while its fresh in my head they say RED is equivalent to 400 grit and GREY is equivalent to 800 grit 👍👍 i only use red before primer and grey for everything else 👊👊👊
Hi Mate, I didn't know that, I'm like you, I use grey most of the time, it make sense that grey is 800 and red is 400, as I've always thought there should be something in between as the difference seems a lot, hearing the 400 v 800 analogy makes perfect sense, thank Grant 😊
@peteshobbies5383 I've got some purple scotch pads in Dura-Gold brand that are in between red and gray. They're advertised as 600 grit which makes sense.
24 дні тому+1
Thanks Pete for all your input and testing. I needed to spray a cargo bicycle frame and needed a gun, being limited to a minimal 60€ budget, this w101 clone fit my needs perfectly. Got it with a 0.8, 1.3 and a 1.8 nozzle. A full basic set. Main issue was finding a quick connect for it as the Chinese one did not fit any of the standard hoses here in Latvia. So far I've gotten great results, the finish is nice, I did get a couple of clear drips here and there, but as a learning tool, this gun is perfect. Thanks once again! And keep up the good work, would like to see your entire gun collection one day!
Hi Mate, These are some of the first Chinese guns I brought and are pretty good and great for the money. As you say, they are available in many sizes, and they seem reliable. Keep us updated on how they are going as it gives people reading these more views than just mine , cheers buddy, and thank you 😊
Love the videos as always Pete! In a different one you mentioned how you liked side cups and thought they were as easy if not easier than top cups so I decided to get one of these 101s. Any suggestions on the easiest way to plumb in a pps adapter?
Hi Pete, another great video mate it was nice to see you do the prep work which so far is pretty much the same as I do so it looks like I've learned something over the past couple of years🤨😅I find I don't need a high build primer so much these days so the Novol I use is a primer surfacer or a WoW so I mix it half way between the two which gives me slightly more build than a WoW mix I then sand that flat using guid coat with some P800 then it's ready for basecoat, the good thing about that is it cures in a couple of hours then I can sand it the same day👌👍 I'm surprised you are having all that trouble with the Iwata guns when the copies seem ok, do they both use the same air valve? if so have you tried swapping them between the copy and the original🤔it's really bad QC from Iwata when you are paying for a premium product but it's worse than the copy🙄🤦♂cheers Pete I'm looking forward to the next one👍
Hi John, It depends on temperature, but at say 20c, the Upol is OK to sand in a few hours. The problem with me is that it's normally cooler, so I just leave it overnight, but can do things same day it needed, normally that's outside 😅 I don't know if the parts are interchangeable to be honest , I will check one day, cheers mate 👍
Hi Pete I think I've said this before there is a market for knock offs but having been in the paint game all I can say is not for me in a professional environment but DIY guys give them a go but be open minded, minded, thanks for the video mate 😊😊😊😊😊
Hi Dean, Hope you're well, mate 👍 , I do see both sides of the argument but certainly in my case, with these, it made me by the real thing so I don't think it's all bad for the genuine manufacturers, cheers Dean 👍
Hi Grant, Yeah, I was just doing a favour really, the weather was rubbish, so I took it off to save dodging the rain, it came out well, there's a few more of this along the line but I got the colour match just right which makes it much easier as you will know, hopefully the cold weather isn't going to play havoc with your schedule, cheers mate 👍
สวัสดีคุณพีท ฉันอยากทำสีจักรยาน ฉันอยากทราบว่า china w-101 1.3 หรือ china sti pro mini-888 อะไรจะเหมาะกับการพ่นสีจักรยานมากกว่า ตอนนี้ฉันมี Aeropro A610 1.3 ฉันรู้สึกว่ามันไม่ค่อยจะเหมาะ หรือคุณมีกาพ่นสีจากจีนตัวไหนมาแนะนำอีกไหม
while its fresh in my head they say RED is equivalent to 400 grit and GREY is equivalent to 800 grit 👍👍 i only use red before primer and grey for everything else 👊👊👊
Hi Mate, I didn't know that, I'm like you, I use grey most of the time, it make sense that grey is 800 and red is 400, as I've always thought there should be something in between as the difference seems a lot, hearing the 400 v 800 analogy makes perfect sense, thank Grant 😊
@peteshobbies5383 I've got some purple scotch pads in Dura-Gold brand that are in between red and gray. They're advertised as 600 grit which makes sense.
Thanks Pete for all your input and testing. I needed to spray a cargo bicycle frame and needed a gun, being limited to a minimal 60€ budget, this w101 clone fit my needs perfectly. Got it with a 0.8, 1.3 and a 1.8 nozzle. A full basic set. Main issue was finding a quick connect for it as the Chinese one did not fit any of the standard hoses here in Latvia.
