS.
Yes I used a blowtorch and a hot socket on the end of an extension to poke a hole. Very fast and easy. Watch the video where I installed the Renthal Raptor Bend handlebars
@@trailblogger Awesome. Thanks again!!!
Love them graphics 🔥👌💯
thank you man
What a dream of a quad to own man your so lucky.
Thank you! I do feel lucky! But I have also worked very hard to be able to enjoy these expensive toys
TrailBlogger hard work pays off
Raptor looks and sounds great 👍
Thank you!!
be sure to watch the whole video, there is a hidden contest towards the end and no one has guessed correctly yet.
Great video!!!
I Like these easy upgrades.
Piece of cake!
Great video
What’s the link for the full Graphics they look good I would like to get it Thanks
Great video brother! 👊 love the rappy
I love it too!! No it's no banshee but it does scoot pretty good!
Does the popping harm the quad can I leave it like that?
Excellent
After installing do I have to do anything to ecu or anything like that
I see you still have the stock I take, any plans on upgrading that soon? I'm in the process of doing the big three myself now
Yes. Soon.
Does the 450 quads and dirt bikes have that
I did my AIS when I did my exhaust.
I’m guessing fci airbox or the monster box.
That's a bad ass bike, are those stock graphics? Love my 861cc cuervo build, great stuff comes out of there
861cc Cuervo build must be nasty! No they are custom graphics.
Great video and nice bike!! I have a 2014 raptor 700 and it’s always pulls to the right, could it be the tire pressure ? And also I here a clicking noise coming from the right front tire. Any guess what the problem might be
Wheel bearing or brake caliper or both.
TrailBlogger thank you
I love the back fire id never get rid of that
It is more about the engine running properly, too much air can cause a lean condition which means lots of heat
Is this a performance upgrade?
hi bro im from panama, nice vids bro, i have one question i dont like extreme loud exhaust but i see a lot of videos about exhaust for raptor 700 2020 and i see the barker, yoshimura and monster can u give me a recommendation for another exhaust or say something about the 3 i write here thanks bro!! sorry for my english!! i see a lot of videos but is hard to choose one on video in real life always is another history!!
those are all great choices but consider rossier also!
And thanks for the shootout
How about a plug for the electrical connector by the solenoid???
good idea. just wrapped mine in black tape.
Every day is convenient conversation. Passed
Ok!
Shot in the dark here but maybe lighting? Auxbeam cubes? Lol just a guess
definitely will be adding those in the future yes but not this time
Can you install the block pop stop if you only have oem exhaust system/pipe
yes it just blocks off the air port up there. aftermarket pipe is not required.
why would you take it off? i kinda like the pops and bang but does it hurt my engine?
Runs smoother without it in my opinion .
Is it swing arm?
Can I use with stock exhaust if I plan to upgrade my exhaust
Yes.
Hand gaurds??
I'm thinking Alba Beadlocks with GBC XC Masters
good guess and eventually definitely but not this time.
What year did these start on? I looked on my 06 and didn't see it. but maybe i'm just blind lol
2015 and up. my 08 raptor did not have it either.
I have a 2020 raptor 700, I put a cold air intake on it besides that it is stock it has been popping like your saying do you think if I did this to mine it would fix it?
doesnt stop it completely but it helps. popping can also be from the tune being off.
Im gunna guess the fuel customs intake. Why keep the stock one
I do plan on doing in intake, good guess but no the answer Im looking for now
My guess will be a new cam from cuervo
Good guess but that's not the next mod on the schedule. Feel free to guess again 👍
Did that seat come with your raptor or did you buy a different seat?
HT moto seat cover i stole from our 08 raptor because i like the grippy top more
Where are those trails at i just got a raptor 660
northern california
Wheels and tires
Where did you get that bad ass paint scheme?
It's a graphics kit, posted a video about it a couple of months back of you want to check it out.
I have a question that has nothing to do with the video but about the rev limiter and though well maybe someone can explain I see these stock raptor and they hit their rev limiter and makes that cool noise if you know what I mean. When I hit mine it just sounds like the rpms are to high no revlimiter noise just the rpms getting louder ! Is their something wrong with my raptor ? It’s a 2019 se
mind has an exhaust and tune. stock pipe is very quiet and restrictive
@@trailblogger ya just looking for some insight I’ve found multiple stock raptor that bounce of the limiter but mine just makes a loud revving noise .
i have a video of mine bouncing the rev limiter with stock exhaust in my HMF video. did you buy it new? someone bypass the limiter on yours?
