Making the Fretboard and Shaping the Neck | Building an Acoustic Guitar
Вставка
- Опубліковано 6 лют 2025
- After getting the neck roughed out in the last episode, its now time to get the neck done. My first task is to cut the mortise and tenon for the neck joint. I'm using a special jig and a trim router to make these cuts. After the cots are done, I'll install the threaded inserts into the neck tenon and drill the corresponding holes in the body. With that complete, I can start making the fretboard. I'm using a sweet piece of Bolivian Rosewood I got from Waldrop Guitars. As soon as the fretboard is glued into place, I'll use my trusty Shinto Rasp and a ton of other carving tools to get the neck shaped. This is such a fun process to see the neck come to life. This project is getting very close to the finishing stage, and I can't wait.
-- Affiliate (Commissions Earned) Links to Products Used --
Shinto Rasp - amzn.to/3O0C64V
Nicholson Needle Files - amzn.to/3DSayu4
Mirka Sandpaper Assortment - amzn.to/3A9nD17
Mirka 80 Grit PSA Sandpaper - amzn.to/3E3Wy0x
Stew Mac Fret Slotting Saw - amzn.to/3fW62mf
Fret Slotting Miter Box - amzn.to/3E3BN4S
Machinist Square Set - amzn.to/3tlxgpp
Quick Grip Clamps - amzn.to/3TsOSuq
Creality Ender 3 v2 3D Printer - amzn.to/3O0Q8DC
Waldrop Guitars - waldropguitars...
Zimbelman Guitars - zimbelmanguita...
Eric Schaefer Guitars - www.ericschaef...
Fretboard Markers - • Carving an Acoustic Gu...
Guitar Neck Carving Buck - / jb5bmplt4k
-- Visit My Website--
www.homebuiltw...
-- Check Out My Handmade Guitars --
www.hayleyguit...
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Ways To Support HBW --
www.homebuiltw...
-- My TeeSpring Store --
teespring.com/...
-- Check out my Amazon Shop --
www.amazon.com...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#acousticguitar #guitarbuilding #homebuiltworkshop
looking great Jeff. And You're welcome. Gonna be a beautiful guitar.
Use a plastic straw cut at a 45 to run along the glue line and clean up the squeeze out , works great !
Loving this build... Killer fretboard!
Thanks for sharing your process. It's coming along nicely!
Thanks, Its getting there.
Another great video brother.
Do you notice any difference of harness in the sapwood on the fretboard? I’ve always thought that looks cool!
Great video. Have you done the neck profile with your router carving jig as well?
Can I have the information on the mortise jig thanks buddy
Id love a video on how to make that mortise and tenon jig are there plans available?
They're in the works. I'll make a video when it's ready to go.
Goods