So far I've gotten great results, the finish is nice, I did get a couple of clear drips here and there, but as a learning tool, this gun is perfect. Thanks once again! And keep up the good work, would like to see your entire gun collection one day!
Hi Mate, These are some of the first Chinese guns I brought and are pretty good and great for the money.
As you say, they are available in many sizes, and they seem reliable. Keep us updated on how they are going as it gives people reading these more views than just mine , cheers buddy, and thank you 😊
great job pete bumper looked well 👍👍
Thanks Grant 👍
Really enjoyed this format Pete. More please.
Hi Mate, Yes, I'll try too. Cheers 👍
Another great one, mate!
Thanks Ben, much appreciated as always 👍
60 seconds in and a thumbs up all ready.
Hi Andy, Thanks, mate. I know I sometimes go a bit off topic 🫣 but hopefully, it's not too bad, much appreciated 👍
Very interesting. Great video
Thanks, buddy, much appreciated 👍
Love the videos as always Pete! In a different one you mentioned how you liked side cups and thought they were as easy if not easier than top cups so I decided to get one of these 101s. Any suggestions on the easiest way to plumb in a pps adapter?
Hi buddy, you can buy the PPS adapters easy enough on Aliexpress, 3m make them also
Hi Pete, another great video mate it was nice to see you do the prep work which so far is pretty much the same as I do so it looks like I've learned something over the past couple of years🤨😅I find I don't need a high build primer so much these days so the Novol I use is a primer surfacer or a WoW so I mix it half way between the two which gives me slightly more build than a WoW mix I then sand that flat using guid coat with some P800 then it's ready for basecoat, the good thing about that is it cures in a couple of hours then I can sand it the same day👌👍
I'm surprised you are having all that trouble with the Iwata guns when the copies seem ok, do they both use the same air valve? if so have you tried swapping them between the copy and the original🤔it's really bad QC from Iwata when you are paying for a premium product but it's worse than the copy🙄🤦♂cheers Pete I'm looking forward to the next one👍
Hi John, It depends on temperature, but at say 20c, the Upol is OK to sand in a few hours. The problem with me is that it's normally cooler, so I just leave it overnight, but can do things same day it needed, normally that's outside 😅
I don't know if the parts are interchangeable to be honest , I will check one day, cheers mate 👍
Hi Pete I think I've said this before there is a market for knock offs but having been in the paint game all I can say is not for me in a professional environment but DIY guys give them a go but be open minded, minded, thanks for the video mate 😊😊😊😊😊
Completely agree. If i were painting for my bread and butter it would be premium guns all the way. But these cheaper guns def have their place.
Hi Dean, Hope you're well, mate 👍 , I do see both sides of the argument but certainly in my case, with these, it made me by the real thing so I don't think it's all bad for the genuine manufacturers, cheers Dean 👍
what is this i see before me!!! a bumper sir!! ohh i say 😂😂😂😂
Hi Grant, Yeah, I was just doing a favour really, the weather was rubbish, so I took it off to save dodging the rain, it came out well, there's a few more of this along the line but I got the colour match just right which makes it much easier as you will know, hopefully the cold weather isn't going to play havoc with your schedule, cheers mate 👍
สวัสดีคุณพีท ฉันอยากทำสีจักรยาน ฉันอยากทราบว่า china w-101 1.3 หรือ china sti pro mini-888 อะไรจะเหมาะกับการพ่นสีจักรยานมากกว่า
ตอนนี้ฉันมี Aeropro A610 1.3 ฉันรู้สึกว่ามันไม่ค่อยจะเหมาะ หรือคุณมีกาพ่นสีจากจีนตัวไหนมาแนะนำอีกไหม
Hi buddy, A Chinese W101 in 1.0 would be better, or one of the Sri Pro Lite copies in 1.0
@peteshobbies5383 ขอบคุณมาก คุณพีท
You're welcome 😊
@@peteshobbies5383 w-101 (1.0 E1) สามารถพ่นรองพื้น 2k 3/1 ได้ใช่ไหม หรือควรขยับไป (1.3 H2) คือฉันแอบสับสนเล็กน้อย ในสเปค (1.0 E1) ระบุต้องการลม 2.9บาร์ 270 ลิตร/นาที ในขณะที่ (1.3 H2) ต้องการแค่ 2.4บาร์ 225ลิตร/นาที หรือสเปคพวกนี้ใช้อ้างอิงกาพ่นสีจากจีนไม่ได้
@@peteshobbies5383 w-101 101G( 1.0 E1) สามารถใช้พ่นรองพื้น 2k 3/1 ได้ใช่ไหม หรือ ฉันควรขยับไป 132G(1.3 H2) ขอโทษที่รบกวน