@@trailblogger ya brand new out of the crate from my dealer I got on the forums not much is said about it but it could just not be working ! I’ll take a look at the video, I’m not to worried about it I never really try to hit the rev limiter just weird that mine doesn’t do it. THANKS i appreciate your time !
are you holding it pinned wide open?
Hows the fox shocks on front??🤗😉👍🏻
They are really nice on the straights but im not used to the cornering. Could be me or they could need professional adjustment. The need to carry a pump for adjustments is kind of a pain.
Can you please post a link of the video where I can hear how it sounds actually moving after this was done please!!!
this entire trip I had the AIS block off plate on ua-cam.com/video/DRTT5YC_XIo/v-deo.html
@@trailblogger Thanks brother I appreciate it, love your videos man. Keep up the good work. I have been copying you with all the mods and I just ordered my ais also from cuervo racing. I have a 2020 and it's poppin like crazy
it will smooth it out a lot! and thanks for watching man! post some vids of your quad!
@@trailblogger I sure will man. I'll keep in touch. I just need to make some more time for myself to ride again with the boys.
@@trailblogger Good morning ,hey quick question,what air intake should I do for the quad? I did the ecu flash but it's still popping but I'm running the stock air filter smh
2014 and older don’t have this correct?
Hkl
What would make 2000 warrior with HMF slip on make popping noise?
Running rich or lean, out of tune. Or an air leak in the intake causing a super lean condition.
@@trailblogger I have a zoom zoom carb, needle halfway, should I try dropping clip one more spot and raise needle?
@@trailblogger I checked timing, all good, no rips in intake boot, gonna check valve clearance tonight, just wondering if there is anything else that I should look into
@@johnsayman2271 sorry I've never tuned a zoom zoom carb, does it have a fuel meter like a lectron carb or is it jetted? Does it run any better with the choke on? If it does that means that it's on the lean side and needs more fuel. If the popping continues with the choke on even it may be too rich and you need to lean up your tune with less fuel
@@trailblogger its is identical to the mikuni,
Does the check engine light come on after installing
Nope
Does the pop mess up your quad?? I kinda like it to be honest
a slight pop is ok but these things come tuned very lean from the factory which can make them run hotter than needed and it is already 110F here in the summer. Adding more fuel to richen the mixture with a proper tune helps make the bike run smoother. the AIS injects extra air into the system. I don't care so much about the pop as I do about it running correctly. backfires can be a sign of too much fuel or not enough fuel in some cases
What bumper is that??
HMF bumper
please provide new ebay link for block of plate.ty
here it is, thank you for letting me know it was broken www.ebay.com/itm/MADE-IN-USA-Yamaha-700-Raptor-Cuervo-POP-STOP-AIS-BLOCK-OFF-TEST-PLATE-2015-20/274444309264
Thank u
Air Intake will be the next mod!
I plan to do the intake, good guess but that's not up next. Feel free to guess again 👍
Trail Blogger pretty sure i'm wrong, but I guess you will go for new or revalved rear shock absorber
@@yxiscatti another very good guess, I added a 2017 SE rear shock when I did the fox fronts, a rebuild on the rear would be a good idea but it's fine for now
@@trailblogger tusk +2 rear axle
@@yxiscatti you are correct but someone else guessed correctly first. Thanks for leaving comments though! We'll have another contest soon!
it would have been easier to sandwich the block off plate using longer bolts. that way you dont need to mess with any of the wiring and tubing. plus it makes it look like its never been modified.
I prefer less clutter. less wires and tubing
next mod: GBC XC Master tires and Alba beadlock wheels
good guess and eventually yes but not the next mod I'm doing.
Steering stabilizer
dominator rear axle
I installed one of these block plates and now she’s running hot, the spark plug wire going back to module the wire start to melt. The wire was 3-4 inches from the exhaust pipe. Never was a problem before
sounds like an air leak causing it to run lean
@@trailblogger air leak wear
@@chrisrieger9201 where you installed the block off. if you suspect it is causing a problem just put it back on. takes 5 minutes
when you install the plate you leave the pieces inside and put the plate over it.
@@trailblogger correct and I cap it at the air cleaner box, tape the wire connector electrical tape
hi, did you have any problem with the 700 raptor because of the AIS block off plate ? thanks
no issues
@@trailblogger I got one coming now, but why does it do actually do besides the noise get a permit for give me more power?
Blocks off the extra air making it easier and more reliable to tune
Next mod is
-extended rear axle
-Fuel customs intake
Yes!
But which one next of those 2 ?
Need your answer! Which one first? Which one is next? 😬
TrailBlogger extended rear axle!
FRG95 YES. WINNER. Please email me your email address privately atvtrailblogger@gmail.com and I will send you your gift card! 👍😀
Did this to my 2020 with HMF pipe and Optimizer ... guess what ... no pop lol
nice!
Well hello trail blogger were you been hiding haha!
lol I'm alive!
TrailBlogger how is it down there w this virus bs going on?
@@ononewheel7 not much activity here in my county but of course the whole state is pretty much on lockdown. just gonna stay home and turn wrenches in the garage.
TrailBlogger nice
Well stay safe man i think lockdown is coming for is soon keep hearing about it so well see!
@@ononewheel7 same to you and your family. Stay safe over there
Good job light might come on
I hope not! LOL thanks for watching
Rear axle
I’d have to say an urmosi thumb throttle for the next mod .
Good guess but no
TrailBlogger hmm , trail tech tach ! Lol
@@raptordan6851 another good guess but no
TrailBlogger I give up haha
Light led’s ??
Hid’s
No and no but good guesses. Any others?
next mod: alba racing nerf bars
Good guess but not the one I'm looking for
Remap the ECU?
done already, I'm running the Alba ECU flash.
Sounds awesome!! May be a turbo next!!😂 anyway keep the video's coming! The parts that you ride look unreal, would love to come over from Wales to ride one day!! Hopefully this coronavirus goes away as quickly as it started!! All the best.
Where can I get one!
Cuervo racing, but what year is your raptor? you only need one for 2015 and up raptor 700s
TrailBlogger I have a 2007 raptor with a big gun exhaust slip on
I blocked off as well , I don’t need to be running lean or have a solenoid malfunction !!!!
Exactly
TrailBlogger you know what I’m talking about , and that’s why I subscribe to you !
@@raptordan6851 thanks for the sub!
be sure to watch the whole video, there is a hidden contest towards the end and no one has guessed correctly yet.
TrailBlogger hmm , a lot of guess so far . I’m going to take a shot in the dark and say an urmosi thumb throttle .
Is there anyway to screw this up? 🤔
i mean, anything is possible lol. strip them, forget to put the flap back in etc
Do you think the raptor is faster than the yfz
Depends on rider and terrain.
TrailBlogger in the street and both are good drivers
@@bigstevegapping6315 sorry I've really never rode in the street
TrailBlogger what about on dirt
@@bigstevegapping6315 raptor more torque off the line and overall HP. Yfz450 better handling and overall mid range performance with weight taken into consideration. Yfz is more race oriented while the raptor is considered a recreation trail machine. Both machines can be modified for drag, dune, street riding depending on what you want.
Tusk axle
I love the popping tho😭
Me too 😬
thats cool just leave it then!
@@trailblogger can that popping make any damage to the engine ?
Tires?
good guess but no
@@trailblogger alba beadlock wheels
Skid plates
that would be great! but not the answer
Galfer brake lines is my guess
Good guess but no. Guess again?
TrailBlogger Can we get a hint? Is it related to brakes?
TrailBlogger I’ll have to guess an ECU mod kit or something
@@rajkirannatarajan9276 another good guess but no. I am running the Alba ECU tune.
I’d say a new intake
Good guess but not the answer we're looking for. Feel free to guess again
Power commander 5
Very good guess but no.
Nerf bars
First
Your killing the forest man by removing this
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Rolling coal with my raptor 700
TrailBlogger lol
Mine is deleted too haha!
Did you get an engine light after?
@@ononewheel7 negative. no light yet.
but why?
it runs smoother.
@@trailblogger aha
I do not like the taste of the peaches
Why not? They are good